There is a growing demand for biobased functional materials that can ensure targeted pesticide delivery and minimize active ingredient loss in the agricultural sector. In this work, we demonstrated the use of esterified lignin nanoparticles (ELNPs) as carriers and controlled-release agents of hydrophobic compounds. Curcumin was selected as a hydrophobic model compound and was incorporated during ELNP fabrication with entrapment efficiencies exceeding 95%. ELNPs presented a sustained release of curcumin over 60 days in an oil medium, with a tunable release rate dependent on the lignin-to-curcumin mass ratio. The ELNPs showed a strong adhesion interaction with the hydrophobic wax surface. Quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM) analysis suggested that the ELNPs permeated into the wax layer, potentially preventing pesticide loss due to runoff or rainwater leaching. Rapidly decreasing contact angles between a droplet containing an aqueous dispersion of the ELNPs and a fresh leaf surface provided further evidence of a favorable interaction between the two. Overall, our results portray ELNPs as promising biobased nanoparticulate systems for pesticide delivery to hydrophobic plant surfaces.
Optically responsive materials are present in everyday life, from screens to sensors. However, fabricating large-area, fossil-free materials for functional biocompatible applications is still a challenge today. Nanocelluloses from various sources, such as wood, can provide biocompatibility and are emerging candidates for templating organic optoelectronics. Silver (Ag) in its nanoscale form shows excellent optical properties. Herein, we combine both materials using thin-film large-area spray-coating to study the fabrication of optical response applications. We characterize the Ag nanoparticle formation by X-ray scattering and UV–vis spectroscopy in situ during growth on the nanocellulose template. The morphology and optical properties of the nanocellulose film are compared to the rigid reference surface SiO2. Our results clearly show the potential to tailor the energy band gap of the resulting hybrid material.
23 December 2024 in ACS Applied Materials & Interfaces
The full exploitation of the outstanding mechanical properties of cellulose nanofibrils (CNFs) as potential reinforcements in nanocomposite materials is limited by the poor interactions at the CNF-polymer matrix interface. Within this work, tailor-made copolymers were designed to mediate the interface between CNFs and biodegradable poly(butylene adipate-co-terephthalate) (PBAT), and their effect on extruded nanocomposite performance was tested. For this purpose, two well-defined amphiphilic anchor-tail diblock copolymer structures were compared, with a fixed anchor block length and a large difference in the hydrophobic tail block length. The aim was to evaluate the impact of the copolymers' chain length on the nanocomposite interface. The presence of amphiphilic diblock copolymers significantly improved the mechanical properties compared to those of PBAT nanocomposites containing unmodified CNFs. In particular, the copolymer with a longer tail was more effective for CNF-PBAT dispersion interactions, leading to a 65% increase of Young's modulus of neat PBAT, while retaining high deformability (670%). The results provide insights into the effectiveness of a waterborne third component at the CNF-matrix interface and its structure-property relationship.
The polymerization of a bio-based terpene-derived monomer, sobrerol methacrylate (SobMA), was evaluated in the design of polymeric nanoparticles (nanolatexes). Their synthesis was accomplished by using emulsion polymerization, either by free-radical polymerization in the presence of a cationic surfactant or a cationic macroRAFT agent by employing RAFT-mediated polymerization-induced self-assembly (PISA). By tuning the length of the hydrophobic polymer, it was possible to control the nanoparticle size between 70 and 110 nm. The average size of the latexes in both wet and dry state were investigated by microscopy imaging and dynamic light scattering (DLS). Additionally, SobMA was successfully copolymerized with butyl methacrylate (BMA) targeting soft-core nanolatexes. The comparison of the kinetic profile of the cationically stabilized nanolatexes highlighted the differences of both processes. The SobMA-based nanolatexes yielded high Tg ∼ 120 °C, while the copolymer sample exhibited a lower Tg ∼ 50 °C, as assessed by Differential Scanning Calorimetry (DSC). Thereafter, the nanolatexes were adsorbed onto cellulose (filter paper), where they were annealed at elevated temperatures to result in polymeric coatings. Their morphologies were analysed by Field Emission Scanning Electron Microscopy (FE-SEM) and compared to a commercial sulfate polystyrene latex (PS latex). By microscopic investigation the film formation mechanism could be unravelled. Water contact angle (CA) measurements verified the transition from a hydrophilic to a hydrophobic surface after film formation had occured. The obtained results are promising for the toolbox of bio–based building blocks, focused on sobrerol-based monomers, to be used in emulsion polymerizations either for tailored PISA–latexes or facile conventional latex formation, in order to replace methyl methacrylate or other high Tg-monomers.
To address the increasing demand for biobased materials, lignin-derived ferulic acid (FA) is a promising candidate. In this study, an FA-derived styrene-like monomer, referred to as 2-methoxy-4-vinylphenol (MVP), was used as the platform to prepare functional monomers for radical polymerizations. Hydrophobic biobased monomers derived from MVP were polymerized via solution and emulsion polymerization resulting in homo- and copolymers with a wide range of thermal properties, thus showcasing their potential in thermoplastic applications. Moreover, divinylbenzene (DVB)-like monomers were prepared from MVP by varying the aliphatic chain length between the MVP units. These biobased monomers were thermally crosslinked with thiol-bearing reagents to produce thermosets with different crosslinking densities in order to demonstrate their thermosetting applications. The results of this study expand the scope of MVP-derived monomers that can be used in free-radical polymerizations toward the preparation of new biobased and functional materials from lignin.