The environmental impact of CO₂ emissions is widely acknowledged, making the development of alternative propulsion systems a priority. Hydrogen is a potential candidate to replace fossil fuels for transport applications, with three technologies considered for the onboard storage of hydrogen: storage in the form of a compressed gas, storage as a cryogenic liquid, and storage as a solid. These technologies are now competing to meet the requirements of vehicle manufacturers; each has its own unique challenges that must be understood to direct future research and development efforts. This paper reviews technological developments for Hydrogen Storage Vessel (HSV) designs, including their technical performance, manufacturing costs, safety, and environmental impact. More specifically, an up-to-date review of fiber-reinforced polymer composite HSVs was explored, including the end-of-life recycling options. A review of current numerical models for HSVs was conducted, including the use of artificial intelligence techniques to assess the performance of composite HSVs, leading to more sophisticated designs for achieving a more sustainable future.

Thermoset polymers offer great opportunities for mass production of fiber-reinforced composites and are being adopted across a large range of applications within the automotive, aerospace, construction and renewable energy sectors. They are usually chosen for marine engineering applications for their excellent mechanical behavior, including low density and low-cost compared to conventional materials. In the marine environment, these materials are confronted by severe conditions, thus there is the necessity to understand their mechanical behavior under critical loads. The high strain rate performance of bonded joints composite under hygrothermal aging has been studied in this paper. Initially, the bonded composite specimens were hygrothermal aged with the conditions of 50 °C and 80% in temperature and relative humidity, respectively. After that, gravimetric testing is used to describe the moisture diffusion properties for the adhesively bonded composite samples and exhibit lower weight gain for this material. Then, the in-plane dynamic compression experiments were carried out at different impact pressures ranging from 445 to 1240 s⁻¹ using the SHPB (Split Hopkinson Pressure Bar) technique. The experimental results demonstrated that the dynamic behavior varies with the variation of strain rate. Buckling and delamination of fiber are the dominant damage criteria observed in the sample during in-plane compression tests.

The vertical axis wind turbine (VAWT) design has several advantages for offshore wind turbine installation. The VAWT provides omnidirectional wind power, and its mechanical rotating mechanisms can be installed near sea level. In this paper, the selection of a suitable composite material for floating H-Darrieus-type wind turbines with three-stage rotors and its properties are discussed. The centrifugal forces acting on the composite blades are compared to the values of these forces evaluated on the aluminum blades. Abaqus software is used for numerical simulations. The selection of appropriate laminations used to model the composite materials is discussed. The optimum combination of selected layers is determined to reduce the values of maximum bending stresses and displacements, resulting in a high strength-to-weight ratio. In the post-processor, a path is taken at the location of the application of the maximum load on the blade and the values of the displacements and stresses along this path are determined. These maximum values are compared to the unidirectional strength of the selected composite material to ensure a safe design.

This research paper focuses on investigating the thermal conductivity behavior of polymer matrix composite materials, specifically those composed of PSU and BaTiO₃, both experimentally and numerically. The thermal conductivity of composites has been studied using a variety of theoretical and semi-empirical methods. However, in cases where the filler concentration is minimal, these models provide a superior estimate. To numerically resolve the thermal heat transfer for an elementary cell, the finite element method is employed in this study. The impact of contact resistance, barium titanate percentage, and quenching temperature on the composite’s effective thermal conductivity and dynamic behavior is given consideration. The results demonstrate that the suggested numerical model is in good agreement with experimental measurements as well as Hatta–Taya and Hashin–Shtrikman’s analytical models. The results provide significant insight into the thermal conductivity behavior of composites, which can inform the development of more effective thermal management solutions for composite materials. Effective thermal management is critical for the successful application of polymer matrix composite materials in various engineering applications. Thermal conductivity is a key factor in thermal management and is influenced by factors such as the concentration of filler particles, their shape, size, and distribution, and the matrix material’s properties.