The flame behavior of engine fires, such as those caused by leaked fuel coming into contact with an ignition source, is significant in practical applications, where flame detection is used to minimize the damage of the attendant ship fire safety problem. In this work, the flame behavior of hot-surface ignition (HSI) under crossflow was studied, with a particular focus on the difference in lateral airflow velocities for HSI-driven flame deviations at the windward and leeward sides of a ship engine room; a problem such as this has not previously been quantified. Full-scale experiments were conducted in a ship engine room using marine diesel and hydraulic oil as the fuel, and by adopting lateral airflow with the velocities of 0 m/s, 1.0 m/s, 3.0 m/s, and 5.0 m/s, together with an HSI mechanism consisting of marine diesel and hydraulic oil coming into contact with elevated hot-surface temperatures. The results show that the effects of disturbing the combustible gaseous mixture for marine fuel HSI, at both the windward and leeward sides, strengthened as the airflow velocity increased. The HSI position of the leaked marine fuel in the engine room was strongly dependent on ventilation, while that under the airflow condition decreased with the increase in the hot-surface temperature. A model was proposed to characterize this difference on the basis of the HSI height, which was defined as the ratio of the height during the initial HSI to the stationary period. The results indicate that the scale of the flame gradually increased in the horizontal direction, which was significantly different from the result in the scenario without mechanical ventilation. The results also revealed that the fluctuation of hydraulic oil through the temperature field was significant and lasted for a long time under a low HSI temperature.

The involvement of liquefied petroleum gas (LPG), which is highly combustible and explosive, greatly increases risk in road transport. A 3D numerical model was conducted in FLACS, which depicts the dynamic process and variation of combined effects along the multi-directions of LPG explosion under an actual case. With the simulation of scenarios, power-law explosion and fireball models were used to reproduce the results, and the dynamic evolution of specific parameters during the LPG explosion process was analyzed. The results reveal that the LPG explosion’s expansion around the expressway moved along the spaces between obstacles, while conditions at the site of the accident had an enhancement effect on LPG/air mixture accumulation. The propagation trajectory of the shock wave in the horizontal direction presented a regular circle within 623.73 ms, and the overpressure was enough to lead to extensive damage to surrounding structures. Further, shock wave-driven overpressure brought hazards to buildings further afield with multiple peak values. The influence of the LPG explosive fireball evolution is significantly reflected in the injury range of the heat flux; the maximum diameter of the on-site fireball eventually extended to 148.19 m. In addition, the physical effect indicated that the turbulence intensity induced by the surrounding buildings in the accident site significantly promoted the interaction between the shock wave and flame propagation. This research proposes a detailed analysis of damage coupling characteristics caused by an LPG tank trailer explosion integrated with a FLACS-mirrored model, which are useful for blast-resistant design and disposal planning under similar accidental circumstances.

To extend initial ignition-related fire prevention in ship engine room, this work presents a case study of marine diesel leakage for identifying accidental ignition by hot surface. Based on a self-designed experimental platform, a full-scale innovative experimental arrangement was conducted for diesel leakage-related hot surface ignition (HSI) tests in a ship engine room. A series of parameters (e.g., heat transfer, evaporation mode, ignition position, ignition delay time, flame instability, and combustion behavior) for improving the initial HSI of diesel leakage on an edge-limited hot surface were analyzed. A transient sequence corresponding to a change in leakage flow rates ranging from 7.5 mL to 25 mL was tested, and hot surface temperatures (HSTs) were adjusted between 390 °C to 525 °C. Puffing motion accelerated the mixing of HSI-driven vapors with fresh air, which was affected by the edge-based limitation and HSTs. The case study identified the effects of hot surface shape and the most important combinations of HSI-driven combustion characteristics for estimating initial ignition responses. Based on this current work, prediction models were proposed for determining the HSI height of marine diesel for varying leakage flow rates and HSTs. The results indicate that HSI height increases with leakage flow rate and HSI position is influenced by edged hot surfaces, leading the vertical centerline to shift towards the side of the edge structure. The results also revealed that the ignition delay time of diesel leaked onto an edged hot surface decreases as leakage flow rate increases. This change causes the initial HSI to occur earlier, potentially creating an extra risk in ship engine rooms.

The hazard of highly combustible marine oil leakage greatly increases fishing vessel operation risks. This research integrates an experiment to explore the coupling mechanism of a typical heated surface of an engine room as a source to ignite marine oil. A numerical model is established that depicts the dynamic process of and variations in the combined effects regarding multiple factors of oil ignition under actual experiment. The leaked marine oil is ignited with a heated surface, relevant models are applied to reproduce the results, and the influences of specific parameters of a fishing vessel’s engine room are analyzed. The results indicate that the leaked oil boils violently on the heated surface, and a vapor film forms on the oil surface. Increased heated-surface temperatures lead to a significant difference in the initial ignition occurrences of marine oil, and the distance between the ignition height and oil is closely related to the engine room environment. The ignition probability of marine oil shows a gradually increasing trend with elevated heated-surface temperatures. The ignition height presents a downward trend with the increase in the heated-surface temperature, while the engine room’s humidity in air inhibits the upward transfer of heat; however, the degree of inhibition is limited accordingly. The results evidence that this comparative work can be an effective approach to reveal the impacts of marine oil, heat source, ventilation velocity, and humidity on initial ignition characteristics. Additionally, this work provides a basis for setting up emergency planning with appropriate monitoring equipment and further preventing vessel fires due to oil–thermal ignition.

Recently, many floating renewable energy platforms have been deployed in coastal regions, where sloping bottoms are an important factor when evaluating their safety. In this article, a simplified method coupling an eigenfunction matching method (EMM) and a finite-depth Green’s function (FDGF) is developed to evaluate floating-body motion responses over a sloping bottom for which bathymetry is homogeneous in the longshore direction. We propose an extended EMM to create an incident wave model over the sloping bottom, thereby obtaining the Froude–Krylov (F–K) force and Neumann data on the wet surfaces of the floating body for the diffraction problem. An equivalent depth is introduced to account for the interaction between the sloping bottom and floating bodies when dealing with the diffraction and radiation problems. The accuracy of the present method is validated through a comprehensive comparison with numerical and/or experiment results for a liquefied natural gas (LNG) ship and a floating hemisphere from the literature. Generally, the present, simplified method can give predictions with sufficient accuracy.