Volume change of expansive soils is a challenging issue, which affects various engineering structures all over the world. Consequently, we need environmentally-friendly and cost-effective soil stabilizers to address the challenges related to expansive soils. The utilization of natural fibers allows for the reduction in environmental impact since they are renewable and biodegradable raw materials. Moreover, the current article presents an experimental approach to study the effect of natural fibers on the mechanical behavior of expansive soils. Various experimental tests—such as Atterberg limits, standard compaction, direct shear, swelling potential, and swelling pressure—were conducted on control and treated soil samples using different percentages of fibers. The results of measurements of the physico-mechanical properties after reinforcement of the soil with 1%, 5%, and 10% of natural fibers indicate that the mechanical behavior of expansive soils is greatly influenced by the addition of natural fibers. To conclude, 86% reduction was observed in the swelling coefficient of treated soil. Future research can be done to check the durability of the current practice in detail.

Several studies have explored the potential of waste marble powder (WMP) and lime (LM) as solutions for issues associated with clayey soils. While WMP enhances mechanical properties and addresses environmental concerns, LM effectively improves soil characteristics. This research investigates the efficacy of LM and WMP, both individually and in combination, in addressing challenges specific to clayey soils in Bouzaroura El Bouni, Algeria. These soils typically exhibit low load-bearing capacity, poor permeability, and erosion susceptibility. LM demonstrates promise in enhancing soil properties, while WMP not only addresses environmental concerns but also enhances mechanical characteristics, providing a dual benefit. The study utilizes a three-variable experiment employing Response Surface Methodology (RSM) Box-Behnken Design, with variations in clay content (88%–100%), LM treatment (1.5%–9%), and WMP inclusion (1.5%–9%). Statistical analysis, including ANOVA, reveals significant patterns with p-values <5%. Functional relationships between input variables (clay, LM, and WMP) and output variables (cohesion, friction angle, and unconfined compressive strength) are expressed through high determination coefficients (R² = 99.84%, 77.83%, and 96.78%, respectively). Numerical optimization identifies optimal mixtures with desirability close to one (0.899–0.908), indicating successful achievement of the objective with 88% clay content, 3% LM, and 6% WMP. This study provides valuable insights into optimizing clay soil behavior for environmental sustainability and engineering applications, emphasizing the potential of LM and WMP as strategic additives.

Blast damage to structural members poses serious risks to both buildings and people, making it important to understand how these elements behave under extreme loads. Columns in reinforced concrete (RC) structures are especially critical, as their sudden failure can trigger progressive collapse, unlike beams or slabs that have more redundancy. This state-of-the-art review brings together the current knowledge of the blast response of RC columns, focusing on their failure patterns, dynamic behavior, and key loading mechanisms. The studies covered include experiments, high-fidelity numerical simulations, emerging machine learning approaches, and analytical models for columns of different shapes (square, rectangular, circular) and strengthening methods, such as fiber reinforcement, steel-concrete composite confinement, and advanced retrofitting. Composite columns are also reviewed to compare their hybrid confinement and energy-absorption advantages over conventional RC members. Over forty specific studies on RC columns were analyzed, comparing the results based on geometry, reinforcement detailing, materials, and blast conditions. Both near-field and contact detonations were examined, along with factors like axial load, standoff distance, and confinement. This review shows that RC columns respond very differently to blasts depending on their shape and reinforcement. Square, rectangular, and circular sections fail in distinct ways. Use of ultra-high-performance concrete, steel fibers, steel-concrete composite, and fiber-reinforced polymer retrofits greatly improves peak and residual load capacity. Ultra-high-performance concrete can retain a significantly higher fraction of axial load (often >70%) after strong blasts, compared to ~40% in conventional high-strength RC under similar conditions. Larger sections, closer stirrups, higher transverse reinforcement, and good confinement reduce spalling, shear failure, and mid-height displacement. Fiber-reinforced polymer and steel-fiber wraps typically improve residual strength by 10–15%, while composite columns with steel cores remain stiff and absorb more energy post-blast. Advanced finite element simulations and machine learning models now predict displacements, damage, and residual capacity more accurately than older methods. However, gaps remain. Current design codes of practice simplify blast loads and often do not account for localized damage, near-field effects, complex boundary conditions, or pre-existing structural weaknesses. Further research is needed on cost-effective, durable, and practical retrofitting strategies using advanced materials. This review stands apart from conventional literature reviews by combining experimental results, numerical analysis, and data-driven insights. It offers a clear, quantitative, and comparative view of RC column behavior under blast loading, identifies key knowledge gaps, and points the way for future design improvements.

This article presents the results of a comparative experimental study on the influence of date palm fibers to replace polypropylene fibers used as reinforcement in self-compacting concrete (SCC). Indeed, the use of polypropylene fibers makes it possible to reduce the plastic shrinkage of concrete. Date palm fibers have mechanical characteristics (tensile strength and elasticity modulus) largely sufficient to replace polypropylene fibers. The use of natural fibers has several advantages, they are natural, renewable, have no affect the environment and require little energy for their transformation, unlike synthetic fibers. In this comparative study, polypropylene fiber is used as control material and date palm fiber as study material. The results obtained show that the two types of fibers decrease the fluidity and the compressive strength but increase the flexural strength and decrease the shrinkage. Date palm fibers delay the appearance of cracks more than polypropylene fibers. Date palm fibers guarantee the best results of SCCs in fresh and hardened state

This research focuses on the optimization of formulation, characterization, and damage analysis of plant fiber-reinforced polyester resin composites (jute and date palm). To better understand the characteristics and mechanical behavior of these materials, this study investigates the influence of resin content and plant fibers on the physico-mechanical behavior of the resin composites. Resinous composites consisting of polyester resin and raw earth were studied using a novel formulation based on an empirical method that follows the principle of earth saturation with polyester resin. Saturation was achieved with a 28% content of polyester resin, which appeared to be an optimal blend for the earth–resin composite. Plant fibers were randomly incorporated as reinforcement in the composites at various percentages (1%, 2%, and 3%) and lengths (0.5 cm, 1 cm, and 1.5 cm). Mechanical tests including bending, compression, and indentation were conducted to evaluate the mechanical properties of the composites. Analysis of fracture morphology revealed that the deformation and rupture mechanisms in bending, compression, and indentation of these composites differ from those of traditional concrete and cement mortar. The obtained results indicate that the composites exhibit acceptable performance and could be favorably employed in the rehabilitation of historic buildings.