The nonferrous metal mines in China are rapidly depleting due to years of mining, and it has become difficult to identify new mineral resources in the periphery of the old mining area. In order to deal with this situation, advanced technologies and equipment must be deployed. The borehole transient electromagnetic method (TEM) has become a key technology due to its deep investigative capabilities within conductive geological structures. In the present study, in order to meet the exploration needs at depths of less than 3000 m, surface-borehole TEM exploration was used to analyze the characteristics of electromagnetic signals generated by a long wire source and a large loop source, providing essential data for the development of key technologies, such as sensor parameter design and signal gain optimization of the TEM system in the borehole. This study discussed in detail two key technical problems as follows: firstly, the efficient synchronization mechanism between the ground transmitter system and the borehole electromagnetic signal acquisition system ensured the accuracy and timeliness of data acquisition; and secondly, the realization of mass storage technology, which effectively solved the problem of mass storage and real-time transmission of data in a deep borehole environment. The effectiveness of the surface-borehole TEM systems with a long wire source and a large loop source was verified by tests in real mines. The surface-borehole electromagnetic signal acquisition system developed in this study effectively collected electromagnetic signals in the borehole, and the results accurately reflected the stratigraphic information of mineral resources in the study area. This study can pave a new technical path for the exploration of deep and peripheral areas of non-ferrous metal mines and provide valuable experience and insights for mineral resource exploration in similarly complex geological environments.

When encountering sedimentary rocks with obvious laminations or fracture development zones, the conductivity of the conductive medium in different directions will change significantly, and the subsurface medium will exhibit macroscopic conductivity anisotropy. To analyze the impact of electrical anisotropy on the surface–borehole transient electromagnetic exploration method, we used the finite element method to investigate the electrical anisotropy surface–borehole transient electromagnetic three-dimensional (3D) forward algorithm, in which we used a tetrahedral mesh to spatially discretize the time–domain Maxwell equation. Then, we discretized it using the second-order backward Eulerian difference method, and we obtained the fields through the PARDISO solver. The validity and correctness of the algorithm were verified through comparison of a one-dimensional (1D) anisotropic model, a complex three-dimensional (3D) isotropic model, and a three-dimensional (3D) anisotropic half-space model. A typical anisotropic geological model was constructed to analyze the effects of anisotropic strata and anomalies in the different principal axis directions on the surface–borehole transient electromagnetic response. The results show that the response of the anisotropic medium is related to the direction of the transmitting source, and the response pattern is complex and volatile. The electrical anisotropic anomaly does affect the amplitude, which should be given special attention when performing surface–borehole transient electromagnetic inversion interpretation.