Efficient all-perovskite tandem cells: Organic-inorganic perovskite films can boost the output of conventional silicon solar cells in tandem geometries by utilizing more of the light at the blue end of the solar spectrum. Tandem cells that use only perovskite films have been less successful because of the lack of a suitable material with a low bandgap that can replace silicon. Tong et al. report that a mixed tin-lead organic-inorganic material containing a small fraction of guanidinium thiocyanate has a low bandgap, long charge-carrier lifetime, and efficiencies around 25%. Science , this issue p. 475

Recent achievements of 2D perovskites for various optoelectronic applications along with their basic properties and future opportunities are discussed.

Engineering perovskites with anions: The bandgap of the perovskite top layer in tandem silicon solar cells must be tuned to ∼1.7 electron volts. Usually, the cation composition is varied because the bromine-rich anion compositions with wide bandgaps are structurally unstable. Kim et al. show that by using phenethylammonium as a two-dimensional additive, along with iodine and thiocyanate, bromine-rich perovskite films can be stabilized. A tandem silicon cell delivered >26% certified power conversion efficiency, and a perovskite device maintained 80% of its initial power conversion efficiency of >20% after 1000 hours under illumination. Science , this issue p. 155

Directing efficient hole transport: Surface defects in three-dimensional perovskites can decrease performance but can be healed with coatings based on two-dimensional (2D) perovskite such as Ruddlesden-Popper phases. However, the bulky organic groups of these 2D phases can lead to low and anisotropic charge transport. F. Zhang et al . show that a metastable polymorph of a Dion-Jacobson 2D structure based on asymmetric organic molecules reduced the energy barrier for hole transport and their transport through the layer. When used as a top layer for a triple-cation mixed-halide perovskite, a solar cell retained 90% of its initial power conversion efficiency of 24.7% after 1000 hours of operation at approximately 40°C in nitrogen. —PDS