Recrystallization kinetics and two critical temperatures—the non-recrystallization temperature TNR and the static recrystallization critical temperature TSRCT—of five Nb, Ti, and V microalloyed steel grades are evaluated. The experimental examination is realized by employing isothermal double-hit compression tests and continuous hot torsion tests, both performed on a Gleeble® 3800 thermo-mechanical simulator. The experimental results are used for the critical assessment of predicted TNR using four empirical equations from the literature, and for the validation of simulated TNR and TSRCT. The thermokinetic computer simulations are realized using the mean-field microstructure modeling software MatCalc. Analysis shows that higher microalloying contents increase both critical temperatures, TNR and TSRCT, whereby the effect of recrystallization retardation of Nb is more pronounced than that of Ti or V. The most accurate reproduction of the experimental recrystallization behavior of the five examined steel grades is realized by the employed physics-based simulation approach.
A model is developed that describes the kinetics of precipitate transformations in the course of natural and artificial aging of Al alloys containing Mg and Si additions. In our approach, the disordered Mg–Si-rich clusters, which form during natural aging in the highly supersaturated Al matrix, can directly transform into the monoclinic Mg5Si6 (β″), without prior dissolution of the clusters and independent nucleation of β″ in the Al matrix. The transformation rate is evaluated with classical nucleation theory (CNT), assuming that the clusters represent an infinitely large matrix phase in which the β″ precipitates can nucleate. The adapted CNT model is described, and the basic features of the precipitate transformation are discussed in a parameter study. The model can also account for the observation that, during natural aging, the parent clusters occur in a variety of Mg to Si ratios, all of which have a characteristic probability of either transforming into the β″ phase or dissolving.
27 September 2023 in Modelling and Simulation in Materials Science and Engineering
The simulation of heat changes resulting from phase transitions can help to interpret differential scanning calorimetry (DSC) measurements, e.g. of metallic alloy systems in which multiple reactions overlap during non-isothermal heat treatments. So far, simulated DSC curves mostly exhibit sharp reaction peaks as commonly just one mean energy value for a certain type of nucleation site is assumed. This work proposes an efficient model for treating heterogeneous nucleation site energy variations within the framework of classical nucleation theory (CNT). The site energies are assumed to vary according to a Rayleigh distribution and a scaling function. The effect on the nucleation behavior of precipitates is studied. A consideration of the distribution of heterogeneous site energies has the potential to significantly smoothen the numerical treatment of precipitation processes compared to the non-distributed case. The comparison to previously published simulations of DSC curves during the cooling of an AA6005 aluminum alloy demonstrates the advantages of this extension, especially for slow cooling rates.