Hydrophobic thin films have gained significant attention due to their broad applications in self-cleaning, anti-corrosion, anti-icing, medicine, oil–water separation, and other fields. The target hydrophobic materials can be deposited onto various surfaces thanks to the scalable and highly reproducible nature of magnetron sputtering, which is comprehensively overviewed in this review. While alternative preparation methods have been extensively analyzed, a systematic understanding of hydrophobic thin films fabricated using magnetron sputtering deposition is still absent. After outlining the fundamental mechanism of hydrophobicity, this review briefly summarizes three types of sputtering-deposited thin films that originate from oxides, polytetrafluoroethylene (PTFE), and diamond-like carbon (DLC), respectively, primarily focusing on the recent advances in their preparation, characteristics, and applications. Finally, the future applications, current challenges, and development of hydrophobic thin films are discussed, and a brief perspective on future research directions is provided.
In this work, a novel multifunctional film with durable antifogging performance and remarkable optical property is designed. By doping and hybridization to build an organic–inorganic siloxane network, the surface achieves long‐lasting wettability and superhydrophilicity with a water contact angle of 0°, which is maintained within 10° for over 130 days. The low refractive index endows the hybrid film with excellent optical property, which the average transmittance (380–1100 nm) of the film is 97.60% with the peak transmittance of 99.48%. By this design, the film performs well in the felt abrasion test, water impact test, X‐cut tape test, tape‐peeling test, chemical stability test, and anti‐dust test. Due to the abundant hydroxyl radicals on the surface, the film also exhibits excellent performance, achieving 92.73% degradation of methylene blue solution (10 ppm) and 39.53% degradation of rhodamine B (10 ppm) with good reproducibility in cyclic measurements.
This article introduces a novel approach to improve electronic nose classification accuracy by optimizing sensor arrays and aligning features. This involves selecting the best sensor combinations and reducing redundant information for better odor recognition. We employ a feature alignment algorithm to address the discrepancies that impede model sharing between electronic nose devices. Our research focuses on overcoming challenges associated with material selection and the constraints of transferring classification models across different electronic nose devices for drug classification. We fabricated six SnO2-based MEMS gas sensors using physical vapor deposition. The ReliefF algorithm was employed to rank and score each sensor’s contribution to drug classification, identifying the optimal sensor array. We then applied feature alignment from transfer learning to enhance model sharing among three inconsistent devices. This study resolves the issue of electronic noses being hard to use on the same database due to hardware inconsistencies in batch production, laying the groundwork for future mass production.