Background/Objectives: The unique properties of iron oxide nanoparticles have attracted significant interest within the biomedical community, particularly for magnetic hyperthermia applications. Various synthesis methods have been developed to optimize these nanoparticles. Methods: In this study, we employed a powdered coconut water (PCW)-assisted sol–gel method to produce magnetite nanoparticles for the first time. A comprehensive analysis of the thermal (differential thermal analysis and thermogravimetry), structural (X-ray diffraction), morphological (scanning electron microscopy with energy dispersive spectroscopy), magnetic (vibrating sample magnetometer and hyperthermia), and biological (cytotoxicity essays) properties was conducted to assess their potential for magnetic hyperthermia. Results: Samples heat-treated at 700 °C and 400 °C (washed powder) for 4 h under argon presented only magnetite in their composition. The micrometer-sized particles exhibited ferrimagnetic behavior, with saturation magnetization values of 37, 76, and 10 emu/g and specific absorption rates (SAR) of 27.1, 19.9, and 14.1 W/g, respectively, for treatments at 350 °C (48 h), 700 °C (4 h), and 400 °C (washed powder, 4 h) under an argon atmosphere. Biological tests showed no cytotoxicity below 10 mg/mL. Conclusions: The findings highlight the potential of PCW-assisted synthesis as a sustainable and efficient strategy for producing pure magnetite, with powder washing preceding the heat treatment enabling the attainment of this phase at lower temperatures. Nevertheless, the micrometer-scale dimensions is observed in the morphological analysis limit their suitability for biomedical applications.

Bioglasses have been used throughout the past century as a biomaterial in the bone regeneration field. However, recent studies have attempted to use them as a therapeutic material as well, mainly in the treatment of osteosarcomas. The most widely recognized bioglass is the 45S5 Bioglass, invented by Larry Hench et al., which presents higher bioactivity. A possible application of this bioglass in the treatment of osteosarcomas can be accomplished by adding specific ions, such as iron, that will allow the use of magnetic hyperthermia and Fenton reaction as therapeutic mechanisms. In this study, a 45S5 Bioglass containing 10%mol of Fe₂O₃ was produced using the melt-quenching method. A group of samples was prepared by changing the overall ball milling time, from 1 h up to 48 h, to analyze the effects of iron in the bioactive glass matrix and evaluate the influence of particle size on their physical and biological properties. The studied bioglasses showed no evidence of changes in the amorphous structural nature compared to the 45S5 Bioglass. The data of the impedance spectroscopy study revealed that the addition of Fe₂O₃ can increase the standard rate constant of the Electro-Fenton reaction, with the sample milled for 12 h showing the most promising results. The reduction in the particle size influenced the cytotoxicity and the bioactivity. The samples with lower particle sizes showed a higher level of cytotoxicity.

The long-term success of orthopedic implants depends not only on their mechanical performance but also on their ability to establish a stable and biologically active interface with surrounding tissues. Despite the widespread clinical use of metallic, ceramic, and polymeric biomaterials, implant failure remains associated with insufficient osseointegration, bacterial infection, wear, corrosion, and adverse immune responses. This review provides a comprehensive overview of conventional biomaterials used in orthopedic implants and critically examines current surface engineering strategies developed to improve implant performance and longevity. Particular emphasis is placed on coating technologies, including sol–gel processing, electrochemical deposition, plasma spraying, physical and chemical vapor deposition, and CoBlast™, highlighting their influence on coating adhesion, bioactivity, and clinical performance. Recent developments in bioactive, antibacterial, immunomodulatory, and stimuli-responsive coatings are discussed, together with advances in therapeutic ion incorporation, extracellular matrix-inspired functionalization, and smart drug-delivery systems. Furthermore, the emerging role of osteoimmunomodulation, additive manufacturing, and patient-specific implant design is examined as a key driver for the next generation of orthopedic devices. By integrating materials science, surface engineering, and biological mechanisms, this work highlights current challenges and future opportunities in orthopedic implant technology, offering valuable insights for the development of safer, longer-lasting, and more biologically responsive implant systems.