The aim of the present investigation is framing the effect of thermal radiation and slip on a magnetohydrodynamic (MHD) Casson nanofluid flow over a stretching surface under the influence of variable viscosity and convective boundary condition. First, non-dimensionally developed boundary layer equations are deduced with suitable transformations. Then they are solved numerically by the Runge–Kutta–Fehlberg method with the shooting technique for different values of parameters. The most relevant result of the present study is the fact that the augmented magnetic field strength, Casson fluid parameter, and the inclined angle undermine the flow velocity, establishing thinner hydrodynamics boundary layer, while the thermal slip and radiation parameters show the opposite trend. Another most important outcome is the fact that increase in the Prandtl number, radiation, viscosity, thermal slip, and radiation upsurges the fluid temperature, leading to improvement in the thermal boundary layer. The effects of different natural parameters on the skin friction coefficient and the Nusselt and Sherwood numbers are examined graphically. For a limiting case of the present model, the obtained solution was found to be in excellent agreement with the existing literature.
9 April 2025 in Multiscale and Multidisciplinary Modeling, Experiments and Design
Carbon nanotubes (CNT) are used in a variety of applications, including energy storage, device modelling, automotive parts, water filters, thin-film electronics, coating etc. The present article investigates the steady three-dimensional (3D) magnetohydrodynamics (MHD) rotating flow of water based nanofluid containing CNT namely SWCNT and MWCNT past a stretching/shrinking sheet in occurrence of magnetic field and homogeneous-heterogeneous chemical reactions. Further, the heat transfer phenomena is analyzed in presence of thermal radiation and heat source/sink. The governing partial differential equations (PDEs) are converted to non-linear ordinary differential equations (ODEs) by using suitable similarity transformations, and then solved numerically using bvp4c code of MATLAB software. The impacts of magnetic field, rotational, suction/injection, thermal radiation, heat source/sink parameters, nanoparticle (NP) volume fraction, and homogeneous and heterogeneous reactions on the velocity, temperature, and concentration profiles as well as the skin friction coefficient and Nusselt number are presented in graphs and tables. It is found that The primary velocity decreases while the second velocity increases for higher values of rotational parameter and the flow dominates in MWCNTs the SWCNTs.
In this article, the impact of MHD Casson Nanofluid boundary layer flow, over an inclined extending surface with thermal radiation, heat source/sink, Soret and Dufour, is scrutinized. The model used in this study is based on the Buongiorno model of the thermal efficiencies of the fluid flows in the presence of Brownian motion and thermophoresis properties. The non-linear problem for Casson Nanofluid flow over an inclined channel is modeled to gain knowledge on the heat and mass exchange phenomenon, by considering important flow parameters of the intensified boundary layer. The governing non-linear partial differential equations are changed to ordinary differential equations and are afterward illustrated numerically by the homotopy analysis method (HAM). Numerical and graphical results are also presented in tables and graphs. It has been noticed that increasing the inclination parameter reduces the amount of friction experienced by the surface, but it has the opposite effect on the Nusselt number and the Sherwood number. In the concentration field, the inclination parameter reveals a decreasing trend, in contrast to the chemical reaction rate parameter, which reveals an increasing trend in the opposite direction. Likewise, the present results are noticed to be in an excellent agreement with those offered previously by other authors. Finally, some of the physical parameters in this study, which can serve as improvement factors for heat mass transfer and thermophysical characteristics, make nanofluids premium candidates for important future engineering applications
7 January 2019 in Multidiscipline Modeling in Materials and Structures
Purpose: The purpose of this paper is to examine the magneto hydrodynamic flow and heat transfer of nanofluids over a permeable wedge based on engine oil which is under the effects of thermal radiation and convective heating. Design/methodology/approach: The equations governing the flow are transformed into differential equations by applying similarity transformations. Keller box method is used to bring out the numerical solution. Findings: The discovery interprets that temperature as well as the velocity of Ag-engine oil nanofluids are more noticeable than Cu-engine oil nanofluids. Thermal boundary layer increases for radiation parameter as well as Biot number. Fluctuations of co-efficient of drag skin friction as well heat transfer rate at the wall are also tested. Originality/value: Till now, no numerical studies are reported on the heat transfer enhancement of the permeable wedge under thermal radiation on engine oil nanofluid flow by considering convective heating.