The paper contributes towards the modeling, identification, and control of model jet engines. We propose a nonlinear, second order model in order to capture the model jet engines governing dynamics. The model structure is identified by applying sparse identification of nonlinear dynamics, and then the parameters of the model are found via gray-box identification procedures. Once the model has been identified, we approached the control of the model jet engine by designing two control laws. The first one is based on the classical Feedback Linearization technique while the second one on the Sliding Mode control. The overall methodology has been verified by modeling, identifying and controlling two model jet engines, i.e. P100-RX and P220-RXi developed by JetCat, which provide a maximum thrust of 100 N and 220 N, respectively.
19 November 2021 in IEEE Robotics and Automation Letters
Effective control design of flying vehicles requires a reliable estimation of the propellers’ thrust forces to secure a successful flight. Direct measurements of thrust forces, however, are seldom available in practice and on-line thrust estimation usually follows from the application of fusion algorithms that process on-board sensor data. This letter proposes a framework for the estimation of the thrust intensities on flying multibody systems that are not equipped with sensors for direct thrust measurement. The key ingredient of the proposed framework is the so-called centroidal momentum of a multibody system, which combined with the propeller model. It enables the design of Extended Kalman Filters (EKF) for on-line thrust estimation. The presented approach tackles the additional complexity in thrust estimation due to the possibly large number of degrees of freedom of the system and uncertainties in the propeller model. For instance, a covariance scheduling approach based on the turbines RPM error is proposed to ensure a reliable estimation even in case of turbine failures. Simulations are presented to validate the proposed algorithm during robot flight. Moreover, an experimental setup is designed to evaluate the accuracy of the estimation algorithm using iRonCub, a jet-powered humanoid robot, while standing on the ground.
This paper introduces a Data-Fused Model Predictive Control (DFMPC) framework that combines physics-based models with data-driven representations of unknown dynamics. Leveraging Willems’ Fundamental Lemma and an artificial equilibrium formulation, the method enables tracking of changing, potentially unreachable setpoints while explicitly handling measurement noise through slack variables and regularization. We provide guarantees of recursive feasibility and practical stability under input–output constraints for a specific class of reference signals. The approach is validated on the iRonCub flying humanoid robot, integrating analytical momentum models with data-driven turbine dynamics. Simulations show improved tracking and robustness compared to a purely model-based MPC, while maintaining real-time feasibility. Code: https://github.com/ami-iit/papergorbanielobaid2025lcssdfmpc-ironcub.
Jet-powered vertical takeoff and landing (VTOL) drones require precise thrust estimation to ensure adequate stability margins and robust maneuvering. Small-scale turbojets have become good candidates for powering heavy aerial drones. However, due to limited instrumentation available in these turbojets, estimating the precise thrust using classical techniques is not straightforward. In this paper, we present a methodology to accurately estimate the online thrust for the small-scale turbojets used on the iRonCub - an aerial humanoid robot. We use a grey-box method to capture the turbojet system dynamics with a nonlinear state-space model based on the data acquired from a custom engine test bench. This model is then used to design an extended Kalman filter that estimates the turbojet thrust only from the angular speed measurements. We exploited the parameter estimation algorithm to ensure that the EKF gives smooth and accurate estimates even at engine failures. The designed EKF was validated on the test bench where the mean absolute error in estimated thrust was found to be within 2% of rated peak thrust.
1 July 2026 in IEEE Robotics and Automation Letters