To explore the effect of different emulsifier contents on the stability performance of biomass-emulsified asphalt, three types of emulsified asphalt with 1%, 3%, and 5% anionic emulsifiers were prepared and analyzed by molecular dynamics simulation and macroscopic experiments. Firstly, we used molecular simulation software (Material Studio, MS) to construct a model of biomass-emulsified asphalt with different emulsifier contents and analyzed the microscopic mechanism of the emulsifier to improve the stability of the emulsified asphalt by the radial distribution function, interaction energy, interfacial layer thickness, and solubility parameters of the emulsified asphalt system with different emulsifier contents. The results were validated by macro and micro tests including storage stability, particle size determination, and infrared spectroscopy. The results show that at low emulsifier contents, the emulsifier can reduce the interfacial tension between the oil–water interface and expand the transition region between the two phases (interfacial layer thickness), which will prevent interparticle agglomeration and reduce the emulsion particle size, thus reducing the settling rate and ensuring the stability of the emulsion. When the emulsifier content is further increased beyond the critical micelle concentration, the emulsifiers will agglomerate with each other and show larger peaks in the radial distribution function, and the phenomenon of emulsifier agglomeration will appear in the five-day storage stability test, resulting in a corresponding decrease in the proximity of the infrared absorption peak area ratio in the same wavelength band of the upper and lower layers of the biomass-emulsified asphalt, and the emulsion stability decreases instead.
1 April 2024 in Journal of Materials in Civil Engineering
Expansion joint failure is one of the main causes that lead to the damages of concrete pavement. The silicon dioxide/shape memory polyurethane (SiO2/SMPU) is a new kind of sealant which can use its shape memory performance to adapt to the width of the expansion joint with the change of pavement temperature, and it can effectively prolong the service life of the pavement and reduce maintenance costs. In this study, the effects of programming and the addition of SiO2 particles to the thermodynamic properties of the specimens were detected using differential scanning calorimetry (DSC), the optimal shape memory programming temperature of which is 72.9 °C. Combined with scanning electron microscopy (SEM) and shape memory effect test, the particles are evenly distributed between the two phases, and the shape fixation rate (Rf) of 98.15% and the shape recovery rate (Rr) of 97.31% show that the composite has a good shape memory effect. Fourier transform infrared spectroscopy (FTIR) and dynamic infrared dichroism illustrate the change of the hydrogen bond of soft and hard segments with the SiO2 particles in the shape memory cycle, revealing the optimal shape memory programming process. This study provides an insight into the reinforcement mechanism of SiO2 nanoparticles in SMPU matrix and verify whether it can meet the engineering requirements of expansion joints when used as a sealant of concrete pavement.
A new kind of modified emulsified bitumen used to plug a microcrack was studied. The sizes of high-temperature emulsified bitumen were fit for the sizes of the microcrack, which were approved by the scanning electron microscope and laser particle size analyzer. Some tests have been designed to demonstrate that the polymer could be used to promote the softening point of modified asphalt, and the high-temperature emulsified bitumen has also shown an excellent performance in terms of static filtration, the viscous coefficient, and extreme pressure lubrication, as well as to inhibit ting shale expansion. The permeability recovery could reach 88.26%, which meets the specification requirements. The mud cake, which was formed by high-temperature emulsified bitumen as an additive, was thin, tough, and dense, which was proved by the scanning electron microscope. The process used to obtain this additive was simple, and the performance of the plugging microfracture was excellent, so this kind of plugging agent could have a better application future.
The mechanical properties of the subgrade have a significant impact on the service life and pavement performance of the superstructure of pavement. By adding admixtures and via other means to strengthen the adhesion between soil particles, the strength and stiffness of the soil can be improved to ensure the long-term stability of pavement structures. In this study, a mixture of polymer particles and nanomaterials was used as a curing agent to examine the curing mechanism and mechanical properties of subgrade soil. Using microscopic experiments, the strengthening mechanism of solidified soil was analyzed with scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Fourier infrared spectroscopy (FTIR), and X-ray diffraction (XDR). The results showed that with the addition of the curing agent, small cementing substances on the surface of soil minerals filled the pores between minerals. At the same time, with an increase in the curing age, the colloidal particles in the soil increased, and some of them formed large aggregate structures that gradually covered the surface of the soil particles and minerals. By enhancing the cohesiveness and integrity between different particles, the overall structure of the soil became denser. Through pH tests, it was found that the age had a certain effect on the pH of solidified soil, but the effect was not obvious. Through the comparative analysis of elements in plain soil and solidified soil, it was found that no new chemical elements were produced in the solidified soil, indicating that the curing agent does not have negative impacts on the environment.