Blades tip leakage flow structure in axial compressors has dominant effects on flow stability and losses. Accordingly, in the present study, three different ideas are introduced for alleviation of undesirable effects of the blades tip leakage flow. These ideas utilize circumferential tape, S-shape nozzle and natural aspiration slot, all imposed upstream the rotor blades row. The method of investigation is based on numerical simulation of the governing flow field. Results, in terms of the flow field structure and performance curves are compared with those of the untreated case. Final results, showed that the natural aspiration idea works better than the other ones. In comparison to the plane case, it is accompanied by augmentation of 3.5% in the total pressure ratio and 3% in the surge margin. It was also found that the mass flow rate passing through the blades row tip gap has increased by 2.33 g/s in the natural aspiration case.
Due to the safe operation and stability of non-premixed combustion, it can widely be utilized in different engineering power and medical systems. The current paper suggests a mathematical asymptotic technique to describe non-premixed laminar flow flames formed in organic particles in a counter-flow configuration. In this investigation, fuel and oxidizer enter the combustor from opposite sides separately and multiple zones including preheating, vaporization, flame and post-flame zones were considered. Micro-sized lycopodium particles and air were respectively applied as a biofuel and an oxidizer. Dimensionalized and non-dimensionalized mass and energy conservation equations were determined for the zones and solved by Mathematica and Matlab software by applying proper boundary and jump conditions. Since lycopodium particles have numerous spores, the porosity of the particles was involved in the equations. Further, significant parameters such as lycopodium vaporization rate and thermophoretic force corresponding to the lycopodium particles in the solid phase were examined. The temperature distribution, flame sheet position, fuel and oxidizer mass fractions, equivalence ratio and flow strain rate were evaluated for the counter-flow non-premixed flames. Ultimately, the thermophoretic force caused by the temperature gradient at different positions was computed for several values of porosity, fuel and oxidizer Lewis numbers.
This paper presents results of aerodynamic enhancement of axial compressors utilizing optimum natural aspiration through a circumferential slot made within the casing wall upstream the rotor blades row. The method of investigation is based on numerical simulation of flow field. Geometries of the slot walls were optimized to find the maximum stall margin and pressure ratio of the compressor. The optimum case is accompanied by boosting more momentum within the blades tip region through the slot. Consequently, tip leakage vortex flow weakens and compressor stability margin increases. Final results showed that in comparison to the untreated casing, the optimum geometry of the slot causes the total pressure ratio and stall margin to increase by 4.2% and 3%, respectively. This state-of-the-art technique is simple and economic which can be easily implemented in practical cases while the compressor is exposed to commencement of flow instabilities in the forms of the rotating stall or surge phenomena.
1 April 2026 in Journal of Applied Fluid Mechanics
This study experimentally investigates the aerodynamic behavior of axial compressor blades under different surface roughness conditions. An open-circuit blowing-type wind tunnel was modified to conduct tests on a linear cascade of compressor blades. The experiments covered a Reynolds number range of 100,000 to 300,000 with a freestream turbulence intensity of 2%. Four surface roughness levels were tested in addition to a smooth reference blade. Hot-wire anemometry was employed to measure velocity profiles at several chordwise stations and to identifying the flow regimes as laminar, transitional or turbulent. The hot-wire surveys also helped detect the possible formation of laminar separation bubbles. Total pressure loss coefficients were measured for various Reynolds numbers and roughness levels. The results indicate that for smooth blades, the boundary layer remains fully laminar at Reynolds numbers below approximately 150000. At the lowest Reynolds number, introducing surface roughness reduced the total pressure loss, whereas at higher Reynolds numbers, roughness increased the losses and the smooth surface performed better. Surface roughness was found to suppress or shrink the laminar separation bubble and shift the transition onset upstream. Overall, the findings demonstrate how both the Reynolds number and surface finish quality affect flow regimes and aerodynamic losses. The present work provides quantitative data linking roughness parameters to aerodynamic performance, offering valuable insights for blade design optimization under different operating conditions.