The International Roadmap for Devices and Systems (IRDS) predicts the integration of 2D materials into high-volume manufacturing as channel materials within the next decade, primarily in ultra-scaled and low-power devices.
1 April 2022 in Journal of Micro/Nanopatterning, Materials, and Metrology
The semiconductor industry has been built upon scaling innovations for generations of complementary metal-oxide semiconductor (CMOS) logic technology nodes, following the widely known Moore’s law. Each successively smaller node has been challenging the limits of what research and manufacturing can jointly accomplish and faced increasing skepticism about its success. The scaling paradigm aims to fit as many transistor elements in a region as possible, shrinking the lateral dimensions to achieve increasingly smaller features. Recent logic technologies’ success has been reached through many clever processing innovations, design technology co-optimization, and the maturity of extreme ultraviolet (EUV) lithography for production-scale throughput and stability.1 While the technical accomplishments are demonstratively better than prior nodes, so too were the financial investments higher, time to manufacture longer, and engineering development larger than ever before.2
19 April 2022 in IEEE Transactions on Semiconductor Manufacturing
Methodologies for characterization of the lateral indentation of silicon-germanium (SiGe) nanosheets using different non-destructive and in-line compatible metrology techniques are presented and discussed. Gate-all-around nanosheet device structures with a total of three sacrificial SiGe sheets were fabricated and different etch process conditions used to induce indent depth variations. Scatterometry with spectral interferometry and x-ray fluorescence in conjunction with advanced interpretation and machine learning algorithms were used to quantify the SiGe indentation. Solutions for two approaches, average indent (represented by a single parameter) as well as sheet-specific indent, are presented. Both scatterometry with spectral interferometry as well as x-ray fluorescence measurements are suitable techniques to quantify the average indent through a single parameter. Furthermore, machine learning algorithms enable a fast solution path by combining x-ray fluorescence difference data with scatterometry spectra, therefore avoiding the need for a full optical model solution. A similar machine learning model approach can be employed for sheet-specific indent monitoring; however, reference data from cross-section transmission electron microscopy image analyses are required for training. It was found that scatterometry with spectral interferometry spectra and a traditional optical model in combination with advanced algorithms can achieve a very good match to sheet-specific reference data.
21 February 2023 in Journal of Micro/Nanopatterning, Materials, and Metrology
A spectral interferometry technique called vertical travelling scatterometry (VTS) is introduced, demonstrated, and discussed. VTS utilizes unique information from spectral interferometry and enables solutions for applications that are infeasible with traditional scatterometry approaches. The technique allows for data filtering related to spectral information from buried layers, which can then be ignored in the optical model. Therefore, using VTS, selective analyses of the topmost part of an arbitrarily complex stack are possible within a single metrology step. This methodology helps to overcome geometrical complexities and allows for focusing on parameters of interest through dramatically simplified optical modeling. Such model simplifications are specifically desired for back-end-of-line applications. Three examples are monitored discussed: (i) the critical dimensions (CDs) of a first metal level on top of nanosheet gate-all-around transistor structures, (ii) the thickness of an interlayer dielectric above embedded memory in the active area, and (iii) the CDs of trenches on top of tall stacks in the micrometer range comprising many layered dielectrics. It was found that, in all three cases, data filtering through VTS allowed for a simple optical model capable of delivering parameters of interest. The validity and accuracy of the VTS solution results were confirmed by extensive reference metrology obtained by traditional scatterometry, scanning electron microscopy, and transmission electron microscopy. Furthermore, it was shown that machine learning models trained with VTS filtered data can converge to a robust solution with a smaller dataset compared with models training with traditional scatterometry data.
27 January 2022 in Journal of Micro/Nanopatterning, Materials, and Metrology
Nanosheet gate-all-around (GAA) field effect-transistors (FETs) will be the next-generation device architecture replacing finFET technology either next year or in 2023.1 The new transistor type is an evolutionary step from finFETs with better performance due to superior electrostatics and short channel control, for example.2 A nanosheet GAAFET may be viewed, in a simplistic manner, as a finFET rotated on its side, where the fin is now a horizontal nanosheet with a gate wrapped around the entire perimeter. Typically, the device comprises three or more vertically stacked individual horizontal nanosheets, which serve as channels. This is accomplished by first growing alternating pseudomorphic and Si layers on a Si substrate. Here, a perfect crystal quality is critical to achieve defect free, biaxially strained , and strain-free Si single crystalline layers. This multilayer stack is then patterned in both in-plane orientations to define channel length and width. Usually, the sheets are sacrificial and removed soon after source/drain epitaxy leaving the Si sheets as transport channels.2 To pursue optimum transistor performance, it is desirable to increase charge carrier mobility through tensile and compressive strain for nFET and pFET, respectively. The electron mobility in GAA nFET Si channels is intrinsically higher than that of finFETs due to the sheet orientation and some residual tensile strain after patterning. However, the advantages for nFET negatively impact the pFET hole mobility. Additionally, as the transistor volume shrinks due to aggressive pitch scaling and three-dimensional stacking, traditional external channels stressors are often not very effective. In addition, integration schemes of horizontal nanosheets wrapped with high-k/metal gate materials create many unconstrained free surfaces throughout the patterning process, leading to natural relaxation. Overcoming these challenges requires either complex and costly manufacturing schemes or innovative strain engineering approaches.3,4
1 September 2024 in Journal of Vacuum Science & Technology A
We investigate the time evolution of ZnO thin film growth in oxygen plasma-enhanced atomic layer deposition using in situ spectroscopic ellipsometry. The recently proposed dynamic-dual-box-model approach [Kilic et al., Sci. Rep. 10, 10392 (2020)] is used to analyze the spectroscopic data post-growth. With the help of this model, we explore the in-cycle surface modifications and reveal the repetitive layer-by-layer growth and surface roughness modification mechanisms during the ZnO ultrathin film deposition. The in situ complex-valued dielectric function of the amorphous ZnO thin film is also determined from the model analysis for photon energies of 1.7–4 eV. The dielectric function is analyzed using a critical point model approach providing parameters for bandgap energy, amplitude, and broadening in addition to the index of refraction and extinction coefficient. The dynamic-dual-box-model analysis reveals the initial nucleation phase where the surface roughness changes due to nucleation and island growth prior to film coalescence, which then lead to the surface conformal layer-by-layer growth with constant surface roughness. The thickness evolution is resolved with Angstrom-scale resolution vs time. We propose this method for fast development of growth recipes from real-time in situ data analysis. We also present and discuss results from x-ray diffraction, x-ray photoelectron spectroscopy, and atomic force microscopy to examine crystallographic, chemical, and morphological characteristics of the ZnO film.