This study concerns the comparative investigation of two advanced lateral stability automotive controllers with respect to a commercial solution. The research aims to improve the stability performances achieved by a combined tracking of yaw rate and side-slip angle through the application of optimal efforts. The proposed solutions are based on Linear Quadratic Regulation and Sliding Mode Control, respectively. Both rely on the same approach for the control objective definition but differ from the action perspective. This solution involves the adoption of a differential braking actuation technique to deliver a desired yaw moment to the car body to track controlled states. Indeed, a sliding controller can also traction torques of hub-motor configurations as well as steering corrections, achieving vehicle stability and a driving response in accordance with the pilot’s intentions. Calibration and validation of the controllers are performed through a Hardware-in-the-Loop simulation rig, along with a real-time static simulator, performing different close-loop maneuvers to assess achievements in terms of lateral stability. Results show that both solutions ensure higher handling performances if compared to Non-controlled or Commercial-controlled vehicle scenarios.
29 November 2020 in International Journal of Fluid Power
Diffusion of electric and hybrid vehicles is accelerating the development of innovative braking technologies. Calibration of accurate models of a hydraulic brake plant involves availability of large amount of data whose acquisition is expensive and time consuming. Also, for some applications, such as vehicle simulators and hardware in the loop test rig, a real-time implementation is required. To avoid excessive computational loads, usage of simplified parametric models is almost mandatory. In this work, authors propose a simplified functional approach to identify and simulate the response of a generic hydraulic plant with a limited number of experimental tests. To reproduce complex nonlinear behaviours that are difficult to be reproduced with simplified models, piecewise transfer functions with scheduled poles are proposed. This innovative solution has been successfully applied for the identification of the brake plant of an existing vehicle, a Siemens prototype of instrumented vehicle called SimRod, demonstrating the feasibility of proposed method.
29 March 2022 in SAE International Journal of Advances and Current Practices in Mobility
Current ADAS systems can improve vehicle safety directly influencing its dynamics, reducing the impact of human error while driving. These functionalities have a high impact on the complexity of each unit installed on the car, potentially increasing the development time. In this work, a Hardware in the Loop testing bench and methodology for Autonomous Emergency Braking system is presented, aiming to enable a faster system development process. A commercial production brake by wire unit has been installed on a real-time driving simulator. The AEB functionality of the unit is activable in real-time during the simulation, by the means of a customizable control strategy. Two different AEB controllers have been implemented: the first one reproduces the unit stock functionality, while the second computes the requested deceleration using a PID control strategy. The two controllers have been tested in standardized EuroNCAP Car-to-Car Rear (CCR) collision scenario, implemented on the static simulator. The performances are then compared in terms of time to collision threshold necessary to avoid the impact, deceleration request and jerk, and vehicle-obstacle distance. The proposed methodology highlights the role of the static simulator as a development tool, allowing complete and immersive testing of both hardware and control strategies, greatly reducing the development time.