Thailand’s vernacular and religious architecture is rich and unique. Wat Chedi, a temple in the southern part of the country, is visited by thousands of Buddhists and tourists every month. Despite of its national importance, Wat Chedi is not considered as a historical site and therefore, the site is undervalued. This study aims to assess the value of Wat Chedi’s architectural design and features by proposing a novel point-based criteria based on aesthetic, scientific, educational, and social values. The novel criteria also consider factors such as changes and the respect for changes, which are aligned with the concept of conservation in Southeast Asia. The proposed criteria are then applied to Wat Chedi and to the historic Wat Phra Mahathat Woramahawihan temple, and the results are compared and discussed. The results indicated that whilst Wat Chedi has changed both physically and culturally along with the community and era, it is still a site with significant vernacular architecture and ‘high’ aesthetic, scientific, educational, and social values, whilst the historical value of Wat Chedi is classified as ‘moderate’. Moreover, Wat Chadi’s architecture is proven to be a symbol of people’s spiritual beliefs. It is proposed that the Fine Arts Department of Thailand (and/or relevant agencies) should adopt the criteria proposed in this study to assess other vernacular and religious sites across the country. It also proposed to register Wat Chedi as a valuable intangible cultural heritage site of faith to be preserved for future generations. This article contributes towards developing more efficient tools to assess the vernacular architecture of faith in Southeast Asia, which in turn can help protect important sites for future generations.
Bamboo is extensively used in vernacular housing across Southeast Asia. However, limited research has examined the indoor environmental quality (IEQ) and sound insulation of bamboo houses. This study aims to propose a new assessment approach for vernacular bamboo houses based on the LEED v4 IEQ criteria, whose application to vernacular architecture has been rather limited. As a first objective, field measurements were conducted in five houses located in southern Thailand to obtain thermal comfort, daylight performance and acoustic quality. One of the houses had modern brick-and-plaster walls (W1), whereas another four houses (W2–W5) were built with woven bamboo walls of different weaving patterns and thicknesses. A second objective consisted in performing IEQ assessments and life cycle assessments (LCA), also providing practical recommendations. The results show that woven bamboo walls provided higher indoor illuminance levels than brick walls, exceeding 300 lux between 09:00 and 15:00 h. Results from a bioclimatic analysis indicate that most indoor conditions were outside the thermal comfort zone, except in houses with W2 and W4 during early morning hours (00:00–05:30 h). Nevertheless, thermal comfort can be improved by increasing the air velocity to 0.4–1.0 m/s and by selecting a wall “gap density” of 4–6%. In terms of acoustic performance, all bamboo walls satisfied the LEED v4 requirement (≤45 dB), except wall W3 which had a high “gap density” (10%). The new approach can be used to assess and improve the comfort conditions in bamboo housing in tropical climates, thus supporting conservation strategies and promoting bamboo as a sustainable building material.