This research investigates the effectiveness of textile-reinforced mortar (TRM) systems for enhancing the load-carrying capacity of reinforced concrete columns (RCCs) with high aspect ratio. This study focuses on the use of the TRM systems as an alternative to fiber-reinforced polymer (FRP) systems, addressing challenges such as high cost, poor performance at high temperatures, incompatibility with substrate materials, and inability to be applied to damp surfaces. It includes a detailed analysis of the TRM systems’ effectiveness through an experimental evaluation, with a particular focus on RCCs having high aspect ratio. The obtained results reveal a significant strength improvement, ranging from 50% to 129%, for RCCs with the aspect ratios decreasing from three to two, with the workmanship contributing to the observed strength enhancement. Achieving a consistent and uniform distribution of the mortar layer, seamlessly aligned with the column surfaces, proves crucial. The study also highlights the importance of the mortar layer thickness, particularly in cases of the reduced aspect ratios. An enhancement of the load-carrying capacity ranges from 3.65% to 8.53%, for the reduction in the aspect ratio from 5 to 4.16 and 3.24, respectively. The confined specimens display varying peak axial strains, exhibiting commendable elastic–plastic behavior with non-linear ascending curves.
The need to improve existing structures has led to extensive research on strengthening techniques. Textile‐reinforced mortar (TRM) systems, which involve the integration of high‐strength fibers with inorganic matrix, have emerged as a highly promising and viable alternative. The objective of this research is to investigate the mechanical characteristics of inorganic mortar by examining different compositions involving sand, fibers, and cementitious materials. Various combinations were tested to evaluate their compressive strength, split tensile strength, and flexural strength. The findings indicated that a composite mixture (sample 12) comprising microsilica, silica sand, and optimized fibers demonstrated enhanced strength in all three assessments. Research highlights the significance of accurate mixing, additional components, and appropriate fibers to achieve intended performance of the mortar. The compatibility of the mortar is checked with substrate surface and textile sheet. Mortar is evaluated for splitting bond strength, slant shear test, direct pull‐off bond strength, and pull‐out strength. These results provide information about the strength and bonding characteristics of the mortar in different test scenarios. Values indicate how well the mortar performs with the substrate surface and the textile sheet under various types of stresses and loading conditions.
Structural engineering is one of the most important fields in civil engineering. The word ‘structure’ includes buildings, bridges, water-retaining structures, retaining walls, dams, etc. Reinforced cement concrete and steel structures are the most common types of structures. Structural engineering involves analysis, design, monitoring, damage detection, repair, rehabilitation or retrofitting, and preservation of historical monuments. Application of data analysis and advanced techniques of artificial intelligence (AI) in structural engineering started since last two decade. Advanced techniques of data analysis can minimize the huge experimental work in structural engineering and hence will be cost effective, time saving, and optimize the materials and human resources. This chapter aims to make the learners aware of the current trends and techniques in data analysis applicable in structural engineering. Concrete is the world's largest used construction material and hence the application of AI techniques in the field of concrete is discussed in detail in this chapter. The prediction of mechanical properties of concrete and mix design of concrete have been presented in detail. It can be concluded that the AI techniques provide a highly promising alternative approach for structural engineering problems. Data scientists should focus on relevant and noise-free data for targeted outcome.