20 October 2020 in IEEE Transactions on Antennas and Propagation
This paper presents an antenna structure with a reconfigurable pattern and polarization for CubeSat applications. The proposed antenna is based on spatial-mapping origami theory and consists of a center-fed 4-way Gysel power divider, delay lines, inside Lamina Emergent Torsion (LET) joints, and four thick planar dipole antennas. The LET joints are used to distribute the mechanical stress of a rigid planar material to form a flexible planar spring structure. The proposed antenna has monopole-like omnidirectional linearly polarized gain patterns in planar mode. Its gain value is about 0.5 dBi at 5.8 GHz. In folded mode, the antenna has about a circularly polarized gain value of about 8.07 dBic and broadside radiation patterns. The measured crosspolarization suppression ratio is about 25 dB, and the axial ratio (AR) value is 1.13 dB at 5.8 GHz. The size of the antenna in planar mode with a cross-shape is 100 × 100 × 0.5 mm3, and its size is in folded mode is 32.5 × 32.5 × 32.5 mm3. The size of the antenna in inactive mode is 35 × 35 × 3 mm3, and its total weight is only 4.73 g.
16 March 2017 in IEEE Transactions on Microwave Theory and Techniques
Conventional tightly coupled inductive charging has been popular in the mobile device market for years. However, tightly coupled solutions have been unable to efficiently charge a metal encased device due to substantial heat generation. In this paper, we demonstrate that loosely coupled inductive charging technology is a viable solution to charge a metal encased device. Ample power can be delivered through the metal case with negligible case heating. Our prototype is built by machining a lump of aluminum which is attached to a commercial smart phone. Resonator coupling efficiency is measured to be 90% with a certified AirFuel Alliance transmitter. Measured power to a load is 8.2 W, which is suitable for mobile devices.
14 December 2021 in IEEE Microwave and Wireless Components Letters
This letter presents a novel approach to build a compact lightweight unmanned aerial vehicle (UAV) radar for remote sensing applications. The proposed radar exploits the recent advancement of an automotive radar chip for broadband chirp generation and rapid data processing. To compensate for the path losses and improve penetration at the millimeter-wave (mm-wave) frequency range, up- and down-converters are developed to generate an ultra-wideband (UWB) (3.25–5.15 GHz) chirp signal. The total payload of the radar is 2.5 kg. The proposed radar is installed on an UAV and tested in the field at a 100-m altitude above the ground surface. The results show that the compact low-power UWB radar can be used to map vegetation and soil moisture with fine resolution.
7 December 2022 in Current Research in Food Science
Microwave imaging technology is a useful method often applied in medical diagnosis and can be used by the food industry to ensure food safety and quality. For fruit, ripeness is the primary characteristic which determines quality for the consumer. This paper proposes a novel microwave imaging system to determine the ripeness of watermelon as a proof of concept. The design employs a circular array with 10 Coplanar Vivaldi antennas offering wide bandwidth, high gain, and high efficiency. S-parameters between antennas are collected quickly via automated channel switching for fast image generation. Eight different watermelon samples of varying ripeness, type, dimensions, and origin are scanned and imaged. Comparisons with sample cross-sections show distinct differences in image characteristics based on watermelon maturity. Sugar concentration of unripe and ripe watermelon is also measured and plotted for further validation of the imaging technique.