Aircraft operations from above ground level to 3000 feet impact air quality and cause health issues, particularly for people working and living in and around airports. This paper evaluates the current emission calculation methods to identify the most accurate way to generate an emission inventory. Journal articles on aircraft influence on air quality were selected for a systematic literature review (SLR). After screening 277 articles written in English, 60 articles on emission calculation methods were included in the analysis. Based on the analysis, air quality can be more accurately assessed when considering direct emissions from an aircraft than when measuring atmospheric pollutant concentrations. While the International Civil Aviation Organization’s (ICAO) advanced approach was the most widely used from the literature reviewed, airport-specific, time-in-mode, and actual atmospheric conditions where aircraft operate offer the potential for significant improvement. The SLR demonstrates a need for more accurate emission calculation methods to assess the aircraft’s influence on air quality. The SLR guides airlines and airports to maintain an accurate emission inventory, which will set future targets to improve air quality.
27 May 2020 in Transportation Research Record: Journal of the Transportation Research Board
The importance of airport emission inventory is more specific in the local context as it directly affects the local air quality. The specific gap addressed by this research is evaluating the CO2 emission from aircrafts within the landing and take-off (LTO) cycle. Using currently available methodologies for assessing emission within the LTO cycle in the Sri Lankan context has significant limitations, such as unavailability of relevant operational data and the International Civil Aviation Organization (ICAO)-specified “time-in-mode”(TIM) (e.g., take-off, climb-out, idle, and approach) estimates at different phases of the LTO cycle being inconsistent with local conditions. Such industry-wide standards have been found to over or underestimate actual volumes specific to local conditions. In this research, data collected from online flight-tracking services and daily aircraft movement record (DAMR) data maintained by the local air traffic service provider were used to estimate TIM values according to site-specific conditions. Existing literature to some extent addresses the assessment of CO2 emission levels under different phases of flight separately. In this research, a methodology was developed with available data sources to estimate CO2 emission levels under different phases of flight separately within the LTO cycle. The methodology was applied to Bandaranaike International Airport, Sri Lanka. This approach can be applied to similar scenarios in which operational data limitations exist as elaborated in the study.
Avoiding flight delays has become a crucial factor in each airport and airline since a huge economic cost results as consequences. Researches are conducted to measure aviation delay and its economic cost [1] while its environmental cost is sparsely addressed. In this research, the delay of departure flights at ground operations are referred when waiting to take-off. More emissions arouse than usual from excess fuel consumption when a flight experiences delay. A methodology is developed in this research to evaluate the impact of departure flight delays at ground operations. Bandaranaike International Airport (BIA) is taken as a case for developing the methodology