Hydrophobic thin films have gained significant attention due to their broad applications in self-cleaning, anti-corrosion, anti-icing, medicine, oil–water separation, and other fields. The target hydrophobic materials can be deposited onto various surfaces thanks to the scalable and highly reproducible nature of magnetron sputtering, which is comprehensively overviewed in this review. While alternative preparation methods have been extensively analyzed, a systematic understanding of hydrophobic thin films fabricated using magnetron sputtering deposition is still absent. After outlining the fundamental mechanism of hydrophobicity, this review briefly summarizes three types of sputtering-deposited thin films that originate from oxides, polytetrafluoroethylene (PTFE), and diamond-like carbon (DLC), respectively, primarily focusing on the recent advances in their preparation, characteristics, and applications. Finally, the future applications, current challenges, and development of hydrophobic thin films are discussed, and a brief perspective on future research directions is provided.
Lithium metal is considered a promising anode material for lithium secondary batteries by virtue of its ultra-high theoretical specific capacity, low redox potential, and low density, while the application of lithium is still challenging due to its high activity. Lithium metal easily reacts with the electrolyte during the cycling process, resulting in the continuous rupture and reconstruction of the formed SEI layer, which reduces the cycling reversibility. On the other hand, repeated lithium plating/stripping processes can lead to uncontrolled growth of lithium dendrites and a series of safety issues caused by short-circuiting of the battery. Currently, modification of the battery separator layer is a good strategy to inhibit lithium dendrite growth, which can improve the Coulombic efficiency in the cycle. This paper reviews the preparation, behavior, and mechanism of the modified coatings using metals, metal oxides, nitrides, and other materials on the separator to inhibit the formation of lithium dendrites and achieve better stable electrochemical cycles. Finally, further strategies to inhibit lithium dendrite growth are proposed.
In this paper, flexible Ag electrodes with a hexagonal micromesh structure were fabricated on PET substrate using a photolithography technique. The effect of film thickness on optical and electrical properties of Ag electrodes was investigated systematically. Furthermore, these flexible transparent Ag mesh electrodes were firstly applied to a polymer dispersed liquid crystal (PDLC) device and its performance was evaluated. All of the Ag electrodes exhibited a high average transmittance of about 80.2–85.0% in the visible range (400–800 nm), and the minimum sheet resistance value reached 8.2 Ω sq−1. The prepared Ag mesh also showed an excellent performance of adhesion and bending, demonstrating its superior durability. The PDLC device based on Ag mesh electrodes showed comparable performance with that using ITO electrodes, indicating that the Ag mesh film can be a good substitution for ITO electrodes in PDLC devices and may find practical application in large area flexible devices.