The utilization of lithium–sulfur battery is hindered by various challenges, including the “shuttle effect”, limited sulfur utilization, and the sluggish conversion kinetics of lithium polysulfides (LiPSs). In the present work, a theoretical design for the viability of graphitic carbon nitride (g-C3N4) and phosphorus-doping graphitic carbon nitride substrates (P-g-C3N4) as promising host materials in a Li-S battery was conducted utilizing first-principles calculations. The PDOS shows that when the P atom is introduced, the 2p of the N atom is affected by the 2p orbital of the P atom, which increases the energy band of phosphorus-doping substrates. The energy bands of PC and Pi are 0.12 eV and 0.20 eV, respectively. When the lithium polysulfides are adsorbed on four substrates, the overall adsorption energy of PC is 48–77% higher than that of graphitic carbon nitride, in which the charge transfer of long-chain lithium polysulfides increase by more than 1.5-fold. It is found that there are powerful Li-N bonds between lithium polysulfides and P-g-C3N4 substrates. Compared with the graphitic carbon nitride monolayer, the anchoring effect of the LiPSs@P-g-C3N4 substrate is enhanced, which is beneficial for inhibiting the shuttle of high-order lithium polysulfides. Furthermore, the catalytic performance of the P-g-C3N4 substrate is assessed in terms of the S8 reduction pathway and the decomposition of Li2S; the decomposition energy barrier of the P-g-C3N4 substrate decrease by 10% to 18%. The calculated results show that P-g-C3N4 can promote the reduction of S8 molecules and Li-S bond cleavage within Li2S, thus improving the utilization of sulfur-active substances and the ability of rapid reaction kinetics. Therefore, the P-g-C3N4 substrates are a promising high-performance lithium-sulfur battery anchoring material.
The study of pore structure regulation methods has always been a central focus in enhancing the capacitance performance of porous carbon electrodes in lithium-ion capacitors (LICs). This study proposes a novel approach for the synergistic regulation of the pore structure in porous carbon using phenol-formaldehyde (PF) resin and boric acid (BA). PF and BA are initially dissolved and adsorbed onto porous carbon, followed by hydrothermal treatment and subsequent heat treatment in a N2 atmosphere to obtain the porous carbon materials. The results reveal that adding BA alone has almost no influence on the pore structure, whereas adding PF alone significantly increases the micropores. Furthermore, the simultaneous addition of PF and BA demonstrates a clear synergistic effect. The CO2 and H2O released during the PF pyrolysis contribute to the development of ultramicropores. At the same time, BA facilitates the N2 activation reaction of carbon, enlarging the small mesopores and aiding their transformation into bottlenecked structures. The resulting porous carbon demonstrates an impressive capacitance of 144 F·g−1 at 1 A·g−1 and a capacity retention of 19.44% at 20 A·g−1. This mechanism of B-catalyzed N2-enhanced mesopore formation provides a new avenue for preparing porous carbon materials. This type of porous carbon exhibits promising potential for applications in Li-S battery cathode materials and as catalyst supports.
Supercapacitors have a wide range of applications in high-technology fields. The desolvation of organic electrolyte cations affects the capacity size and conductivity of supercapacitors. However, few relevant studies have been published in this field. In this experiment, the adsorption behavior of porous carbon was simulated with first-principles calculations using a graphene bilayer with a layer spacing of 4–10 Å as a hydroxyl-flat pore model. The reaction energies of quaternary ammonium cations, acetonitrile, and quaternary ammonium cationic complexes were calculated in a graphene bilayer with different interlayer spacings, and the desolvation behavior of TEA+ and SBP+ ions was described. The critical size for the complete desolvation of [TEA(AN)]+ was 4.7 Å, and the partial desolvation size ranged from 4.7 to 4.8 Å. The critical size for the complete desolvation of [SBP(AN)]+ was 5.2 Å, and the partial desolvation size ranged from 5.2 to 5.5 Å. As the ionic radius of the quaternary ammonium cation decreased, the desolvation size showed a positive trend. A density of states (DOS) analysis of the desolvated quaternary ammonium cations embedded in the hydroxyl-flat pore structure showed that the conductivity of the hydroxyl-flat pore was enhanced after gaining electrons. The results of this paper provide some help in selecting organic electrolytes to improve the capacity and conductivity of supercapacitors.
Supercapacitors have many applications in new energy and other high-tech fields. The desolvation effect on ions affects the capacity size of supercapacitors, and there are few relevant studies published in this field at present. In this experiment, bilayer graphene (BG) with a layer spacing of 4–10 Å was used as a model of flat pores and was calculated with first-principles calculations, which can effectively simulate the adsorption behaviour of porous carbon. The reaction energies of ions, propylene carbonate, and ionic complexes in bilayer graphene with different layer spacings were calculated, and the desolvation behaviour of lithium salt cations (Li+), tetraethyl quaternary ammonium salt cations (TEA+), triethyl methyl quaternary ammonium salt cations (TEMA+), and bipyrrolidinium quaternary ammonium salt cations (SBP+) was investigated. The calculation was based on density functional compact bound (DFTB+) software. The calculated results show that in the stacked system, the complete desolvation size of the TEA+ reaches 5.6 Å, the complete desolvation size of the TEMA+ reaches 4.9 Å, the complete desolvation size of the SBP+ reaches 4.8 Å, and the complete desolvation size of the Li+ reaches 5.4 Å, with the organic electrolyte cations showing a positive trend in the complete desolvation size as the ion radius increases. An in-depth analysis of the data shows that Li+, TEA+, TEMA+, and SBP+ ion radii play a dominant role in the size of desolvation. The results of this paper provide an effective aid for the selection of organic electrolytes to increase the capacity of supercapacitors.