Xiang Chen

Xiang Chen


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 March 2024 in Coatings
Verified
Journal Article
Open access
PDF file
LYLiang Yang
Liang Yang
XCXiang Chen
Xiang Chen
LGLinhao Gu
Linhao Gu
陈艳陈 艳
陈 艳
SSshuang shi
shuang shi
A new kind of modified emulsified bitumen used to plug a microcrack was studied. The sizes of high-temperature emulsified bitumen were fit for the sizes of the microcrack, which were approved by the scanning electron microscope and laser particle size analyzer. Some tests have been designed to demonstrate that the polymer could be used to promote the softening point of modified asphalt, and the high-temperature emulsified bitumen has also shown an excellent performance in terms of static filtration, the viscous coefficient, and extreme pressure lubrication, as well as to inhibit ting shale expansion. The permeability recovery could reach 88.26%, which meets the specification requirements. The mud cake, which was formed by high-temperature emulsified bitumen as an additive, was thin, tough, and dense, which was proved by the scanning electron microscope. The process used to obtain this additive was simple, and the performance of the plugging microfracture was excellent, so this kind of plugging agent could have a better application future.

11 June 2023 in Materials
Verified
Journal Article
Open access
PDF file
SSshuang shi
shuang shi
MWMiao Wang
Miao Wang
LGLinhao Gu
Linhao Gu
XCXiang Chen
Xiang Chen
YZYanning Zhang
Yanning Zhang
The mechanical properties of the subgrade have a significant impact on the service life and pavement performance of the superstructure of pavement. By adding admixtures and via other means to strengthen the adhesion between soil particles, the strength and stiffness of the soil can be improved to ensure the long-term stability of pavement structures. In this study, a mixture of polymer particles and nanomaterials was used as a curing agent to examine the curing mechanism and mechanical properties of subgrade soil. Using microscopic experiments, the strengthening mechanism of solidified soil was analyzed with scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Fourier infrared spectroscopy (FTIR), and X-ray diffraction (XDR). The results showed that with the addition of the curing agent, small cementing substances on the surface of soil minerals filled the pores between minerals. At the same time, with an increase in the curing age, the colloidal particles in the soil increased, and some of them formed large aggregate structures that gradually covered the surface of the soil particles and minerals. By enhancing the cohesiveness and integrity between different particles, the overall structure of the soil became denser. Through pH tests, it was found that the age had a certain effect on the pH of solidified soil, but the effect was not obvious. Through the comparative analysis of elements in plain soil and solidified soil, it was found that no new chemical elements were produced in the solidified soil, indicating that the curing agent does not have negative impacts on the environment.

14 August 2023 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
XCXiang Chen
Xiang Chen
XWXiaohu Wang
Xiaohu Wang
FTFanlong Tang
Fanlong Tang
STSusan Tighe
Susan Tighe
NLNingyuan Li
Ningyuan Li
A cold mix overlay is a typical preventive maintenance treatment that is applied to an existing pavement surface. However, the service life of cold mix overlay is limited because of its poor skid resistance and high tendency to crack, especially in cold regions. This study presents a new technology of high-performance cold mix overlay materials that slows skid resistance reduction, increases the resistance to thermal cracking, and shows long-lasting anti−icing performance. The sustainable performance of paving cold mix overlays can be assured by adding high-performance anti−icing agents, fiber, and emulsified asphalt to the cold mix. A series of laboratory tests were conducted to evaluate the performance and anti−icing effect of the cold mix. The results showed that the freezing temperature of the cold mix dropped to more than −10 °C. The open-to-traffic time can be shortened to 3.5 h after construction. The anti-wearing ability and cracking resistance were evidently increased in comparison with traditional micro-surfacing techniques by conducting indoor wet-wheel wearing tests and low-temperature bending beam tests. Based on the study, the new-tech cold mix overlay has shown promising applications in North America.