In recent years, due to modern techniques for the distribution, transport, and retail sale of food, the production of large amounts of non-biodegradable and bioaccumulative packaging waste has become a major environmental issue. To address this issue, new food packaging materials based on renewable biomass have been studied as eco-friendly, biodegradable, and biocompatible alternatives to synthetic materials. However, although these materials are not petrochemical derivatives, the presence of contaminants cannot be excluded. This work aims to extend the knowledge on bio-based packaging materials, researching the presence of contaminants potentially able to migrate to food at concentrations of concern. In this study, we focus on two classes of contaminants, organophosphate esters (OPEs) and perfluoroalkyl substances (PFASs), carrying out migration tests toward different simulants, according to the current European regulation. PFAS analysis was performed using high-resolution liquid chromatography coupled to ion trap-tandem mass spectrometry (QTrap). OPE analyses were performed both by gas chromatography–mass spectrometry (GC-MS) and high-resolution liquid chromatography coupled to triple quadrupole mass spectrometry (TQMS). Preliminary findings demonstrate the release of toxic OPEs and PFASs from bio-based food packaging, highlighting the need to investigate the presence of potentially harmful chemicals in these materials.
PFASs are a variety of ecologically persistent compounds of anthropogenic origin loosely included in many industrial products. In these, the carbon chain can be fully (perfluoroalkyl substances) or partially (polyfluoroalkyl substances) fluorinated. Their ubiquitous presence in many environmental compartments over the years and their long-lasting nature have given rise to concerns about the possible adverse effects of PFASs on ecosystems and human health. Among a number of remediation technologies, adsorption has been demonstrated to be a manageable and cost-effective method for the removal of PFASs in aqueous media. This study tested two novel and eco-friendly adsorbents (pinewood and date seeds biochar) on six different PFASs (PFOS, GenX, PFHxA, PFOA, PFDA, and PFTeDA). Batch sorption tests (24 h) were carried out to evaluate the removal efficiency of each PFAS substance in relation to the two biochars. All samples of liquid phase were analyzed by a developed and then a well-established method: (i) pre-treatment (centrifugation and filtration) and (ii) determination by high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS). The results evidenced a comparable adsorption capacity in both materials but greater in the long-chain PFASs. Such findings may lead to a promising path towards the use of waste-origin materials in the PFAS remediation field.
The present paper investigates the adsorption performance of pinewood-derived biochars produced at two pyrolysis temperatures (850 °C, PW-A; 1000 °C, PW-B), including sieved fractions (PW-A1 and PW-A2) and a functionalized variant (PW-C), for the removal of five short- and intermediate-chain PFASs (PFBA, PFBS, PFHxA, PFHxS, and GenX) from water under continuous-flow conditions. Adsorption behavior was evaluated using Freundlich and Hill isotherm models. The Hill model provided a superior fit for most PFAS–adsorbent systems, highlighting the importance of cooperativity effects, particularly for short-chain PFASs. In single-compound experiments, PFBS and GenX showed the highest adsorption capacities (up to 82.3 and 68.5 mg g−1), while PFBA and PFHxA exhibited the lowest. Among the tested materials, biochar produced at 1000 °C (PW-B) consistently demonstrated the highest adsorption efficiency. Compared to activated carbon, PW-B showed comparable performance for PFBA, PFBS, PFHxA and PFHxS and significantly better performance for GenX. In mixed-PFAS systems, competitive effects reduced adsorption capacity and cooperativity. Sulfonic PFASs showed higher affinity than carboxylic PFASs, following the trend PFHxS > PFBS > PFHxA > PFBA. Overall, the results demonstrate that waste-derived biochar represents a low-cost and sustainable alternative for PFAS removal in realistic water-treatment scenarios, supporting scalable solutions aligned with global environmental goals.
PFAS are a variety of ecologically persistent compounds of anthropogenic origin loosely included in many industrial products, in which the carbon chain can be fully (perfluoroalkyl substances) or partially (polyfluoroalkyl substances) fluorinated. Their ubiquitous presence in many environmental compartments over the years, and highly long-lasting nature, arose concern because of the possible adverse effects of PFAS on ecosystem and human health. Between the remediation technologies, adsorption has been demonstrated to be a maneageble and cost-effective method for the removal of PFAS in aqueous media. This study tested two novel and eco-friendly adsorbents (pinewood and date seeds biochar) on 6 different PFAS (PFOS, GenX, PFHxA, PFOA, PFDA, PFTeDA). Batch sorption tests (24 hours) were carried out to evaluate the removal efficiency of each PFAS substance in relation to the two biochars. All samples of liquid phase were analysed by a developed and then well-established method: i) pre-treatment (centrifugation and filtration); ii) determination by high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS). Results evidenced a comparable adsorption capacity of both materials, but greater for the long-chain PFAS. Such findings may lead to a promising path for the use of waste origin materials in the PFAS remediation field.