In this research, chitosan–magnetite composites (CS-MNPs) were successfully synthesized using a rapid and easy technique. The materials were characterized by FTIR, XRD, EDX, TEM, VSM, and BET methods. The removal of the antibiotics ciprofloxacin (CFX) and levofloxacin (LFX) from aqueous solutions by CS-MNPs adsorbent was investigated. The influencing factors in a single adsorption system were studied, including pH (1–11), initial concentration (2.5–15.0 mg/L), contact time (0–120 min), and adsorbent dosage (5–50 mg/L). The experiment data were analyzed by pseudo-first-order and pseudo-second-order kinetic models. The adsorption isotherms were studied by fitting the experimental data to the Langmuir, Freundlich, and Temkin models. The results indicated that the adsorption of CFX and LFX antibiotics was consistent with the pseudo-second-order kinetics model, the Langmuir isotherm model. Binary adsorption systems (CFX: LFX) with concentration ratios of 1:0, 1:0.5, 1:1.0, 1:1.5, and 1:2.0 were also studied. The antibiotics CFX and LFX were absorbed by CS-MNPs simultaneously in the aqueous solution. The presence of the second component in the solution reduced the first component’s ability to adsorb. The adsorption process in the binary system followed the Langmuir competition model. After four regenerations, CS-MNPS exhibited stability and was well reusable. Studies on actual samples showed that CS-MNPs could effectively remove FQs from those samples, with a treatment efficiency of above 98%.

The recovery of metals from discarded mobile phones has been of interest due to its environmental and economic benefits. This work presents a simple and effective approach for leaching copper (Cu) from the printed circuit boards of discarded mobile phones by combining ultrasound and ozone approaches. The X-ray diffraction (XRD) technique and Fourier-transform infrared spectroscopy (FT-IR) were used to characterize the solid phases, and inductively coupled plasma optical emission spectrometry (ICP-OES) was utilized to determine the concentration of metals in the liquid phases. The effects of several influential parameters, including ultrasound, ozone dose, HCl concentration, liquid/solid ratio, temperature, and reaction time on the leaching efficiency were investigated. The results showed that the optimal conditions for Cu leaching included an ozone dose of 700 mg/h, HCl concentration of 3.0 M, liquid/solid ratio of 8, and temperature of 333 K. Under optimal conditions, about 99% of Cu was leached after 180 min. The shrinking core model was used to analyze the kinetics of the Cu leaching process, and the results showed that the surface chemical reaction governs this process. The activation energy of the leaching reaction, calculated using Two-Point form of the Arrhenius equation, was 10.852 kJ mol⁻¹.