The performances of aerostatic bearings have an important impact on machining accuracy in the ultraprecision machine tools. In this paper, numerical simulation is performed to calculate the static and dynamic performances of a double-pad annular inherently compensated aerostatic thrust bearing, while considering the effects of the upper bearing and lower bearing. The static results calculated by the computational fluid dynamics (CFD) method are compared with the finite difference method (FDM) for the specific model. By using polynomial fitting, the load-carrying capacity (LCC) of the bearing is calculated and the relationship between eccentricity ratio, design parameters, and static stiffness is analyzed. The active dynamic mesh method (ADMM) is applied to obtain the dynamic performance of the double-pad aerostatic thrust bearing based on the perturbation theory. Meanwhile, the effects of supply pressure, orifice diameter, squeeze number, and eccentricity ratio are comprehensively considered. Moreover, the step response of the double-pad thrust bearing is analyzed by using the passive dynamic mesh method (PDMM) based on dynamic equation. Related dynamic parameters including natural frequency are obtained through a system identification toolbox with Matlab, which can be used to avoid resonance. It is found that the dynamic calculation results computed by the ADMM and the PDMM are very close. The proposed method can be used to provide guidance for the design and optimization of the double-pad aerostatic thrust bearings.
28 January 2022 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Ultra-precision machining is widely used in the manufacturing of national defense and sophisticated civil products because of its high precision, nearly no surface damage and other advantages. The surface roughness of a workpiece is the key indicator of ultraprecision machining technology, which is affected by many factors in the process of machining. However, the existing surface roughness prediction model only considers a single error factor between the tool and workpiece, lacking comprehensive consideration of multisource error factors. Therefore, based on the research of the single error factor, multisource errors that affect the surface roughness of a workpiece in machining was investigated in this paper. A prediction model of workpiece surface roughness under multisource error affecting was established to improve the accuracy of prediction models. According to the vibration model, the sensitive direction of roughness can be determined. In the axial direction, the error of each point on the surface is superimposed with the theoretical surface shape to obtain the final surface profile. The three-dimensional morphology was established and the two-dimensional topography can be obtained by intercepting the three-dimensional topography. The roughness simulation value is obtained by extracting the peak value of each point of the two-dimensional topography. A single-point diamond turning experiment is performed to verify the simulation models. The result concluded from the experiment is compared with the simulation result, showing that the error between the simulation and the experiment is less than 4%, which is of great significance to optimizing machining process parameters and improving machining precision of workpiece surfaces for ultraprecision single point diamond turning.
The application range of potassium dihydrogen phosphate (KDP) crystals can be expanded by enhancing their surface quality properties. Therefore, a method for controlling the surface-temperature field of various materials was developed to expand the plastic zone to overcome the difficulty in processing KDP crystals. The ductile/brittle transition depth of the KDP crystals was determined using a 38 nm nanoindentation experiment. The nanoscratch experiment revealed the rules of how the transformation depth of the KDP crystals changes with temperatures, and the effect of temperature on the microstructure of the KDP crystals was studied. Finally, KDP crystal surfaces were processed using a UPDFC machine at elevated temperatures. According to our experiments, the surface roughness of the KDP crystal reached 5.275 nm as temperature increased, thus enhancing its surface quality. This method could be applied to other brittle materials.
21 October 2023 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Microstructures of specified shapes have been widely applied in electronics, communication, optics, avionics, medical science, and the automotive field. The ultraprecision single-point diamond turning lathe is a core instrument used in microstructure preparation. As a key technical indicator of an ultraprecision lathe, the servo control accuracy of a system directly affects the machining accuracy of the lathe. Because the profile error of microstructures machined by the slow tool servo of the ultraprecision lathe is at the micrometer level, any disturbance reduces the accuracy of parts machining. This paper proposes a tracking error prediction model based on the force–displacement coupled servo model to study the mechanism of action for the cutting force disturbance on a servo control system. The repeated positioning error of an ultraprecision lathe’s linear axis is added to the force–displacement coupled servo model to propose a more practical profile error prediction model and analyze the effect of the cutting force on the part profile. The experimental results indicate that the force–displacement coupled servo tracking error and profile error prediction model proposed in this paper is more accurate than the existing tracking error modeling method without cutting force disturbance. In addition, this paper analyzes how the cutting force in ultraprecision machining affects the servo system and part profile, which provides a reference for subsequent ultraprecision lathe error analysis and improved machining accuracy.
1 October 2026 in IEEE Transactions on Industrial Electronics
Taking advantage of linear Halbach array-based actuators, we developed a large-stroke electromagnetic tri-axial nanopositioning stage with high compactness. With the Halbach array-based actuator, dual-axial decoupled forces normal and tangential to the array surface are generated by adopting position-dependent three-phase excitation currents. By employing four sets of actuators arranged in an axis-symmetric manner, the eight independent driving forces supported by compliant bearings can generate tri-axial decoupled motions. After modeling the electromagnetic and mechanical performance of the stage, a two-phase optimization approach was developed to optimize system parameters to achieve the desired strokes and maximize the resonant frequencies for the stage. The optimum design was then verified by finite element analysis (FEA). Experimental testing on the prototype suggested tri-axial strokes of 960 $\boldsymbol{\mu}$ m ( X ), 990 $\boldsymbol{\mu}$ m ( Y ), and 1010 $\boldsymbol{\mu}$ m ( Z ), as well as a first-order resonant frequency of 86.3 Hz. In addition, by developing a compound controller, its nanopositioning capability was demonstrated by achieving a closed-loop motion resolution of 30 nm and a spatial trajectory tracking error within $\boldsymbol{\pm}$ 1.5% of the full motion span.