Cotton and wool substrates were treated with natural colorants from plants and their antibacterial activity against Staphylococcus aureus and Escherichia coli were evaluated. The studies encompassed qualitative evaluation in terms of zone of inhibition of the treated substrate and quantitative evaluation in terms of percentage reduction in bacteria. Also, the durability of the natural colorant agent to laundering and exposure to light was determined. Of the six colorants investigated in this study, the colorant obtained from pomegranate's bark and rind indicated presence of good antibacterial activity against both gram-positive as well as gram-negative bacteria.
Cotton gin trash (CGT), a lignocellulosic waste generated during cotton fibre processing, has recently received significant attention for production of composite bio-plastics. However, earlier studies were limited to either with biodegradable polymers, through small-scale solution-casting method, or using industrially adaptable extrusion route, but with non-biodegradable polymers. In this study, a scale-up production of completely biodegradable CGT composite plastic film with adjustable biodegradation rate is proposed. First using a twin screw extruder, the prepared CGT powder was combined with polycaprolactone (PCL) to form pellets, and then using the compressing moulding, the pellets were transformed into bio-plastic composite films. Hydrophilic polyethylene glycol (PEG) was used as a plasticiser in the mixture and its impact on the biodegradation rate was analysed. The morphology of CGT bio-plastic composite films showed even distribution of CGT powder within the PCL matrix. The CGT incorporation improved the UV resistance, thermal stability, and Young’s modulus of PCL material. Further, the flexibility and mixing properties of the composites were improved by PEG. Overall, this study demonstrated a sustainable production method of CGT bio-plastic films using the whole CGT and without any waste residue produced, where the degradation of the produced composite films can be adjusted to minimise the environmental impact.
Cotton biomass residues consist of an important portion of the agricultural byproducts. In this work, we systematically analyzed and compared the morphology and thermal properties of nine cotton biomass byproducts. The unique tubular and/or porous morphology of some samples (e.g., main stems, branch stems, and petioles) implied their structural advantage in the development of electric supercapacitors and pollutant absorbents. The higher heating values of the nine samples ranged between 17 and 20 MJ kg−1, higher than some of the other common agricultural byproducts (e.g., rice husk and sugarcane bagasse). The moisture content showed a positive correlation (p > 0.05) to the dehydration temperature of the differential scanning calorimetric plots. The residual char after thermogravimetric analysis could be separated into a high-yield cluster (34.4–26.6%) of leaf blades, bracts/peduncles, burrs, defatted meal, and petioles, and a low-yield cluster (20.5–13.6%) of main stems, branch stems, cotton gin waste, and cottonseed hull. These observations and data are useful for a better understanding of the fundamental chemistry of cotton biomass byproducts. Growing knowledge is useful for improving their recycling strategies and may shed light on the exploration of new value-added products or applications from these cotton biomass byproducts for a circular economy with sustainable agriculture.
22 April 2026 in Journal of Environmental Chemical Engineering