In an ever expanding railway network all around the world, the need for track maintenance grows steadily. Traditionally, one major part of track maintenance is ramming large vibrating steel picks into the gravel between and under railway sleepers to compress the gravel and generate a safe substructure. Even today, maintenance personnel still have to manually locate the sleepers if they cannot be detected by computer vision systems or visually by the operator. Here we developed a first of its kind magnetic sleeper detector, even able to find sleepers, buried in gravel, undetectable by vision based systems. Our approach of magnetic detection is based on a DC magnetic field excitation and a detector moving with respect to the rail system, including the sleepers and fasteners for mounting the rails. Due to railway application constraints a large air gap between the sensor and the sleeper structure is required, which significantly complicates the magnetic sensing task for robust sleeper detection. The design and optimization of the magnetic circuit was based on extensive 3D simulation studies to ensure highest possible variation in magnetic flux density at the sensor locations for absence and presence of a sleeper. Furthermore, a low noise and high sensitivity electronic circuit has been realized to cope with sensor signal offsets from unknown or changing sensor orientations with respect to the earth’s magnetic field, or magnetic interferences from other trains potentially passing by during active measurements. Since we only want to detect sleepers in close vicinity of the moving sensor system, digital signal processing of the acquired signals can easily compensate for disturbing slowly changing or static field components within real world application scenarios. We demonstrate that magnetic detection of even buried sleepers on railway tracks is possible for distances of up to 172 mm between the sensor and the sleeper. This enables an even higher level of railway maintenance automation previously impossible in certain scenarios.
10 January 2007 in Journal of Materials Processing Technology
Zusammenfassung: Fasern, sowohl Naturfasern als auch technische Fasern finden ihren Einsatz in vielen technischen Anwendungen. Es folgt daher die Notwendigkeit die Fasern zu charakterisieren. Die Charakterisierung umfasst in der Regel auch die Bestimmung des Spannungs-Dehnungs-Diagramms von einzelnen Fasern. Dieser Artikel beschäftigt sich mit einem Messsystem welches zur Messung des Spannungs-Dehnungs-Diagramms, auch unter erschwerten Testbedingungen, wie z. B. die Messung bei hohen und höchsten Temperaturen, geeignet ist. Es erfolgt neben der Präsentation des Messsystems ebenfalls eine Diskussion der optimierten Signalverarbeitung. Betrachtet werden anschließend Ergebnisse der Translation der Oberfläche eines menschlichen Haares, montiert auf einer Linearachse. Aus diesen Verschiebungen lässt sich dann, im Falle der Bestimmung des Spannungs-Dehnungs-Diagramms, die technische Dehnung ableiten. Es wird ein auf einer 4f− Optik basierender Aufbau verwendet. Für diesen erweist sich das Schätzen der Verschiebungen weit unter der Wellenlänge auf Basis des Kreuzleistungsdichtespektrum – unter den untersuchten Methoden – als am zuverlässigsten. Abschließend werden potentielle zukünftige Optimierungen des Gesamtsystems angerissen.
Ultrasound is a mechanical wave propagating in tissue which is influenced in its propagation behavior by the locally prevailing acousto-mechanical conditions. By suitable processing of the back-scattered signals received by the ultrasound transducer, tissue parameters such as local bulk modulus, mass density, speed of sound, isotropic scattering coefficient, and also the locally acting tissue absorption can be inferred. A discipline that has received increasing attention in the medical ultrasonic imaging discipline and its scientific publications in recent years is quantitative ultrasound (QUS) which tries to estimate with great accuracy these local acting tissue parameters. In this paper we analyze different algorithms for estimation of high spatial resolution tissue absorption parameters. On the one hand, there is a simple absorption estimator based on the evaluation of the quotient of the power density spectra calculated for different depth regions (spectral-log-difference estimator), which, however, assumes a linearly with frequency increasing absorption, this is contrasted with an estimator which also allows to estimate a polynomial increase of the absorption with frequency (method-of-moments estimator). Since a closed-form solution cannot be given for this, a maximum-likelihood estimator for which there is always an estimate that can be computed numerically efficiently is developed. The results, tissue attenuation, are presented as a color-coded overlay on conventional B-mode ultrasound images showing only morphology.