This work addresses the nature of supercritical hydrogen-oxygen flame coupling to acoustics through visualization under conditions representative of upper-stage rocket engines. A research thrust chamber that shows self-excited combustion instabilities for certain operating conditions was used. Previous analysis proved that the instabilities are connected to injector acoustics. In this study a small optical access window was mounted in the chamber wall. High-speed flame radiation imaging of UV and blue wavelengths has been applied in order to analyze the acoustic-flame interaction of one of the 42 flames. Dynamic mode decomposition results for a case with 80-bar chamber pressure showed that the flame dynamics are strongly influenced by the LOX injector acoustics, whereas for a 50-bar chamber pressure load point no flame response to injector acoustics was observed. A potential source of acoustic excitation in the oxygen injectors based on hydrodynamic effects is consistent with the observations from the two load points.
1 June 2021 in Chaos: An Interdisciplinary Journal of Nonlinear Science
We present a data-driven method for the early detection of thermoacoustic instabilities. Recurrence quantification analysis is used to calculate characteristic combustion features from short-length time series of dynamic pressure sensor data. Features like recurrence rate are used to train support vector machines to detect the onset of instability a few hundred milliseconds in advance. The performance of the proposed method is investigated on experimental data from a representative LOX/H research thrust chamber. In most cases, the method is able to timely predict two types of thermoacoustic instabilities on test data not used for training. The results are compared with state-of-the-art early warning indicators.
The excitation mechanism of a thermoacoustic instability in a 42-element research rocket thrust chamber with representative operating conditions with respect to European cryogenic rocket engines is investigated in detail. From previous research it was known that the chamber 1T mode can be excited by persistent heat release rate oscillations which are modulated by the resonant modes of the liquid oxygen injectors. The excitation source of the longitudinal injector eigenmodes is investigated in this study. Fibre-optical probes measuring the OH* dynamics from the recess volume of two injectors showed additional frequency content which could neither be explained by the chamber acoustics, nor the acoustics of the injection system. Instead, the temporal evolution of these frequencies correlate with the oxidizer flow velocity. In this work we show that the additional flame modulation originates from a hydrodynamic effect in the injection system. Even though the exact process cannot be precisely identified, an effect designated orifice whistling at the injector inlet orifice seems to be a likely candidate. Combining the new results with previous publications about this combustor, it is now possible to explain past and present observations in terms of the hydrodynamic and thermoacoustic conditions which are necessary for the combustion instability to appear. The conditions, which lead to an injection-driven excitation of the 1T mode are matching frequencies of the 2L mode of the injectors and the chamber 1T mode as well as a Strouhal number between 0.2 and 0.4 based on the length and flow velocity of the injector inlet orifice.