Soil moisture is an important variable in ecological, hydrological, and meteorological studies. An effective method for improving the accuracy of soil moisture retrieval is the mutual supplementation of multi-source data. The sensor configuration and band settings of different optical sensors lead to differences in band reflectivity in the inter-data, further resulting in the differences between vegetation indices. The combination of synthetic aperture radar (SAR) data with multi-source optical data has been widely used for soil moisture retrieval. However, the influence of vegetation indices derived from different sources of optical data on retrieval accuracy has not been comparatively analyzed thus far. Therefore, the suitability of vegetation parameters derived from different sources of optical data for accurate soil moisture retrieval requires further investigation. In this study, vegetation indices derived from GF-1, Landsat-8, and Sentinel-2 were compared. Based on Sentinel-1 SAR and three optical data, combined with the water cloud model (WCM) and the advanced integral equation model (AIEM), the accuracy of soil moisture retrieval was investigated. The results indicate that, Sentinel-2 data were more sensitive to vegetation characteristics and had a stronger capability for vegetation signal detection. The ranking of normalized difference vegetation index (NDVI) values from the three sensors was as follows: the largest was in Sentinel-2, followed by Landsat-8, and the value of GF-1 was the smallest. The normalized difference water index (NDWI) value of Landsat-8 was larger than that of Sentinel-2. With reference to the relative components in the WCM model, the contribution of vegetation scattering exceeded that of soil scattering within a vegetation index range of approximately 0.55–0.6 in NDVI-based models and all ranges in NDWI1-based models. The threshold value of NDWI2 for calculating vegetation water content (VWC) was approximately an NDVI value of 0.4–0.55. In the soil moisture retrieval, Sentinel-2 data achieved higher accuracy than data from the other sources and thus was more suitable for the study for combination with SAR in soil moisture retrieval. Furthermore, compared with NDVI, higher accuracy of soil moisture could be retrieved by using NDWI1 (R² = 0.623, RMSE = 4.73%). This study provides a reference for the selection of optical data for combination with SAR in soil moisture retrieval.

Spatial and temporal variations in the vertical stratification of the troposphere introduce significant propagation delays in interferometric synthetic aperture radar (InSAR) observations. Observations of small amplitude surface deformations and regional subsidence rates are plagued by tropospheric delays, and strongly correlated with topographic height variations. Phase-based tropospheric correction techniques assuming a linear relationship between interferometric phase and topography have been exploited and developed, with mixed success. Producing robust estimates of tropospheric phase delay however plays a critical role in increasing the accuracy of InSAR measurements. Meanwhile, few phase-based correction methods account for the spatially variable tropospheric delay over lager study regions. Here, we present a robust and multi-weighted approach to estimate the correlation between phase and topography that is relatively insensitive to confounding processes such as regional subsidence over larger regions as well as under varying tropospheric conditions. An expanded form of robust least squares is introduced to estimate the spatially variable correlation between phase and topography by splitting the interferograms into multiple blocks. Within each block, correlation is robustly estimated from the band-filtered phase and topography. Phase-elevation ratios are multiply- weighted and extrapolated to each persistent scatter (PS) pixel. We applied the proposed method to Envisat ASAR images over the Southern California area, USA, and found that our method mitigated the atmospheric noise better than the conventional phase-based method. The corrected ground surface deformation agreed better with those measured from GPS.

Quality assurance (QA) tests, such as integrity tests, are routinely conducted to ensure the safety of pile foundations. QA tests provide additional information and result in changes in estimated reliability of pile foundations. This paper aims to formalize a procedure to quantitatively evaluate the impact of routine QA tests on the reliability of pile foundations. Three cases of reliability analyses based on interface coring of large-diameter bored piles are studied; namely, no toe debris detected, toe debris detected without repair, and toe debris detected and repaired. The prior information of the occurrence probability and thickness of toe debris is established based on a practice survey and accumulated QA data. The Bayesian approach is then applied to update the occurrence probability and the mean toe debris thickness based on outcomes of on-site QA tests and remedial actions taken after these QA tests. Subsequently, the reliability of the piles can be updated. The updated reliability can be signific...

In real estate valuation using the Hedonic Price Model (HPM) estimated via Ordinary Least Squares (OLS) regression, subjectivity and measurement errors in the independent variables violate the Gauss–Markov theorem assumption of a non-random coefficient matrix, leading to biased parameter estimates and incorrect precision assessments. In this contribution, the Errors-in-Variables model equipped with Total Least Squares (TLS) estimation is proposed to address these issues. It fully considers random errors in both dependent and independent variables. An iterative algorithm is provided, and posterior accuracy estimates are provided to validate its effectiveness. Monte Carlo simulations demonstrate that TLS provides more accurate solutions than OLS, significantly improving the root mean square error by over 70%. Empirical experiments on datasets from Boston and Wuhan further confirm the superior performance of TLS, which consistently yields a higher coefficient of determination and a lower posterior variance factor, which shows its more substantial explanatory power for the data. Moreover, TLS shows comparable or slightly superior performance in terms of prediction accuracy. These results make it a compelling and practical method to enhance the HPM.

Accurate road extraction from remote sensing images is of great importance, yet the complex backgrounds, significant scale differences, and detailed characteristics of road information pose a tremendous challenge to the semantic modeling capabilities of deep learning methods. Recent studies have shown impressive success with diffusion-based methods in semantic segmentation. However, when applied to road extraction tasks, the remarkable performance can be diminished by intricate terrains and unreasonable feature fusion. In this article, we reframe road extraction as a mask-generating task, progressively refining road mask predictions through a timestep-by-timestep denoising process. Specifically, we propose a novel adaptive frequency-aware latent diffusion framework named AFLDiff. The pretrained VQ-VAE encoder with coupled perceptual compression suppresses semantic features that are weakly associated with roads in remote sensing images, reconstructing the image into a low-dimensional latent space for training. The adaptive frequency-aware module filters out redundant noise from the noisy features and enhances useful high- and low-frequency components, bridging the gap between noisy and semantic features for better fusion. Extensive experimental results demonstrate that our method achieves state-of-the-art (SOTA) performance on the DeepGlobe, Massachusetts, and CHN6-CUG datasets, with cross-dataset validation further confirming its robustness and generalization capabilities.

This paper explores the problem of symmetric transformation in the presence of outliers for photogrammetric and remote-sensing applications. We propose a point-wise robust objective for symmetric coordinate transformation by assuming the corresponding structure of the down-weighting matrix and choosing the squared Mahalanobis distance as the statistic to evaluate the down-weighting factors. Compared to the previous work, our method regards all the coordinates of one point as a whole. It is practical in principle since the displacement and correspondence relation are point-wise; it is statistically rigorous since the stochasticity of both frames is considered; it is flexible since the incorporated constraints enable all kinds of transformation. By utilizing the parameter partition technique, a more intelligent iteration manner is proposed for the implementation aspect, which specially suits globally distributed geoscience data. The developed method is vetted in the synthetic and real examples including geodetic datum conversion and point cloud registration. The algorithms have potential in many areas, including cross-source registration, image analysis, pattern recognition, surface modeling and remote-sensing image registration.