This research focuses on the optimization of formulation, characterization, and damage analysis of plant fiber-reinforced polyester resin composites (jute and date palm). To better understand the characteristics and mechanical behavior of these materials, this study investigates the influence of resin content and plant fibers on the physico-mechanical behavior of the resin composites. Resinous composites consisting of polyester resin and raw earth were studied using a novel formulation based on an empirical method that follows the principle of earth saturation with polyester resin. Saturation was achieved with a 28% content of polyester resin, which appeared to be an optimal blend for the earth–resin composite. Plant fibers were randomly incorporated as reinforcement in the composites at various percentages (1%, 2%, and 3%) and lengths (0.5 cm, 1 cm, and 1.5 cm). Mechanical tests including bending, compression, and indentation were conducted to evaluate the mechanical properties of the composites. Analysis of fracture morphology revealed that the deformation and rupture mechanisms in bending, compression, and indentation of these composites differ from those of traditional concrete and cement mortar. The obtained results indicate that the composites exhibit acceptable performance and could be favorably employed in the rehabilitation of historic buildings.
14 June 2024 in Innovative Infrastructure Solutions
At ambient temperature, concrete exhibits excellent mechanical properties. However, understanding the behavior of concrete under high-temperature conditions is crucial, especially for civil engineering applications during fire incidents. The growing use of plastic-based products has led to a significant increase in polymer waste, posing environmental challenges. The valorization of this plastic waste in the form of fibers presents both economic and environmental advantages. This study focuses on the study of the behavior of sand concrete incorporating polyethylene terephthalate (PET) fibers with percentages of 1% and 2% at high temperatures (100, 300, 500 and 700 °C). Specimens are tested for residual mass loss, residual compressive and tensile strength. A complementary analysis of SEM makes it possible to confirm and better clarify the morphology of the concretes of sand before and after the rise in temperature. The results obtained from this study indicate that the residual resistance is reduced with the rise in temperature for all the concretes studied, except in the temperature range of 300 °C, in which a slight improvement in resistance is noticed. The incorporation of PET fibers in the test concretes does not enhance their residual behavior significantly. However, it does serve as an effective solution by reducing the susceptibility to spalling, by preventing cracking and by fulfilling a similar role to that of polypropylene fibers.
10 October 2025 in Innovative Infrastructure Solutions
The date palm filler has been used as reinforcing filler for Vinyl ester resin (VER) in order to obtain VER/ date palm materials biocomposites. Different loadings of date palm (1 to 5 phr – parts per hundred parts of resin) with a homogeneous particle size having an average diameter of 125µm were added to the VER. These biocomposites were produced by a contact molding process. The results of the investigation revealed that the increase in stress and strain at break with the increase in filler content. The increase in impact resistance up to a filler content of 2phr, for vinyl ester resin of date palm filler biocomposites. In addition, the density of date palm filler induced significant variations in the density of the resin and made it possible to develop biocomposites with densities close to that of the matrix because for the lower concentrations the DP filler are well dispersed into the resin, but entanglements are evidenced when the filler content increases .This study concluded that the date palm filler enhances the properties of composites, a good correlation was observed between the results of the mechanical tests and the physical analysis revealing that the biocomposite obtained has good mechanical strength and lightness.