The nanocomposites of PVDF/FLG and PVDF/GO are prepared using the solution casting method for varying concentrations of FLG and GO from 0.1 to 1 wt% in PVDF matrix. The effect and dispersion of FLG and GO are observed with help of Scanning electron microscopy (SEM) and x-ray diffraction confirming the good dispersion of FLG and GO in the matrix. The samples are also characterized for thermal and mechanical properties using Differential scanning calorimetry (DSC) and universal testing machine (UTM). FLG and GO nanofillers seemed to increase the tensile strength from 10 MPa to 20 MPa and variation in crystallinity to get maximum output in terms of β phase which can be utilized for piezoelectric and pyroelectric behavior of PVDF polymer.
Magnetic sensors are key elements in many industrial, security, military, and biomedical applications. Heusler alloys are promising materials for magnetic sensor applications due to their high spin polarization and tunable magnetic properties. The dynamic field range of magnetic sensors is strongly related to the perpendicular magnetic anisotropy (PMA). By tuning the PMA, it is possible to modify the sensing direction, sensitivity and even the accuracy of the magnetic sensors. Here, we report the tuning of PMA in a Co2MnGa Heusler alloy film via argon (Ar) ion irradiation. MgO/Co2MnGa/Pd films with an initial PMA were irradiated with 30 keV 40Ar+ ions with fluences (ions·cm−2) between 1 × 1013 and 1 × 1015 Ar·cm−2, which corresponds to displacement per atom values between 0.17 and 17, estimated from Monte-Carlo-based simulations. The magneto optical and magnetization results showed that the effective anisotropy energy (Keff) decreased from ~153 kJ·m−3 for the un-irradiated film to ~14 kJ·m−3 for the 1 × 1014 Ar·cm−2 irradiated film. The reduced Keff and PMA are attributed to ion-irradiation-induced interface intermixing that decreased the interfacial anisotropy. These results demonstrate that ion irradiation is a promising technique for shaping the PMA of Co2MnGa Heusler alloy for magnetic sensor applications.
30 September 2020 in AIUB Journal of Science and Engineering (AJSE)
The traffic controlling system in Bangladesh has not been updated enough with respect to fast improving technology. As a result, traffic rules violation detection and identification of the vehicle has become more difficult as the number of vehicles is increasing day by day. Moreover, controlling traffic is still manual. To solve this problem, the traffic controlling system can be digitalized by a system that consists of two major parts which are traffic rules violation detection and number plate recognition. In this research, these processes are done automatically which is based on machine learning, deep learning, and computer vision technology. Before starting this process, an object on the road is identified through the YOLOv3 algorithm. By using the OpenCV algorithm, traffic rules violation is detected and the vehicle that violated these rules is identified. To recognize the number plate of the vehicle, image acquisition, edge detection, segmentation of characters is done sequentially by using Convolution Neural Network (CNN) in MATLAB background. Among the traffic rules, the following traffic signal is implemented in this research.
This PhD research investigates the voltage control of magnetic anisotropy (VCMA) in CoFeB and Co2MnGa-based thin film stacks with perpendicular magnetic anisotropy, towards a voltage-controlled magnetic sensor based on magnetic tunnel junctions. Here I explored both reversible and irreversible changes in magnetic properties under different experimental conditions. The study primarily utilises ionic liquid gating (ILG) to modulate coercivity and anisotropy in these materials.In CoFeB stacks, two configurations of the stack with variable thicknesses of materials were tried for achieving perpendicular magnetic anisotropy (PMA). The reversible control of PMA in CoFeB was demonstrated through repeated voltage cycling, with measurable transition times. In addition, through the patterning of magnetic tunnel junctions (MTJs), I improved both their design and tunnel magnetoresistance (TMR), achieving up to ~27% TMR in CoFeB-based thin film stacks.For PMA Co2MnGa-based thin films, cyclic gate voltages produce distinct coercivity trends depending on the film thickness. In thinner (2 nm) Co2MnGa layers, coercivity decreases while the thicker (3.8 nm) films exhibit increased coercivity with voltage cycling. These findings indicate irreversible coercivity changes with ILG in both thicknesses of Co2MnGa. Through patterning of MTJs in Co2MnGa-based films, I demonstrated the first Co2MnGa-based MTJs made from two PMA Co2MnGa layers and achieved ~11% TMR, highlighting the material's potential for tunnel magnetoresistance applications.To achieve reversible control in Co2MnGa (3.8 nm) stacks, Neon ion irradiation (30 keV, 1014 Ne+·cm2) was employed, resulting in reversible coercivity changes during subsequent ILG experiments. This demonstrates that ion mobility is a driver of coercivity changes with ILG and the formation of open sites through irradiation can lead to increased ion mobility, leading to more reversible anisotropy changes.Additionally, I performed experiments to control magnetic anisotropy using two different voltage-control techniques. I demonstrated piezoelectric control of the hysteresis loop of in-plane magnetised CoFeB thin films, providing insights into tuning anisotropy through piezoelectric strain. I also explored a recently published method of using spin-orbit torque (SOT) for 3D magnetic field sensing, using Co2MnGa-based thin films. Further optimisation of my structures is necessary for full three-axis sensing.These findings contribute to the understanding of VCMA and ion-induced modifications in magnetic thin films, offering new perspectives on the design of structures for voltage-tunable magnetoresistive sensors and other voltage-tunable spintronic devices.