Four-dimensional (4D) bioprinting is an emerging biofabrication technology that integrates time as a fourth dimension with three-dimensional (3D) bioprinting for fabricating customizable tissue-engineered implants. 4D bioprinted implants are expected to possess self-healing and shape memory properties for new application opportunities, for instance, fabrication of devices with good shape integrity for minimally invasive surgery. Herein, we developed a self-healing hydrogel composed of biodegradable polyurethane (PU) nanoparticles and photo-/thermo-responsive gelatin-based biomaterials. The self-healing property of hydrogel may be associated with the formation of reversible ionomeric interaction between the COO − group of PU nanoparticles and NH 3+ group on the gelatin chains. The self-healing hydrogel demonstrated excellent 3D printability and filament resolution. The UV-crosslinked printed hydrogel showed good stackability (>80 layers), structural stability, elasticity, and tunable modulus (1−60 kPa). The shape-memorizable 4D printed constructs revealed good shape fixity (∼95%) and shape recovery (∼98%) through the elasticity as well as forming and collapsing of water lattice in the hydrogel. The hydrogel and the printing process supported the continuous proliferation of neural stem cells (NSCs) (∼3.7-fold after 14 days). Moreover, the individually bioprinted NSCs and mesenchymal stem cells in the adjacent, self-healed filaments showed mutual migration and such interaction promoted the cell differentiation behavior. The cryopreserved (−20 °C or −80 °C) 4D bioprinted hydrogel after awakening and shape recovery at 37 °C demonstrated cell proliferation similar to that of the non-cryopreserved control. This 4D bioprintable, self-healable hydrogel with shape memory and cryopreserving properties may be employed for customized biofabrication.
Directional strain sensing is essential for advanced sensor applications in the field of human‐machine interfaces and healthcare. Here, the angle dependent anisotropic strain sensitivity caused by charge carriers percolating through cross‐linked gold nanoparticle (GNP) networks is studied and these versatile materials are used for the fabrication of wearable triaxial pulse and gesture sensors. More specifically, the anisotropic response of 1,9‐nonanedithiol cross‐linked GNP films is separated into geometric and piezoresistive contributions by fitting the measured data with an analytic model. Hereby, piezoresistive coefficients of g11 ∼ 32 and g12 ∼ 21 are extracted, indicating a slightly anisotropic response behavior of the GNP‐based material. To use the material for healthcare applications, arrangements of three GNP transducers are patterned lithographically and fully embedded into a highly flexible silicone polymer (Dragon Skin 30). The new encapsulation method ensures good and robust electrical contacts and enables facile handling and protection from external influences. A facile read‐out with wireless data transmission using off‐the‐shelf electrical components underlines the great potential of these devices for applications as skin‐wearable healthcare sensors.
Wearable flexible strain sensors with spatial resolution enable the acquisition and analysis of complex actions for noninvasive personalized healthcare applications. To provide secure contact with skin and to avoid environmental pollution after usage, sensors with biocompatibility and biodegradability are highly desirable. Herein, wearable flexible strain sensors composed of crosslinked gold nanoparticle (GNP) thin films as the active conductive layer and transparent biodegradable polyurethane (PU) films as the flexible substrate are developed. The patterned GNP films (micrometer‐ to millimeter‐scale square and rectangle geometry, alphabetic characters, and wave and array patterns) are transferred onto the biodegradable PU film via a facile, clean, rapid and high‐precision contact printing method, without the need of a sacrificial polymer carrier or organic solvents. The GNP‐PU strain sensor with low Young's modulus (≈17.8 MPa) and high stretchability showed good stability and durability (10 000 cycles) as well as degradability (42% weight loss after 17 days at 74 °C in water). The GNP‐PU strain sensor arrays with spatiotemporal strain resolution are applied as wearable eco‐friendly electronics for monitoring subtle physiological signals (e.g., mapping of arterial lines and sensing pulse waveforms) and large‐strain actions (e.g., finger bending).
Self-healing properties, originating from the natural healing process, are highly desirable for the fitness-enhancing functionality of biomimetic materials. Herein, we fabricated the biomimetic recombinant spider silk by genetic engineering, in which Escherichia coli (E. coli) was employed as a heterologous expression host. The self-assembled recombinant spider silk hydrogel was obtained through the dialysis process (purity > 85%). The recombinant spider silk hydrogel with a storage modulus of ~250 Pa demonstrated autonomous self-healing and high strain-sensitive properties (critical strain ~50%) at 25 °C. The in situ small-angle X-ray scattering (in situ SAXS) analyses revealed that the self-healing mechanism was associated with the stick-slip behavior of the β-sheet nanocrystals (each of ~2–4 nm) based on the slope variation (i.e., ~−0.4 at 100%/200% strains, and ~−0.9 at 1% strain) of SAXS curves in the high q-range. The self-healing phenomenon may occur through the rupture and reformation of the reversible hydrogen bonding within the β-sheet nanocrystals. Furthermore, the recombinant spider silk as a dry coating material demonstrated self-healing under humidity as well as cell affinity. The electrical conductivity of the dry silk coating was ~0.4 mS/m. Neural stem cells (NSCs) proliferated on the coated surface and showed a 2.3-fold number expansion after 3 days of culture. The biomimetic self-healing recombinant spider silk gel and thinly coated surface may have good potential in biomedical applications.