The increase in the global diabetic population is leading to an increase in associated complications such as diabetic foot ulceration (DFU), associated amputations, morbidity, which substantial treatment costs. Early identification of DFU risk is therefore of great benefit. International guidelines recommend off-loading is the most important intervention for healing and prevention of DFU, with current research focused on pressure measurement techniques. The contribution of strain to DFU formation is not well understood due to challenges in measurement. The limited data available in the literature suggest that plantar strain is involved in ulcer formation. As a consequence, there is a need for plantar strain measurement systems to advance understanding and inform clinical treatment. A method was developed to determine plantar strain based on a Digital Image Correlation (DIC) approach. A speckle pattern is applied to the plantar aspect of the foot using a low ink transference method. A raised walkway with transparent panels is combined with a calibrated camera to capture images of the plantar aspect throughout a single stance phase. Plantar strain is then determined using 2D DIC and custom analysis summarises these data into clinically relevant metrics. A feasibility study involving six healthy participants was used to assess the efficacy of this new technique. The feasibility study successfully captured plantar surface strain characteristics continuously throughout the stance phase for all participants. Peak mean and averaged mean strains varied in location between participants when mapped into anatomical regions of plantar interest, ranging from the calcaneus to the metatarsal heads and hallux. This method provides the ability to measure plantar skin strain for use in both research and clinical environments. It has the potential to inform improved understanding of the role of strain in DFU formation. Further studies using this technique can support these ambitions and help differentiate between healthy and abnormal plantar strain regimes.

Introduction: Under plantar loading regimes, it is accepted that both pressure and shear strain biomechanically contribute to formation and deterioration of diabetic foot ulceration (DFU). Plantar foot strain characteristics in the at-risk diabetic foot are little researched due to lack of measurement devices. Plantar pressure comparatively, is widely quantified and used in the characterisation of diabetic foot ulceration risk, with a range of clinically implemented pressure measurement devices on the market. With the development of novel strain quantification methods in its infancy, feasibility testing and validation of these measurement devices for use is required. Initial studies centre on normal walking speed, reflecting common activities of daily living, but evaluating response to differing gait loading regimes is needed to support the use of such technologies for potential clinical translation. This study evaluates the effects of speed and inclination on stance time, strain location and strain response using a low-cost novel strain measurement insole.Methods: The STrain Analysis and Mapping of the Plantar Aspect (STAMPS) insole has been developed, and feasibility tested under self-selected normal walking speeds to characterise plantar foot strain, with testing beyond this limited regime required. A treadmill was implemented to standardise speed and inclination for a range of daily plantar loading conditions. A small cohort, comprising of five non-diabetic participants, were examined at slow (0.75 m/s), normal (1.25 m/s) and brisk (2 m/s) walking speeds and normal speed at inclination (10% gradient).Results: Plantar strain active regions were seen to increase with increasing speed across all participants. With inclination, it was seen that strain active regions reduce in the hindfoot and show a tendency to forefoot with discretionary changes to strain seen. Stance time decreases with increasing speed, as expected, with reduced stance time with inclination.Discussion: Comparison of the strain response and stance time should be considered when evaluating foot biomechanics in diabetic populations to assess strain time interval effects. This study supports the evaluation of the STAMPS insole to successfully track strain changes under differing plantar loading conditions and warrants further investigation of healthy and diabetic cohorts to assess the implications for use as a risk assessment tool for DFU.

Diabetic foot ulceration is driven by peripheral neuropathy, resulting in abnormal foot biomechanics and elevated plantar load. Plantar load comprises normal pressure and tangential shear stress. Currently, there are no in-shoe devices measuring both components of plantar load. The STAMPS (STrain Analysis and Mapping of the Plantar Surface) system was developed to address this and utilises digital image correlation (DIC) to determine the strain sustained by a plastically deformable insole, providing an assessment of plantar load at the foot-surface interface during gait. STAMPS was developed as a multi-layered insole, comprising a deformable mid-layer, onto which a stochastic speckle pattern film is applied. A custom-built imaging platform is used to obtain high resolution pre- and post-walking images. Images are imported into commercially available DIC software (GOM Correlate, 2020) to obtain pointwise strain data. The strain and displacement data are exported and post-processed with custom analysis routines (MATLAB, Mathworks Inc.), to obtain the resultant global and regional peak strain (S _MAG ), antero-posterior strain (S _AP ) and medio-lateral strain (S _ML ). To validate the core technique an experimental test process used a Universal Mechanical Tester (UMT) system (UMT TriboLab, Bruker) to apply controlled vertical and tangential load regimes to the proposed multi-layer insole. A pilot study was then conducted to assess the efficacy of using the STAMPS system to measure in-shoe plantar strain in three healthy participants. Each participant walked 10 steps on the STAMPS insole using a standardised shoe. They also walked 10 m in the same shoe using a plantar pressure measurement insole (Novel Pedar®) to record peak plantar pressure (PPP) as a gold-standard comparator. The results of the experimental validation tests show that with increased normal force, at a constant shear distance, S _MAG increased in a linear fashion. Furthermore, they showed that with increased shear distance, at a constant force, S _MAG increased. The results of the pilot study found participant 1 demonstrated greatest S _MAG in the region toes 3-5 (15.31%). The highest mean S _MAG for participant 2 was at the hallux (29.31%). Participant 3 exhibited highest strain in the regions of the 1 ^st and 2 ^nd metatarsal heads (58.85% and 41.62% respectively). Increased PPP was strongly associated with increased S _MAG with a Spearman’s correlation coefficient 0.673 (p <0.0001). This study has demonstrated the efficacy of a novel method to assess plantar load across the plantar surface of the foot. Experimental testing validated the sensitivity of the method to both normal pressure and tangential shear stress. This technique was successfully incorporated into the STAMPS insole to reliably measure and quantify the cumulative degree of strain sustained by a plastically deformable insole during a period of gait, which can be used to infer plantar loading patterns. Future work will explore how these measures relate to different pathologies, such as regions at risk of diabetic foot ulceration.

Diabetic foot ulceration is linked to high amputation and mortality rates, with the substantial associated annual spend on the at-risk diabetic foot reflecting the intensive time and labour involved in treatment. Assessing plantar interactions and developing improved understanding of the formation pathways of diabetic ulceration is important to orthotic interventions and patient outcomes. Plantar skin surrogates which emulate the mechanical and tribological characteristics can help improve physical models of ulceration, reduce reliance on cadaveric use and inform more complex computational modelling approaches. The information available from existing studies to characterise plantar skin is limited, typically featuring ex-vivo representations of skin and subcutaneous tissue combined and given focus to shear studies with time dependency. The aim of this study is to improve understanding of plantar tissue mechanics by assessing the mechanical characteristics of plantar skin in two groups; (1) non-diabetic and (2) diabetic donors without the subcutaneous tissue attachment of previous work in this field. Digital image correlation was used to assess inherent skin pre-tension of the plantar rearfoot prior to dissection. Young's modulus, storage and loss moduli were tested for using tensile stress-strain failure analysis and tensile and compressive dynamic mechanical analysis, which was conducted on excised plantar rearfoot donor specimens for both disease state cohorts at frequencies reflecting those achieved in activities of daily living. Plantar skin thickness for donor specimens were comparable to values obtained using ultrasound acquired in vivo values. Median tensile storage and loss moduli, along with Young's modulus, was higher in the diabetic cohort. With a mean Young's modulus of 0.83 ± 0.49 MPa and 1.33 ± 0.43 MPa for non-diabetic and diabetic specimens respectively. Compressive studies showed consistency between cohorts for median storage and loss moduli. The outcomes from this study show mechanical characteristics of plantar skin without the involvement of subcuteanous tissues under reflective daily achieved loading regimes, showing differences in the non-diabetic and diabetic specimens trialled to support improved understanding of plantar tissue response under tribological interactions.

Background: STrain Analysis and Mapping of the Plantar Surface (STAMPS) is an innovative system using a plastically deformable insole with a stochastic speckle pattern, developed to measure peak plantar shear strain (S _MAG ) in people with diabetes. The aim was to determine whether patients with a prior DFU exhibit higher S _MAG than low‐risk patients. Methods: Participants walked 20 steps with the STAMPS insole within a standardised shoe and 10 m with the Pedar‐X™ (Novel, Inc.) measurement insole. S _MAG was compared in participants with either a recently healed diabetic foot ulcer (Prior DFU group) or diabetes and low risk for ulceration (NICE NG‐19). Measurements were repeated three times. Images were analysed using the DIC software ‘GOM correlate’ (Zeiss, Inc.) and post‐processed using MATLAB. Outcomes were overall and regional peak S _MAG and peak plantar pressure (PPP). Consenting prior DFU participants subsequently repeated the walking assessments wearing a diabetic below‐knee walker‐boot. Overall and regional peak S _MAG and PPP were compared between the standard shoe and walker‐boot. Results: Twenty participants with prior DFU and 14 at low risk were recruited. Overall peak S _MAG within the prior DFU and low‐risk groups was 27.9% (IQR – 17.3–37.5%) and 11.5% (IQR 9.6–20.3%) respectively, p = 0.003. Within the prior DFU group, S _MAG was elevated at DFU sites compared with non‐DFU sites; peak S _MAG was 11.7% (IQR 7.6–25.6%) and 7.70% (4.4–13.1%). Sixteen participants completed the offloading assessments. Peak S _MAG within the standard shoe and walker‐boot was 27.4% (IQR 17.2–32.7) and 8.03% (IQR 6.3–12.2). Conclusion: Participants with a recently healed DFU exhibited elevated strain characteristics compared with the low‐risk group. Furthermore, prospective work will explore the relationship between S _MAG and DFU formation.

The increase in the global diabetic population is leading to an increase in associated complications such as diabetic foot ulceration (DFU), associated amputations, morbidity, which substantial treatment costs. Early identification of DFU risk is therefore of great benefit. International guidelines recommend off-loading is the most important intervention for healing and prevention of DFU, with current research focused on pressure measurement techniques. The contribution of strain to DFU formation is not well understood due to challenges in measurement. The limited data available in the literature suggest that plantar strain is involved in ulcer formation. As a consequence, there is a need for plantar strain measurement systems to advance understanding and inform clinical treatment. A method was developed to determine plantar strain based on a Digital Image Correlation (DIC) approach. A speckle pattern is applied to the plantar aspect of the foot using a low ink transference method. A raised walkway with transparent panels is combined with a calibrated camera to capture images of the plantar aspect throughout a single stance phase. Plantar strain is then determined using 2D DIC and custom analysis summarises these data into clinically relevant metrics. A feasibility study involving six healthy participants was used to assess the efficacy of this new technique. The feasibility study successfully captured plantar surface strain characteristics continuously throughout the stance phase for all participants. Peak mean and averaged mean strains varied in location between participants when mapped into anatomical regions of plantar interest, ranging from the calcaneus to the metatarsal heads and hallux. This method provides the ability to measure plantar skin strain for use in both research and clinical environments. It has the potential to inform improved understanding of the role of strain in DFU formation. Further studies using this technique can support these ambitions and help differentiate between healthy and abnormal plantar strain regimes.