We present a data-driven method for the early detection of thermoacoustic instabilities. Recurrence quantification analysis is used to calculate characteristic combustion features from short-length time series of dynamic pressure sensor data. Features like recurrence rate are used to train support vector machines to detect the onset of instability a few hundred milliseconds in advance. The performance of the proposed method is investigated on experimental data from a representative LOX/H${}_2$ research thrust chamber. In most cases, the method is able to timely predict two types of thermoacoustic instabilities on test data not used for training. The results are compared with state-of-the-art early warning indicators.

Traditional spacecraft attitude control often relies heavily on the dimension and mass information of the spacecraft. In active debris removal scenarios, these characteristics cannot be known beforehand because the debris can take any shape or mass. Additionally, it is not possible to measure the mass of the combined system of satellite and debris object in orbit. Therefore, it is crucial to develop an adaptive satellite attitude control that can extract mass information about the satellite system from other measurements. The authors propose using deep reinforcement learning (DRL) algorithms, employing stacked observations to handle widely varying masses. The satellite is simulated in Basilisk software, and the control performance is assessed using Monte Carlo simulations. The results demonstrate the benefits of DRL with stacked observations compared to a classical proportional–integral–derivative (PID) controller for the spacecraft attitude control. The algorithm is able to adapt, especially in scenarios with changing physical properties.

Accurate calculations of the heat transfer and the resulting maximum wall temperature are essential for the optimal design of reliable and efficient regenerative cooling systems. However, predicting the heat transfer of supercritical methane flowing in cooling channels of a regeneratively cooled rocket combustor presents a significant challenge. High-fidelity CFD calculations provide sufficient accuracy but are computationally too expensive to be used within elaborate design optimization routines. In a previous work it has been shown that a surrogate model based on neural networks is able to predict the maximum wall temperature along straight cooling channels with convincing precision when trained with data from CFD simulations for simple cooling channel segments. In this paper, the methodology is extended to cooling channels with curvature. The predictions of the extended model are tested against CFD simulations with different boundary conditions for the representative LUMEN combustor contour with varying geometries and heat flux densities. The high accuracy of the extended model’s predictions, suggests that it will be a valuable tool for designing and analyzing regenerative cooling systems with greater efficiency and effectiveness.

Traditional experimental design methods often face challenges in handling complex aerospace systems due to the high dimensionality and nonlinear behavior of such systems, resulting in nonoptimal experimental designs. To address these challenges, machine learning techniques can be used to further increase the application areas of modern Bayesian Optimal Experimental Design (BOED) approaches, enhancing their efficiency and accuracy. The proposed method leverages neural networks as surrogate models to approximate the underlying physical processes, thereby reducing computational costs and allowing for full differentiability. Additionally, the use of reinforcement learning enables the optimization of sequential designs and essential real-time capability. Our framework is validated by optimizing experimental designs that are used for the efficient characterization of turbopumps for liquid propellant rocket engines. The reinforcement learning approach yields superior results in terms of the expected information gain related to a sequence of 15 experiments, exhibiting mean performance increases of 9.07% compared to random designs and 6.47% compared to state-of-the-art approaches. Therefore, the results demonstrate significant improvements in experimental efficiency and accuracy compared to conventional methods. This work provides a robust framework for the application of advanced BOED methods in aerospace testing, with implications for broader engineering applications.