Linear dielectric and ferroelectric (FE) materials as dielectric capacitors have low energy density, which limits their application in high pulse power systems. As an alternative, antiferroelectric (AFE) materials have superior recoverable energy storage density and ultrafast discharge times due to their electric field induced phase transition. Herein, we report lead lutetium niobate (PLN)-based ceramic, which is an alternative AFE material due to its significantly enhanced energy storage density (6.43 J cm−3) compared to popular Pb(Zr,Ti)O3 (PZT)-based and lead-free perovskite AFE ceramics. Structural analysis revealed evidence of two types of AFE super-lattice. The energy storage properties remain stable up to 200 °C. Surprisingly, the PLN-based system exhibited the fastest known discharge (90% of the discharge energy density released in about 20 ns) and good fatigue resistance. The ultrafast discharge and the stabilities of the AFE/FE phases were explained using the Ginzburg–Landau–Devonshire (GLD) phenomenon. This study in AFE energy storage provides a potential alternative for application in pulse power devices.
7 January 2020 in ACS Applied Materials & Interfaces
Piezoelectric and dielectric properties of [001] and [110]-oriented tetragonal Pb(In1/2Nb1/2)-Pb(Mg1/3Nb2/3)-PbTiO3 (PIN-PMN-PT) single crystals (SCs) after alternate current poling (ACP) were investigated. Compared with direct current poling (DCP), the piezoelectric and dielectric properties of [001]-oriented samples have no improvement, while the piezoelectric coefficient d33 and free dielectric constant of [110]-oriented samples increase by 32% and 26%, respectively. The domain was observed on (001) and faces of [110]-oriented samples. The enhancement of the piezoelectric performance is attributed to the high density of domain wall, increase of distorted regions between 90° domains, and monoclinic phase. Compared with DCP, both intrinsic and extrinsic contributions enhance after ACP though the Rayleigh analysis. This work indicates that ACP is an effective way to enhance piezoelectric properties of non-polar axis oriented relaxor-PT ferroelectric SCs.
Lanthanide doping is widely employed to tune structural change temperature and electrical properties in ABO3-type perovskite ferroelectric materials. However, the reason that A-site lanthanide doping leads to the decrease of the Curie temperature is still not clear. Based on the reported Curie temperature of lanthanides (Ln) doped in two classic ferroelectrics PbTiO3 and BaTiO3 with A2+B4+O3-type perovskite structure, we discussed the relationship between the decrease rate of Curie temperature (ΔTC) and the bond strength variance of A-site cation (σ). For Nd ion doped Pb(Mg1/3Nb2/3)O3-PbTiO3 (Nd-PMNT) ferroelectric crystal as an example, the internal factors of the dramatic decline of the Curie temperature induced by A-site Nd doping were investigated under a systematic study. The strong covalent bonds of Ln-O play an important role in A-site Ln composition-induced structural change from ferroelectric to paraelectric phase, and it is responsible for the significant decrease in the Curie temperature. It is proposed that the cells become cubic around the Ln ions due to the strong covalent energy of Ln-O bonding in A-site Ln doped A2+B4+O3 perovskite ferroelectrics.