Recent advances in materials science have led to the development of smart materials that can continuously adapt to different loading conditions and changing environment to meet the growing demand for smart structural systems. The unique characteristics of superelastic NiTi shape memory alloys (SMAs) have attracted the attention of structural engineers worldwide. SMAs are metallic materials that can retrieve their original shape upon exposure to various temperatures or loading/unloading conditions with minimal residual deformation. SMAs have found increasing applications in the building industry because of their high strength, high actuation and damping capacities, good durability, and superior fatigue resistance. Despite the research conducted on the structural applications of SMAs during the previous decades, the existing literature lacks reviews on their recent uses in building industry such as prestressing concrete beams, seismic strengthening of footing–column connections, and fiber-reinforced concrete. Furthermore, scarce research exists on their performance under corrosive environments, elevated temperatures, and intensive fires. Moreover, the high manufacturing cost of SMA and the lack of knowledge transfer from research to practice are the main obstacles behind their limited use in concrete structures. This paper sheds light on the latest progress made in the applications of SMA in reinforced concrete structures during the last two decades. In addition, the paper concludes with the recommendations and future opportunities associated with expanding the use of SMA in civil infrastructures.

Laboratory tests were performed for evaluating the flexural performance of Portland cement mortars reinforced with recycled fibers. The objective was to find the best blend of unsorted recycled post-consumer tire steel fibers (RTSF), and recycled plastic fibers (RPF) for enhancing the flexural behavior and ductility of cement-based composites. Ten mortar mixes containing various blends of RTSF and RPF were cast and tested under a displacement-controlled four-point bending ASTM test. Test results indicate that the mortar mixes reinforced with recycled fibers satisfied the ASTM flow requirements and achieved a flexural response and toughness comparable to the response of similar mixes, containing manufactured steel fibers (MSF) only, at the same fiber dosage. Among the recycled fiber blends investigated, the mix containing 0.5% RTSF and 0.5% RPF (on volume basis) exhibited relatively superior flexural characteristics compared to the mixes reinforced with the same dosage of MSF only. Moreover, the positive synergetic effect of fiber blends on the post-cracking strength and flexural toughness was pronounced at 0.5% RTSF and 0.5% RPF (on volume basis). Hence, as an echo-friendly material, recycled fiber blends of RTSF and RPF could be recommended for enhancing the flexural performance of cement-based composites at a lesser cost.

Upgraded design standards coupled with the damage caused by natural disasters have led to the development of smart materials with the potential to modernize current construction practices. This investigation proposes a nonlinear finite element (FE) model for evaluating the performance of beam–column joints (RC-BCJ) reinforced with shape memory alloys (SMA) and steel rebars. The model was validated based on accredited experimental data, followed by parametric analysis in ABAQUS to optimize the use of SMA bars for enhancing the seismic resistance of RC-BCJ without compromising their energy dissipation capacity. Parameters investigated include the (a) SMA–steel reinforcement ratio, (b) lengths of SMA bars, (c) elastic modulus of SMA, (d) compressive strength of concrete, and (e) axial load applied on the column. The finite element simulation results indicated that the model was capable of predicting the optimum length of SMA bars sufficient for relocating the plastic hinge away from the face of the column along the beam. Further, simulation results proved that the use of SMA bars in conjunction with steel reinforcement could be considered as an effective tool for enhancing the seismic performance of RC-BCJ joints. Among the parameters investigated, high-strength concrete was the most effective in improving joint resistance.

Residual drifts are an important measure of post-earthquake functionality in bridges and buildings, and can determine whether the structure remains fit for its intended purpose or not. This study aims at investigating numerically, through finite element (FE) analysis in ABAQUS, the cyclic response of exterior steel I beam-hollow column connection using welded shape memory alloys (SMA) bolts and seat angles. This is followed by validating the numerical model using an accredited experimental data available in the literature through different techniques, (1) SMA bolts, (2) SMA angles, (3) SMA bolts and angles. The parameters investigated included: SMA type, SMA angle thickness, SMA bolt diameter, SMA angle stiffener and SMA angle direction. The cyclic performance of the steel connection was enhanced further by varying the bolt diameter, plate thickness, angle type and direction. The results revealed that the connections equipped with a combination of SMA plates and SMA angles reduced the residual drift by up to 94%, and doubled the self-centering capability compared to conventional steel connections. Moreover, the parametric analysis showed that Fe-based SMA members could be a good alternative to NiTi based SMA members for improving the self-centering capability and reducing the residual drifts of conventional steel connections.