The Chinese High-resolution Earth Observation System (CHEOS) program has successfully launched 7 civilian satellites since 2010. These satellites are named by Gaofen (meaning high resolution in Chinese, hereafter noted as GF). To combine the advantages of high temporal and comparably high spatial resolution, diverse sensors are deployed to each satellite. GF-1 and GF-6 carry both high-resolution cameras (2 m resolution panchromatic and 8 m resolution multispectral camera), providing high spatial imaging for land use monitoring; GF-3 is equipped with a C-band multipolarization synthetic aperture radar with a spatial resolution of up to 1 meter, mostly monitoring marine targets; GF-5 carried 6 sensors including hyperspectral camera and directional polarization camera, dedicated to environmental remote sensing and climate research, such as aerosol, clouds, and greenhouse gas monitoring; and GF-7 laser altimeter system payload enables a three-dimensional surveying and mapping of natural resource and land surveying, facilitating the accumulation of basic geographic information. This study provides an overview of GF civilian series satellites, especially their missions, sensors, and applications.

Cloud detection by passive satellite sensors is very challenging in hazy weather over China because the reflective characteristics of haze and clouds are very similar. Consequently, hazy areas tend to be mistaken as cloudy or clear areas by current cloud mask algorithms. The Advanced Himawari Imager (AHI) aboard Himawari‐8 is a multispectral Earth observation sensor with high temporal and spatial resolutions. A cloud and haze detection algorithm for AHI measurements is urgently needed for monitoring atmospheric pollution and its transport over China. This study presents the new Himawari‐8 Cloud and Haze Mask (HCHM) algorithm that classifies image pixels from central and eastern China into one of three categories: clear, cloudy, or hazy. Based on the observations that haze occurs near the ground and accumulates in low‐elevation plains and basins while clouds form at high altitudes, the proposed HCHM algorithm incorporates altitude information to adjust the thresholds used in the selected threshold tests to separate haze and cloud pixels. We find that combining auxiliary digital elevation model data with traditional indicators, such as the R_0.86/R_0.64, R_0.86/R_1.6, and BT₁₁‐BT_3.9, improves the accuracy of cloud and haze discrimination. The HCHM algorithm is applied to Himawari‐8 observations from August 2015, November 2015, January 2016, and May 2016 and validated against the Cloud‐Aerosol Lidar and Infrared Pathfinder Satellite Observation vertical feature mask results. The validation shows that the average leakage rate, false alarm rate, and haze missing rate of the HCHM algorithm are 3.95%, 5.88%, and 4.17%, respectively.

The detection of supercooled water clouds (SWCs) is essential for artificial rain enhancement, the prevention of aircraft ice accretion, and better understanding of radiative energy balance. However, it is challenging to identify SWCs using only passive satellite measurements. We adopt measurements from the Advanced Himawari Imager, which is onboard the new‐generation, high temporal, spatial, and spectral resolution geostationary Himawari‐8 satellite, to develop a time‐continuous Himawari‐8 SWC (HSWC) algorithm. The HSWC algorithm includes a group of tests using comprehensive cloud properties (e.g., cloud phase [CPH], cloud top temperature, cloud optical thickness, and cloud effective radius [CER]). Unlike previous SWC detection algorithms, which are based on cloud top temperature and cloud optical thickness properties, we introduce CER and CPH information into the HSWC algorithm because the distribution of SWCs is sensitive to CER values, and SWCs may appear in mixed‐phase clouds identified by satellites. Our analyses indicate that the additions of the CER and CPH tests could improve the performance of SWC detection by 15.07% and 4.75%, respectively. The full disk SWC detection results identified by the HSWC algorithm in January, May, August, and October of 2017 are validated using lidar measurements. The hit rate and false alarm rate are 93.52% and 25.27%, respectively. Our study provides potential SWC regions for the implementation of artificial rain enhancement.

Surface downward longwave radiation (SDLR) is significant with regard to surface energy budgets and climate research. The uncertainty of cloud base height (CBH) retrieval by remote sensing induces the vast majority of SDLR estimation errors under cloudy conditions; reliable CBH observation and estimation are crucial for determining the cloud radiative effect. This study presents a CBH retrieval methodology built from 10 thermal spectral data from Himawari-8 (H-8) observations, utilizing the random forest (RF) algorithm to fully account for each band’s contribution to CBH. The algorithm utilizes only infrared band data, making it possible to obtain CBH 24 h a day. Considering some factors that can significantly affect the CBH estimation, RF models are trained for different clouds using inputs from multiple H-8 channels together with geolocation information to target CBH derived from CloudSat/CALIPSO combined measurements. The validation results reveal that the new methodology performs well, with a root-mean-square error (RMSE) of only 1.17 km for all clouds. To evaluate the effect of CBH on SDLR estimation, an all-sky SDLR estimation algorithm based on previous CBH predictions is proposed. The new SDLR product not only has a resolution that is noticeably higher than that of benchmark products of the SDLR, such as the Clouds and the Earth’s Radiant Energy System (CERES) and the next-generation reanalysis (ERA5) of the European Centre for Medium-Range Weather Forecasts (ECMWF), but it also has greater accuracy, with an RMSE of 21.8 W m⁻² for hourly surface downward longwave irradiance (SDLI).