This paper presents the results of experimental investigation which was carried out to evaluate the effect of bacteria on the compressive strength, porosity of M-sand concrete. The river sand was replaced by M-sand and M20 and M30grade pumpable concreteswere designed for investigation purpose. The w/c ratio of the concrete was selected as 0.45 and 0.4 respectively. Bacillus subtilis bacteria was included at a concentration of 30x105 cells/mL of water. The compressive strength, water absorption and porosity of concrete were determined after the curing periodof 3, 7, 28 and 90 days. Results were indicated that the substitution of M-sand instead of river sand was reduced the compressive strength up to 20% when compared with river sand based control concrete. The porosity and water absorptionbehaviour of M-sand concrete were observed in higher order than that of control concrete. On the addition of bacteria, 37%-45% reduction in water absorption and porosity level of bacterial M-sand concrete was achieveddue to the self-healing of micro crack in the concrete.
1 December 2020 in IOP Conference Series: Materials Science and Engineering
India is the third largest coconut cultivating country in the world. South India states are the predominant coconut cultivating area in India. Coconut shell (CS) and coconut shell ash (CSA) are unavoidable by-products from agricultural industry. As a part of solid waste management, the investigation was carried out to evaluate the effect of replacing cement by CSA and coarse aggregate by CS. The replacement level was considered as 5%, 10%, 15%, 20%, 25% and 30% in both cement and coarse aggregate by CSA and CS respectively. Normal strength concrete was considered in this investigation. The density and mechanical properties of concrete such as 28 days cured compressive strength and flexural strength were determined. Using 3D graphical analysis, the optimum replacement of cement and coarse aggregate was predicated in this investigation.
1 December 2020 in IOP Conference Series: Materials Science and Engineering
The black cotton soilis the kind of soils whose size of size modifications together with the variation in moisture content material. They will have a conduct of expanding and contracting that is a severevulnerability to constructed building above them. The swelling behaviour of clay soil is existing in north Karnataka region. Thestudy demonstrates the results of an effortto strengthen and stabilize the clay soil with waste synthetic strips. The synthetic pieces being kept readyand integrated at three diverse blending proportions (0.5%, 1% and 1.5%) by mass of soil with various aspect ratios (8*8mm, 8*16mm, and8*24mm). The exploratory results demonstrated that there was obviously a development in the shear quality factors. The expanding and drying upwards conduct behaviour are additionally sensitively reduced. There was a reduction that is substantial the OMC and insignificant improvement in MDD. The maximum size of plastic (aspect ratio) and synthetic content that results in maximum outcome may be chosen based on the value for the selection parameter for a definite engineering work. Stabilizing black cotton soils with unwanted plastic containers at the same time solves the tasks of unsuitable plastic waste reutilizing that is presently a teething issue in many countries that are developing. The outcomes obtained from this investigation positively suggest that addition of this product in clay soils would succeed for ground enhancement in geotechnical engineering.
1 December 2020 in IOP Conference Series: Materials Science and Engineering
Geopolymer is the new generation civil engineering material and it is replacing the conventional cement in constructional activities. Sodium silicate (Na2SiO3) and sodium hydroxide (NaOH) solutions were used as alkaline activators to develop the geopolymer mortar in this investigation. The effect of the ratio of Na2SiO3/ NaOH (SS/SH) in the activator solution on the fresh and hardened mortar strength were studied and reported in this paper. Thermal curing was followed in most of the previous research findings and it has various limitations for cast-in-situ applications. Further, the ambient temperature curing method was considered in this study to overcome the limitations and the results were compared and presented. The control geopolymer mortar was developed with class F type fly-ash (FA). Ground granulated blast furnace slag (GGBS) and corn cob ash (CCA) were substituted as FA replacing basic materials. The experimental results had shown that the addition of GGBS and CCA reduced the flow value and setting time of fresh geopolymer mortar and increasing the compressive strength of geopolymer mortar. The experimental outcomes showed that the compressive strength of geopolymer mortar was increased due to increasing the ratio SS/SH. While considering ambient curing environment instead of thermal curing, the strength development pattern was modified and compressive strength was decreased in all the rest period.
This research investigates the effectiveness of textile-reinforced mortar (TRM) systems for enhancing the load-carrying capacity of reinforced concrete columns (RCCs) with high aspect ratio. This study focuses on the use of the TRM systems as an alternative to fiber-reinforced polymer (FRP) systems, addressing challenges such as high cost, poor performance at high temperatures, incompatibility with substrate materials, and inability to be applied to damp surfaces. It includes a detailed analysis of the TRM systems’ effectiveness through an experimental evaluation, with a particular focus on RCCs having high aspect ratio. The obtained results reveal a significant strength improvement, ranging from 50% to 129%, for RCCs with the aspect ratios decreasing from three to two, with the workmanship contributing to the observed strength enhancement. Achieving a consistent and uniform distribution of the mortar layer, seamlessly aligned with the column surfaces, proves crucial. The study also highlights the importance of the mortar layer thickness, particularly in cases of the reduced aspect ratios. An enhancement of the load-carrying capacity ranges from 3.65% to 8.53%, for the reduction in the aspect ratio from 5 to 4.16 and 3.24, respectively. The confined specimens display varying peak axial strains, exhibiting commendable elastic–plastic behavior with non-linear ascending curves.