Crack assessment is an essential process in the maintenance of concrete structures. In general, concrete cracks are inspected by manual visual observation of the surface, which is intrinsically subjective as it depends on the experience of inspectors. Further, it is time-consuming, expensive, and often unsafe when inaccessible structural members are to be assessed. Unmanned aerial vehicle (UAV) technologies combined with digital image processing have recently been applied to crack assessment to overcome the drawbacks of manual visual inspection. However, identification of crack information in terms of width and length has not been fully explored in the UAV-based applications, because of the absence of distance measurement and tailored image processing. This paper presents a crack identification strategy that combines hybrid image processing with UAV technology. Equipped with a camera, an ultrasonic displacement sensor, and a WiFi module, the system provides the image of cracks and the associated working distance from a target structure on demand. The obtained information is subsequently processed by hybrid image binarization to estimate the crack width accurately while minimizing the loss of the crack length information. The proposed system has shown to successfully measure cracks thicker than 0.1 mm with the maximum length estimation error of 7.3%.

The displacement responses of a civil engineering structure can provide important information regarding structural behaviors that help in assessing safety and serviceability. A displacement measurement using conventional devices, such as the linear variable differential transformer (LVDT), is challenging owing to issues related to inconvenient sensor installation that often requires additional temporary structures. A promising alternative is offered by computer vision, which typically provides a low-cost and non-contact displacement measurement that converts the movement of an object, mostly an attached marker, in the captured images into structural displacement. However, there is limited research on addressing light-induced measurement error caused by the inevitable sunlight in field-testing conditions. This study presents a computer vision-based displacement measurement approach tailored to a field-testing environment with enhanced robustness to strong sunlight. An image-processing algorithm with an adaptive region-of-interest (ROI) is proposed to reliably determine a marker’s location even when the marker is indistinct due to unfavorable light. The performance of the proposed system is experimentally validated in both laboratory-scale and field experiments.

Vertical deflection has been emphasized as an important safety indicator in the management of railway bridges. Therefore, various standards and studies have suggested physics-based models for predicting the time-dependent deflection of railway bridges. However, these approaches may be limited by model errors caused by uncertainties in various factors, such as material properties, creep coefficient, and temperature. This study proposes a new Bayesian method that employs both a finite element model and actual measurement data. To overcome the limitations of an imperfect finite element model and a shortage of data, Gaussian process regression is introduced and modified to consider both, the finite element analysis results and actual measurement data. In addition, the probabilistic prediction model can be updated whenever additional measurement data is available. In this manner, a probabilistic prediction model, that is customized to a target bridge, can be obtained. The proposed method is applied to a pre-stressed concrete railway bridge in the construction stage in the Republic of Korea, as an example of a bridge for which accurate time-dependent deflection is difficult to predict, and measurement data are insufficient. Probabilistic prediction models are successfully derived by applying the proposed method, and the corresponding prediction results agree with the actual measurements, even though the bridge experienced large downward deflections during the construction stage. In addition, the practical uses of the prediction models are discussed.