Gelled fuels have promising applications in the aerospace field. Higher density and calorific value can be achieved with the addition of energetic metal particles to gelled fuels, which can also effectively improve the combustion efficiency of the fuel and thus enhance the engine performance. However, the addition of metal particles can also make the rheological properties of gelled fuels more complex, which introduces difficulties regarding their atomization and combustion. In order to investigate the effect of the concentration of metal particles on the rheological and atomization characteristics of gelled fuels, the gelled fuel was prepared with three metal particle concentrations of 0%, 15%, and 30%. In this paper, the rheological properties of the gelled fuel were tested by a rotational rheometer, and the atomization properties (spray cone angle, Sauter mean diameter (SMD), and droplet size distribution) of the gelled fuel were measured experimentally. In this paper, three nozzle structures were designed, including a DC nozzle, a swirl nozzle, and a self-excited oscillation nozzle. The effects of different nozzle structures and metal particle concentrations on the atomization of gelled fuels are compared and discussed.
The presence of microbubble significantly influences the rheological properties of a jet, thereby considerably increasing the complexity of the jet instability problem. However, the instability of microbubble jets has been rarely studied, and their breakup mechanism remains obscure. The present study was focused on conducting a comprehensive analysis of bubble jet flows. A high-precision experimental system was constructed to extract the time-series signals of each cross-sectional profile along the axial direction of a jet. Glycerol solutions with three different bubble volume fractions were prepared, and the standard deviation, spectral relationship, and nonlinear dynamical behavior (i.e., autocorrelation, phase space trajectory, Poincaré section, and Lyapunov exponent) were studied. The detailed development process of small surface disturbances in space was assessed, and the influence of variations in the bubble volume fraction on the nonlinear dynamics of the jet was examined. The results demonstrate that microbubbles can significantly change the energy transfer relationship between various sections of a jet and enhance the periodicity of the signal.
Spray evaporation is a classical fluid dynamic problem. Although many previous studies have been done, there are still blind spots in the knowledge of the turbulent spray evaporation mechanism. This work aims to reveal the evaporation mechanism of fuel droplets in high-temperature gas jet. First, a high-resolution direct numerical simulation method is used to solve the evaporation process of n-heptane droplets in a high-temperature air jet. Second, the interactions between different flow topology structures in the flow field and the curvature of the heat transfer interface is analyzed to elucidate the mechanism of the influence of flow topology on the evaporation process of n-heptane droplets in a high-temperature air jet. It can be observed that the unstable focus compressing (UFC) topology structure exerts the most significant influence on conditional strain rate of the flow field. Additionally, the curvature of the temperature iso-surfaces is negatively correlated with the conditional strain rate. It can also be found that the increasing of conditional strain rate in turn promotes the generation of sheet and concave structures, thus causes the heat transfer interfaces smoother and temperature scalar dissipation rate higher. Hence, increasing UFC topology structures may help improve evaporation efficiency.
About Me
Docter candidate of Beihang University
Research Interest: Liquid Jet Breakup Phenomena, Non-Newtonian Fluid Mechanics.
Docter candidate of Beihang University
Research Interest: Liquid Jet Breakup Phenomena, Non-Newtonian Fluid Mechanics.