Feras Abushakra

Dr. Feras Abushakra


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 December 2021 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
FAFeras Abushakra
Feras Abushakra
Nathan JeongNathan Jeong
Nathan Jeong
DEDeepak N. Elluru
Deepak N. Elluru
AAAbhishek K. Awasthi
Abhishek K. Awasthi
SKShriniwas Kolpuke
Shriniwas Kolpuke
SGS. Prasad Gogineni
S. Prasad Gogineni
This letter presents a novel approach to build a compact lightweight unmanned aerial vehicle (UAV) radar for remote sensing applications. The proposed radar exploits the recent advancement of an automotive radar chip for broadband chirp generation and rapid data processing. To compensate for the path losses and improve penetration at the millimeter-wave (mm-wave) frequency range, up- and down-converters are developed to generate an ultra-wideband (UWB) (3.25–5.15 GHz) chirp signal. The total payload of the radar is 2.5 kg. The proposed radar is installed on an UAV and tested in the field at a 100-m altitude above the ground surface. The results show that the compact low-power UWB radar can be used to map vegetation and soil moisture with fine resolution.

7 December 2022 in Current Research in Food Science
Verified
Journal Article
Open access
JGJoe Garvin
Joe Garvin
FAFeras Abushakra
Feras Abushakra
ZCZachary Choffin
Zachary Choffin
BSBayley Shiver
Bayley Shiver
YGYu Gan
Yu Gan
Nathan JeongNathan Jeong
Nathan Jeong
Microwave imaging technology is a useful method often applied in medical diagnosis and can be used by the food industry to ensure food safety and quality. For fruit, ripeness is the primary characteristic which determines quality for the consumer. This paper proposes a novel microwave imaging system to determine the ripeness of watermelon as a proof of concept. The design employs a circular array with 10 Coplanar Vivaldi antennas offering wide bandwidth, high gain, and high efficiency. S-parameters between antennas are collected quickly via automated channel switching for fast image generation. Eight different watermelon samples of varying ripeness, type, dimensions, and origin are scanned and imaged. Comparisons with sample cross-sections show distinct differences in image characteristics based on watermelon maturity. Sugar concentration of unripe and ripe watermelon is also measured and plotted for further validation of the imaging technique.

17 May 2022 in IEEE Access
Verified
Journal Article
Open access
FAFeras Abushakra
Feras Abushakra
Nathan JeongNathan Jeong
Nathan Jeong
A K AwasthiA K Awasthi
A K Awasthi
SKShriniwas Kolpuke
Shriniwas Kolpuke
CSChristopher Simpson
Christopher Simpson
SGS. Prasad Gogineni
S. Prasad Gogineni
This paper details a new approach for enhancing the radiation characteristics of a coplanar Vivaldi antenna (CVA) array. First, the inter-element mutual coupling is reduced by introducing slots in the conventional CVA array. Then, a low-profile dielectric patch antenna (DPA) is situated between the CVA flares when it acts as a traveling wave radiator at the higher frequency band. The DPA is excited by the loop current at the radiation part of the CVA, and a set of TE modes with omnidirectional radiation patterns are excited. This combination enhances the directivity in the broadside direction of the CVA and suppresses the grating lobes by as much as 10 dB. The 4 $\times $ 1 linear array covers the frequency range of 2.77-13.6 GHz, with 132% fractional bandwidth. Then, four of the proposed linear arrays are connected to constitute an 8 $\times $ 2 planar array to achieve a gain of 15.2-24.6 dBi. The proposed arrays are fabricated, tested, and mounted on a small unmanned aerial system (sUAS) for radar measurements. The real-life field radar results with the proposed arrays are presented including an echogram of the scanned area.

21 November 2022 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
SKShriniwas Kolpuke
Shriniwas Kolpuke
CSChristopher D. Simpson
Christopher D. Simpson
FAFeras Abushakra
Feras Abushakra
A K AwasthiA K Awasthi
A K Awasthi
OROmid Reyhanigalangashi
Omid Reyhanigalangashi
SGS. Prasad Gogineni
S. Prasad Gogineni
We developed and deployed a high sensitivity and low transmit power airborne UWB FMCW radar for snow depth measurements. The radar has a near-ideal point target response so that we can produce near-real-time snow thickness maps after each survey flight. The improved performance is achieved by carefully designing the radar hardware to reduce internal reflections between various components, third-order products generated by mixers, higher-order harmonics generated in multipliers and non-linear devices, and amplitude and phase errors in transmitted chirp signals. In addition, we performed extensive linear and non-linear system simulations to predict degradations in the radar hardware in advance and applied the remedies to correct them. These improvements allowed for near-real-time data products to be generated by reducing the need for advanced signal processing techniques. We also developed a T-shape Mills-Cross antenna array to obtain a small overlapped footprint of transmit and receive antennas. We performed measurements over snow in Grand Mesa, Colorado, from March to April 2022, and the radar mapped the top and bottom interfaces and density changes of 1.2-2.1m of snow. We generated a snow thickness map from the data collected over the grid flown and compared results with in-situ measurements. The comparison between radar estimates and in-situ measurements shows that the average snow depths obtained from the radar data are within a standard deviation from the mean of in-situ measurements.

2 May 2022 in IEEE Access
Verified
Journal Article
Open access
OROmid Reyhanigalangashi
Omid Reyhanigalangashi
DTDrew Taylor
Drew Taylor
SKShriniwas Kolpuke
Shriniwas Kolpuke
DEDeepak N. Elluru
Deepak N. Elluru
FAFeras Abushakra
Feras Abushakra
SGSiva-Prasad Gogineni
Siva-Prasad Gogineni
This paper presents the design and development of a digital two-channel chirp synthesizer using a field-programmable gate array (FPGA) device. To achieve an integrated solution, the design was implemented on radio-frequency system-on-chip (RF-SoC) technology that includes digital-to-analog converters (DACs) and other radio-frequency components on-chip. To overcome the timing errors in high-speed design with DACs operating at 6.144 GHz, a memory-stitching concept was used. A prototype was developed to validate this concept by generating a baseband chirp with a bandwidth of 1.7 GHz and a sweep time of 36 $\mu \text{s}$ . The synthetic chirp was upconverted to 3.572-5.272 GHz for use as the transmit signal for an ultra-wideband radar to characterize the chirp using a 1 km long optical delay line. The transmit signal was analyzed in terms of phase and amplitude errors and corrected for these errors. The root-mean-square (RMS) frequency deviation of the predistorted chirp from linearity over the 1.7 GHz bandwidth is 9.64 kHz, realizing a chirp linearity of 0.00057%. The measurement data show comparable performance of our chirp synthesizer against a commercially available arbitrary-waveform-generator (AWG) operating at a sampling rate of 60 GHz. The reported chirp synthesizer can be used in frequency-modulated continuous-wave (FM-CW) and stretch radars. Such radars are widely used for a variety of remote sensing measurements.

22 March 2023 in IEEE Journal of Radio Frequency Identification
Verified
Journal Article
Closed access
FAFeras Abushakra
Feras Abushakra
SKShriniwas Kolpuke
Shriniwas Kolpuke
CSChristopher Simpson
Christopher Simpson
OROmid Reyhanigalangashi
Omid Reyhanigalangashi
JPJacob Pierce
Jacob Pierce
SGS. Prasad Gogineni
S. Prasad Gogineni
This paper presents results from a field deployment of a small Unmanned Aircraft System (sUAS) radar in Colorado-Grand Mesa during Spring-2022 for measurements over snow. The stand-alone, low-power, compact, and Frequency Modulated Continuous Wave (FMCW) radar on a sUAS is used for these measurements. The radar operates over the frequency range of 2.8-5.8 GHz. The transmit signal is obtained by down-converting 77-81 GHz chirp generated with an automotive radar. The radar operates with a low output power of only 3 dBm (2 mW) to mitigate interference to nearby communication systems with a chirp duration of 250 μs. The received signal is up-converted back to 77-81 GHz for digitization and processing using the automotive radar data capture board. The radar data are processed with a fully focused Synthetic Aperture Radar (SAR) algorithm after applying phase and amplitude corrections to the transmitter chirp to obtain nearly ideal point target responses. The radar mapped air-snow and snow-ground surface interfaces as well as the snow internal layers with snow depth exceeding 2 m in areas covered with 15-25 m tall trees. In addition, the radar-generated snow thicknesses are within ±10 cm of in-situ measurements.