The continuous improvements in micro-forging technologies generally involve process, material, and tool design. The field assisted sintering technique (FAST) is a process that makes possible the manufacture of near-net-shape components in a closed-die setup. However, the final part quality is affected by the influence of friction during the ejection phase, caused by radial expansion of the compacted and sintered powder. This paper presents the development of a pre-stressed tool system for the manufacture of micro gears made of aluminum. By using the hot isostatic pressing (HIP) sintering process and different combinations of process parameters, the designed tool system was compared to a similar tool system designed without a pre-stressing strategy. The comparison between the two tool systems was based on the ejection force and part fidelity. The ejection force was measured during the tests, while the part fidelity was documented using an optical microscope and computed tomography in order to obtain a multi-scale characterization. The results showed that the use of pre-stress reduced the porosity in the gear by 40% and improved the dimensional fidelity by more than 75% compared to gears produced without pre-stress.
In the past, robotic assembly has required rigid fixturing and special purpose robotic tools for every assembly component. Unfortunately, rigid fixtures and special purpose robotic tools often have to be customized for varying geometries. Alternatively, it is possible to operate in a semi-structured environment, defined by the use of softer fixtures (e.g. pickup bin) and softer robotic tools (e.g. suction cups or compliant pads) that can be used for many assembly applications without modification, but they demand specific motion plans that can tolerate greater positional uncertainty. We have developed a system that supports autonomous generation of parameterized fine motion plans for assembly that are robust under positional uncertainty and compliance introduced by the use of a suction cup instead of a gripper. To accomplish this a classifier is trained, implemented and tested for performance in the semi-structured environment for distinguishing between a failed or successful assembly. The trained classifier is then integrated with the entire system and many robot-attended experiments are performed that vary the fine motion parameters, and optimize them for successful outcomes using an Interval Estimation optimization algorithm. An approach to machine learning based on Support Vector Machines and Principal Component Analysis is used to make the optimization autonomous. We achieved a 99.7% classification accuracy with the trained classifier and by running repeated robot-attended experiments with artificial positional uncertainty and optimizing fine motion parameters, we were able to achieve a 38% improvement compared to fine motion plans with initial best guess parameters.
Current manufacturing of precision tools for machining typically requires processes such as grinding, EDM or laser processing in order to comply with high requirements on tolerances. However even tools manufactured by these processes come short, when a new batch of workpieces are supplied, and their tolerances are not compliant. This approach presents a precision broaching tool for adjusting the inner diameter of an external broach. The tool compensates for the manufacturing tolerance chain of tool and workpieces by up to 37 μm. The approach is based on conventional shrink fitting of cold forging tools. A numerical and analytical model of the compression is compared with experimental results.