19 April 2022 in IEEE Transactions on Semiconductor Manufacturing
Methodologies for characterization of the lateral indentation of silicon-germanium (SiGe) nanosheets using different non-destructive and in-line compatible metrology techniques are presented and discussed. Gate-all-around nanosheet device structures with a total of three sacrificial SiGe sheets were fabricated and different etch process conditions used to induce indent depth variations. Scatterometry with spectral interferometry and x-ray fluorescence in conjunction with advanced interpretation and machine learning algorithms were used to quantify the SiGe indentation. Solutions for two approaches, average indent (represented by a single parameter) as well as sheet-specific indent, are presented. Both scatterometry with spectral interferometry as well as x-ray fluorescence measurements are suitable techniques to quantify the average indent through a single parameter. Furthermore, machine learning algorithms enable a fast solution path by combining x-ray fluorescence difference data with scatterometry spectra, therefore avoiding the need for a full optical model solution. A similar machine learning model approach can be employed for sheet-specific indent monitoring; however, reference data from cross-section transmission electron microscopy image analyses are required for training. It was found that scatterometry with spectral interferometry spectra and a traditional optical model in combination with advanced algorithms can achieve a very good match to sheet-specific reference data.
7 October 2019 in IEEE Transactions on Semiconductor Manufacturing
The changes in tungsten (W) film growth and resistance are studied using different titanium nitride (TiN) and tantalum nitride (TaN) underlayer films. The underlayers are analyzed by surface characterization techniques to obtain the differences in surface morphology and grain sizes that influence the growth of W on these films. Different precursors and processes used for TiN deposition affect the W growth and film properties. It is important to monitor the changes in incoming TiN resistance as a part of the W process qualification. This enables maintaining W process stability and reducing fab downtime due to false fails.
1 February 2026 in ECS Journal of Solid State Science and Technology
A novel tungsten (W) chemical vapor deposition and etch process was developed for improved W gapfill in via structures. While conventional conformal W deposition processes typically lead to void or seam formation, mostly resulting from excessive W surface roughness generated by a large W grain size, this new process provides a pathway towards eliminating voids and creating seamless W gapfill. A TaN/Ti/TiN metal liner stack and a thin conformal W layer were deposited into via features with an approximate width of 40 nm, and subsequently a W etch process was developed to allow modification of the shape and profile of the deposited W layer. Under certain W etch process conditions a tapered W layer was thus formed, which acted as a starting surface for an additional conformal W deposition process. Structural analysis by transmission electron microscopy revealed void-free W gapfill as a result of this sequential W deposition/W etch/W deposition process.