This review provides a comprehensive analysis of natural fibers, addressing their classification, chemical composition, extraction methods, treatments, and diverse applications. It categorizes natural fibers into plant-based (cellulose-rich), animal-based (protein-based), and mineral-based types, detailing their unique structural and chemical properties. The paper examines traditional and advanced extraction techniques—including dew, water, enzymatic, chemical retting, and mechanical decortication—highlighting their impact on fiber quality and environmental sustainability. Furthermore, it reviews various chemical and biopolymer treatments designed to enhance fiber performance, reduce hydrophilicity, and improve adhesion in composite materials. The discussion extends to the multifaceted applications of natural fibers across industries such as textiles, automotive, construction, and packaging, underscoring their role in reducing reliance on synthetic materials and promoting eco-friendly innovations. The review synthesizes recent market trends and emerging fiber classifications, emphasizing the potential of natural fibers to drive sustainable development and informing future research in extraction efficiency, treatment optimization, and lifecycle analysis.

Natural based-cellulosic fibers are trending due to the global awareness regarding environmental health and because their properties make them a great alternative to the synthetic fibers. However, these fibers also have some hindrances that can be solved with their functionalization. The present study concerns modification of the surface of natural based-cellulosic fibers extracted from stems of the ginger lily plant (Hedychium gardnerianum) with TiO₂ films deposited by DC magnetron sputtering using a titanium (Ti) target. A detailed characterization of the TiO₂-coated fibers was investigated by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The results revealed that the sputtered TiO₂ films can be attached to the ginger lily fibers mainly by their OH groups. XPS analysis further shows that C–OH group is not dominant, which means that no pure cellulose is present at the surface.

TiO₂ thin films were deposited on ginger lily (Hedychium gardnerianum) fibers using a custom-made DC reactive magnetron sputtering system with Ar/O₂ mixture at two O₂/(O₂ + Ar) ratios (50% O₂ and 75% O₂) and sputtering powers (500 and 1000 W), and their effects on the structure and surface morphology of TiO₂ films were investigated. XRD analysis showed the presence of the mainly anatase phase in the deposited films, with a small fraction of rutile phase detected for TiO₂ deposited with the higher oxygen percentage and sputtering power. SEM imaging revealed that the films exhibited distinct surface features depending on the deposition conditions. Specifically, films deposited with 50 O₂ % and 1000 W exhibited porosity, while the films deposited under other conditions appeared either dense with a cauliflower-like appearance or displayed surface features resembling lines and mountain ranges of coalesced particles. The grain size of dense films increased with increasing sputtering power. The deposition conditions significantly affected the resulting surface topography, with an increase in surface roughness parameters observed for both power levels when the oxygen concentration in the deposition atmosphere was increased from 50% to 75%. The adhesion tests conducted using sonication and EDS analysis revealed that almost all of the studied films exhibited good adhesion, as evidenced by the atomic content (at. %) of Ti remaining intact after sonication, indicating good adhesion. However, the porous film exhibited a slightly lower adhesion grade, suggesting that the porous structure may have influenced the adhesion properties.

This study investigates the rheological behavior of cellulose microfiber suspensions derived from kahili ginger stems (Hedychium gardnerianum), an invasive species, in two adhesive matrices: a commercial water-based adhesive (Coplaseal^®) and a casein-based adhesive made from non-food-grade milk, referred to as K and S samples, respectively. Rheological analyses were performed using oscillatory and rotational shear tests conducted at 25 °C, 50 °C, and 75 °C to assess the materials’ viscoelastic properties more comprehensively. Oscillatory tests across a frequency range of 1–100 rad/s assessed the storage modulus (G′) and loss modulus (G″), while rotational shear tests evaluated apparent viscosity and shear stress across shear rates from 0.1 to 1000 s⁻¹. Fiber-free samples consistently showed lower moduli than fiber-containing samples at all frequencies. The incorporation of fibers increased the dynamic moduli in both K and S samples, with a quasi-plateau observed at lower frequencies, suggesting solid-like behavior. This trend was consistent in all tested temperatures. As frequencies increased, the fiber network was disrupted, transitioning the samples to fluid-like behavior, with a marked increase in G′ and G″. This transition was more pronounced in K samples, especially above 10 rad/s at 25 °C and 50 °C, but less evident at 75 °C. This shift from solid-like to fluid-like behavior reflects the transition from percolation effects at low frequencies to matrix-dominated responses at high frequencies. In contrast, S samples displayed a wider frequency range for the quasi-plateau, with less pronounced moduli changes at higher frequencies. At 75 °C, the moduli of fiber-containing and fiber-free S samples nearly converged at higher frequencies, indicating similar effects of the fiber and matrix components. Both fiber-reinforced and non-reinforced suspensions exhibited pseudoplastic (shear-thinning) behavior. Fiber-containing samples exhibited higher initial viscosity, with K samples displaying greater differences between fiber-reinforced and non-reinforced systems compared to S samples, where the gap was narrower. Interestingly, S samples exhibited overall higher viscosity than K samples, implying a reduced influence of fibers on the viscosity in the S matrix. This preliminary study highlights the complex interactions between cellulosic fiber networks, adhesive matrices, and rheological conditions. The findings provide a foundation for optimizing the development of sustainable biocomposites, particularly in applications requiring precise tuning of rheological properties.

The morphology of solid surfaces encodes fundamental information about the physical mechanisms that govern their formation. Here, we reinterpret scanning electron microscopy (SEM) micrographs of oxide thin films as two-dimensional self-affine morphology fields (not height-metrology) and analyze them using a multiscale statistical-physics framework that integrates spectral, multifractal, geometric, and topological descriptors. Fourier-based power spectral density (PSD) provides the spectral slope $\beta$ and apparent Hurst exponent $H$, while multifractal scaling yields the information dimensions $D_q$, the singularity spectrum $f\left(\alpha \right)$, and its width $\mathsf{\Delta }\alpha$, which quantify scale hierarchy and intermittency. Lacunarity captures intermediate-scale heterogeneity, and Minkowski functionals—especially the Euler characteristic $\chi \left(\theta \right)$—probe connectivity and identify the onset of a percolation-like network structure. Two representative surfaces with contrasting morphologies are used as model systems: one exhibiting an anisotropic, porous, strongly multifractal structure with fragmented domains; the other showing a compact, nearly isotropic, and nearly monofractal organization. The porous surface/topography displays steep PSD decay, broad multifractal spectra, and positive $\chi$, consistent with a sub-percolated, diffusion-limited, Edwards–Wilkinson-like (EW-like) growth regime. Conversely, the compact surface/topography exhibits gentler spectral slopes, narrower $f\left(\alpha \right)$, enhanced lacunarity at intermediate scales, and a $\chi \left(\theta \right)$ zero-crossing indicative of a connectivity transition where a surface becomes a percolating network, consistent with a Kardar–Parisi–Zhang-like (KPZ-like) correlated growth regime. These results demonstrate that individual SEM micrographs encode quantitative fingerprints of nonequilibrium universality classes and topology-driven transitions from fragmented surfaces to connected networks, showing that SEM intensity maps can serve as a quantitative probe for testing theories of rough surfaces and kinetic growth in experimental thin-film systems.

This study examines the effect of oxygen concentration and sputtering power on the surface morphology of TiO₂ thin films deposited by DC reactive magnetron sputtering. Surface roughness parameters were obtained using MountainsMap^® software(10.2) from SEM images, while fractal dimensions and texture descriptors were extracted via Python-based image processing. Fractal dimension was calculated using the box-counting method applied to binarized images with multiple threshold levels, and texture analysis employed Gray-Level Co-occurrence Matrix (GLCM) statistics to capture local anisotropies and spatial heterogeneity. Four samples were analyzed, previously prepared with oxygen concentrations of 50% and 75%, and sputtering powers of 500 W and 1000 W. The results have shown that films deposited at higher oxygen levels and sputtering powers exhibited increased roughness, higher fractal dimensions, and stronger GLCM contrast, indicating more complex and heterogeneous surface structures. Conversely, films produced at lower oxygen and power settings showed smoother, more isotropic surfaces with lower complexity. This integrated analysis framework links deposition parameters with morphological characteristics, enhancing the understanding of surface evolution and enabling better control of TiO₂ thin film properties.