Abel Cardoso Gonzaga Neto

Mr. Abel Cardoso Gonzaga Neto

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 July 2023 in C
Verified
Journal Article
Open access
PDF file
NBNatália Garrote de Barros
Natália Garrote de Barros
ANAbel Cardoso Gonzaga Neto
Abel Cardoso Gonzaga Neto
KVKleber Bitencourt Vaccioli
Kleber Bitencourt Vaccioli
HAHugo Rafael Vallejo Angulo
Hugo Rafael Vallejo Angulo
LSLeonardo Gondim de Andrade e Silva
Leonardo Gondim de Andrade e Silva
TVTiciane Sanches Valera
Ticiane Sanches Valera
This paper presents a comparison of traditional thermal and chemical reduction methods with more recent ionizing radiation reduction via gamma rays and electron beams (e-beams). For GO, all synthesis protocols were adapted to increase production scale and are a contribution of this work. The typical Raman D-band of the GO was prominent (ID/IG ratio increased sixfold). When comparing the GO reduction techniques, dramatic differences in efficiency and GO particle characteristics were observed. Although thermal and chemical reduction are effective reduction methods, as shown through the use of FTIR spectroscopy and the C/O ratio from EDS chemical analysis, the thermal process renders great weight losses, whereas chemical processing may involve the use of hazardous chemical compounds. On the other hand, comparing the gamma rays and e-beam for 80 kGy, the Raman spectra and chemical analysis suggested that the e-beam caused a greater GO reduction: C/O ratio from EDS of 5.4 and 4.1, respectively. In addition to being fast and effective, ionizing radiation reduction processes allow easier control of the reduction degree by adjusting the radiation dose. When the dose increased from 40 to 80 kGy, the Raman spectra and EDS showed that the ID/IG and C/O ratios increased by 15 and 116%, respectively.

31 October 2025 in Minerals
Verified
Journal Article
Open access
PDF file
CAChristiano Gianesi Bastos Andrade
Christiano Gianesi Bastos Andrade
GSGabriel Santos
Gabriel Santos
MCMichael Cezar Camargo
Michael Cezar Camargo
ANAbel Cardoso Gonzaga Neto
Abel Cardoso Gonzaga Neto
TVTiciane Sanches Valera
Ticiane Sanches Valera
STSamuel Marcio Toffoli
Samuel Marcio Toffoli
Clay/natural rubber (Clay–NR) nanocomposites are a sustainable material class with a wide range of applications. The type and amount of the filler added to the rubber matrix promote significant changes in the matrix properties. Montmorillonitic clays (MMT) are mineral, natural fillers. This study investigates the effect of a modified Brazilian polycationic MMT on the nanocomposite rheology and mechanical properties. The MMT was incorporated into a NR matrix in its natural state, and after modification by cation exchange (MMTNa) and organophilization (MMTORG), at concentrations of 2.5 and 5 phr (parts per hundred parts of rubber). The natural and modified clays were characterized by XRD, FTIR, BET, and SEM/EDS. Mechanical tests (tensile strength, elongation at break, and modulus at 100%) indicated that the use of MMTNa led to increased strength and modulus, whereas a minor decrease in the elongation was observed. However, the use of MMTORG yielded the most significant improvements in the mechanical properties. The rheology tests indicated that the Payne effect was not observed, and the strain-dependent behavior arises from matrix-dominated mechanisms, rather than disruption of a filler network. Vulcanization curves showed that the NR-MMTORG composites exhibited higher torque values, corroborated by higher crosslink densities. These findings highlight the critical role of cation exchange modification in optimizing MMT dispersion and interfacial interactions within NR matrices, providing design principles for high-performance sustainable nanocomposites.

29 January 2026 in Minerals
Verified
Journal Article
Open access
PDF file
MCMichael Cezar Camargo
Michael Cezar Camargo
ANAbel Cardoso Gonzaga Neto
Abel Cardoso Gonzaga Neto
STSamuel Marcio Toffoli
Samuel Marcio Toffoli
TVTiciane Sanches Valera
Ticiane Sanches Valera
Kaolin is an abundant, low-cost filler for elastomeric compounds. The kaolin used here is primarily kaolinite, chemically clean, and contains a fine particle population. Although agglomeration is evident, it can be mitigated by appropriate physical processing and, when desired, by chemical coupling. This study evaluates kaolin in natural rubber (NR) and examines how adding bis(triethoxysilylpropyl) tetrasulfide (TESPT) during mixing affects filler–matrix compatibility, viscoelastic response, cure stability, and mechanical performance. Kaolin was structurally and morphologically characterized, and the compounds were prepared in a closed mixer coupled to a torque rheometer under controlled dispersion conditions. Part 1 assessed NR with kaolin without a coupling agent, and Part 2 assessed the NR–kaolin with TESPT added during mixing (0.5 and 5 phr). Small-amplitude oscillatory shear (SAOS) was used to probe viscoelastic behavior, while oscillating disk rheometry (ODR) and tensile tests quantified cure and mechanical properties. In Part 1, kaolin increased NR stiffness in SAOS and raised the 100% and 300% moduli by about 40% and 50%, respectively, relative to the unfilled NR compound, while reducing cure reversion from 30% to 10% at 150 °C. In Part 2, TESPT produced a threshold-like response: 0.5 phr caused only minor changes, whereas 5 phr led to pronounced stiffening and cure stabilization. At 5 phr, a low-frequency plateau in G′ below 0.1 Hz with no G′–G″ crossover was observed, accompanied by higher MH and ΔM in ODR and reversion suppressed to 1% after 30 min. These trends indicate the formation of a more connected filler-rubber network, promoted by TESPT-assisted interfacial coupling/adhesion, while also reflecting the ability of TESPT (tetrasulfide) to contribute sulfur and modify the curing chemistry. Mechanically, kaolin produced marked stiffness increases, with the 100% and 300% moduli increasing by an additional 9% and 36%, respectively, at 5 phr TESPT. At the same time, ultimate tensile strength remained lower than that of neat NR, and elongation at break decreased slightly. Overall, adding TESPT during mixing enhances interfacial coupling and network connectivity and, at higher loading, also influences cure chemistry, yielding higher modulus and strongly improved reversion resistance without increasing ultimate tensile strength relative to neat NR.

9 December 2021
Verified
Thesis
Open access
PDF file
ANAbel Cardoso Gonzaga Neto
Abel Cardoso Gonzaga Neto
Estudos da literatura já demonstraram que a incorporação de óxido de grafeno (GO) a diferentes tipos de elastômeros pode diminuir de maneira significativa a energia de ativação durante o processo de vulcanização....