The dielectric, piezoelectric and physical properties of the [001]-oriented rectangular plate and beam mode of Pb[(Mg 1/3 Nb 2/3 ) 0.52 (Yb 1/2 Nb 1/2 ) 0.15 Ti 0.33 ]O 3 (PMN-PYbN-PT) ternary single crystals (SC) poled by alternate current poling (ACP) were investigated. The dielectric permittivity and average piezoelectric coefficient d33 were 6800 and 2490 pC/N, respectively, for the rectangular plate sample after ACP, which were 31% and 41% larger than those of the same sample after conventional direct current poling. The highest value of d33 reached 2750 pC N −1 . The dielectric loss was reduced by 31%; nevertheless, the d33 improved after ACP. The beam mode electromechanical coupling factor ( ) was 91% by using ACP, showing the highest value among all relaxor-PT SC systems reported so far. The regular periodic stripe domains were observed in ACP samples, showing high domain wall density and uniform domain size. This work demonstrates that the high performance after ACP is an effective method of improving the relaxor-PT SC transducers.
Linear dielectric and ferroelectric (FE) materials as dielectric capacitors have low energy density, which limits their application in high pulse power systems. As an alternative, antiferroelectric (AFE) materials have superior recoverable energy storage density and ultrafast discharge times due to their electric field induced phase transition. Herein, we report lead lutetium niobate (PLN)-based ceramic, which is an alternative AFE material due to its significantly enhanced energy storage density (6.43 J cm−3) compared to popular Pb(Zr,Ti)O3 (PZT)-based and lead-free perovskite AFE ceramics. Structural analysis revealed evidence of two types of AFE super-lattice. The energy storage properties remain stable up to 200 °C. Surprisingly, the PLN-based system exhibited the fastest known discharge (90% of the discharge energy density released in about 20 ns) and good fatigue resistance. The ultrafast discharge and the stabilities of the AFE/FE phases were explained using the Ginzburg–Landau–Devonshire (GLD) phenomenon. This study in AFE energy storage provides a potential alternative for application in pulse power devices.