This work concerns the elimination of the organic pollutant; the Bemacid Red (BR) a rather persistent dye; present in wastewater from the textile industry, in western Algeria, by adsorption on carbon from an agricultural waste in the optimal conditions of the adsorption process. An active carbon was synthesized by treating an agro-alimentary waste, the date stones that are very abundant in Algeria, physically and chemically. Sample after activation (SAA) with phosphoric acid was highly efficient for the removal of BR. The characterization of this porous material has shown a specific surface area that exceeds 900 m²/g with the presence of mesopores. The iodine value also indicates that the activated carbon obtained has a large micro porosity. The reduction of the infrared spectroscopy (FTIR) bands reveals that the waste has been synthesized and activated in good conditions. Parameters influencing the adsorption process have been studied and optimized such as: contact time, adsorbent mass, solution pH, initial dye concentration and temperature. The results show that for a contact time of 60 min, a mass of 0.5 g and at room temperature, the adsorption rate of the BR by the SAA is at its maximum. Pseudo- first-order, pseudo-second-order and intraparticle diffusion models were studied to analyse adsorption kinetics. The result shows the adsorption kinetic is the best with pseudo-second-order model. In this study, Langmuir, Freundlich and Temkin isotherms were in vestigated for adsorption of BR onto SAA. The Freundlich and Temkin isotherms have the highest correlations coefficients. The suggested adsorption process involves multilayer adsorption with the creation of chemical bonds. The mechanism of adsorption of BR by SAA is spontaneous and exothermic, and the Gibb's free energy values confirm that the elimination of the textile dye follows a physisorption.

This work is about organic matter removal from Sidi Bel Abbes wastewater plant (Algeria) by coagulation on pillared clays (PILCs) under pH and PZC (point of zero charge), conditions. Two pillared clays, M/Al-PILCs (M = Fe or Mn), were synthesized, characterized, and studied as coagulants. Results showed that Fe/Al-pillared clay exhibits superior efficiency, with 18% higher removal rate than the common coagulants alum (AS) and ferric chloride (FCl), and that sedimentation time has positive effect on turbidity removal, with 95.85% removal rate during 30 min. Moreover PILCs will not cause pH go down too low, which is an advantage for achieving the best overall treatment. The IR and UV bands' reduction reveals the breakdown fragmentation of high molecular weight organic substances into smaller units. The highest total organic carbon (supercritical water oxidation analysis) and chemical oxygen demand adsorption capacities (48.52% and 61.85% respectively) obtained for Fe/Al-PILC can be related to increased basal spacing between adjacent layers, creating favorable adsorption sites in the microporous system. The suggested adsorption mechanism involves strong interactions between pollutants and PILCs leading to PILC–pollutant complex formation.