In this article, heterogeneous complementary field-effect-transistor (CFET) constructed by vertically stacking amorphous indium gallium zinc oxide (a-IGZO) n-channel on poly-Si p-channel with their own dielectric layer and work function metal gate inverters were demonstrated. Meanwhile, high-frequency IGZO radio frequency (RF) devices with poly-Si as guard ring material simultaneously were fabricated in the same process. High ${f}_{\text {T}}$ and ${f}_{\text {max}}$ IGZO Radio Frequency Integrated Circuits (RFICs) with the excellent on–off ratio need to be promoted by introducing fluorine-based gas. For the IGZO device in CFET, its threshold voltage can be tuned by the adjusted gate for ideal inverter operation at different supply voltage ( ${V}_{\text {DD}}$ ). Moreover, the swing of the IGZO transistor and the gain extracted from voltage transfer characteristic (VTC) curves can also be improved when the controlled gate and adjusted gate are connected as an input terminal, but the ${V}_{\text {TH}}$ tunability for the inverter is satisfied in the meantime. We also simulated 6T-SRAM circuit by SPICE model to further investigate the potential of an adjusted gate for optimizing the noise margin during SRAM operation.
13 April 2020 in IEEE Transactions on Device and Materials Reliability
The charge trapping effects on AlGaN/GaN HEMTs under UV illumination are investigated using the pulsed current-voltage (I-V) measurement method. The test samples are unpassivated Schottky-gate HEMTs and metal-insulator-semiconductor HEMTs (MIS-HEMTs) with SiN gate dielectric. For HEMTs, the dominant charge trapping sources are the surface trap states, whereas, for MIS-HEMTs, they are trap states in the SiN gate dielectric and GaN buffer. When these devices are shined with the UV light, the drain current increases apparently in both samples owing to the generated photocurrent. By combining the UV illumination and pulsed I-V measurement, we find out the UV light has less effect on the surface charge trapping in the unpassivated HEMTs. Moreover, in MIS-HEMTs, we observe the charge trapping in the SiN gate dielectric becomes more serious under UV illumination, whereas the charge trapping in the GaN buffer is suppressed significantly. These findings are important for designing a GaN-based HEMT for photonic applications. In addition, the different responses of the surface-, buffer-, and gate-dielectric-related charge trapping to the UV light suggest that it would be easier to distinguish the trap types by introducing the UV illumination during the pulse measurement.
24 August 2018 in IEEE Transactions on Electron Devices
Analog and RF characteristics of power FinFET transistors with different drain-extension structures are investigated for microwave integrated circuit applications. The power FinFETs were designed based on the drain-extended MOSFET structure and fabricated using a standard low-voltage FinFET process. Three various drain-extension configurations are demonstrated and compared. With the low-doped drain extension, the breakdown voltage of power FinFETs is higher than 6.5 V for all samples. For standard power devices, where the drain extension is performed with narrow fins, a high drain resistance is inevitable, resulting in high on-resistance and poor analog and RF performances. For devices with wide drain-extension fins (wide drain FinFET) or a planar drain extension (hybrid FinFET), lower drain resistances are obtained owing to the larger extension width. Therefore, the on-resistances of the wide drain and hybrid devices are much lower than that of the standard counterpart. Moreover, these devices with modified drain extensions also exhibit better analog and RF behaviors. The cutoff frequency of power FinFETs is boosted from 30 to 53 GHz when the drain extension is changed from narrow fins to a planar layout. These experimental results indicate that RF power FinFETs with good performance would be realized with the modified drain-extension designs.
22 November 2023 in IEEE Microwave and Wireless Technology Letters
This letter presents the design of a W -band low-noise amplifier (LNA) using a four-stage common-source (CS) architecture fabricated in a 90-nm CMOS process. The LNA employs source degeneration with a transmission line to achieve a minimum noise figure (NF) of 5.0 dB and flat gain of 16.9 $\pm$ 1.5 dB from 76.5 to 87.5 GHz for a 3-dB bandwidth of 11 GHz. The circuit consumes only 14 mW of dc power when biased at a 1 V power supply.
14 May 2020 in IEEE Transactions on Nanotechnology
The low-frequency noise characteristics of AlGaN/GaN HEMTs and MIS-HEMTs are investigated in the dark condition and under UV illumination. The test devices with a 3-μm-thick GaN buffer and a 25-nm-thick Al0.22Ga0.78N barrier layer were fabricated on the silicon wafer. For MIS-HEMTs, a 25-nm-thick SiN layer was deposited as a gate dielectric. The measured low-frequency noises show a 1/f spectrum and can be described by the carrier number fluctuation model. Different noise responses to the UV light between HEMTs and MIS-HEMTs were observed. By comparing the noise data in dark and under UV illumination, the noise sources under the gate and in the ungated gate-drain access region have been identified. From these results, we can find a design guideline to improve the noise and reliability of GaN-based devices for optoelectronic applications.
A unique approach for fabricating poly-Si thin-film transistors (TFTs) with self-aligned T-shaped gate (T-gate) structure is reported. A counter-doped poly-Si process comprises an in-situ doped n+ poly-Si deposition followed by a subsequent shallow implantation of BF2 +. Both high etching isotropy in n+ poly-Si and high etching selectivity between n+ poly-Si and B-doped poly-Si in a Cl2-based plasma process are the key enablers for the fabrication of our T-gate structures. Thanks to good control in the shape and deformation of our T-gate structure, sidewall air-gap spacers in combination with self-aligned Ni silicided gate and source/drain were established. High-performance sub-micron poly-Si TFTs are evidenced by superior transfer characteristics measured on TFTs with effective gate length of 0.15μm. The unique T-gate structure provides an effective way for possible production of poly-Si radio-frequency TFTs viable for emerging new applications.