This article reviews the current scenario and the main uncertainties and challenges associated with implementing Sustainable Aviation Fuel (SAF) in Colombia, from which it determines the possible certified technologies under the ASTM D 7566 standard as well as co-processing technologies contemplated within the ASTM D 1655 standard, more suitable for the implementation of SAF production. Likewise, through the PESTEL tool (Political, Economic, Social, Technological, Environmental, and Legal), a diagnosis is made in order to obtain an updated overview of the implementation of SAF in Colombia. Based on the above, it provides recommendations to mitigate the uncertainties identified, and it is complemented by the ECOCANVAS tool, which applies to businesses related to the circular economy, and also include the net production potential of SAF in Colombia, considering the production of feedstock, in agricultural residue of sugarcane, oil palm, corn, and coffee. This study concludes with some policy recommendations that can make SAF implementation viable and allow responsible institutions to organize themselves for better strategic action and identify the fields of research and the need for investment in R + D + i to strengthen the supply chain.
Aeronautic transport is a leading energy consumer that strongly contributes to greenhouse gas emissions due to a significant dependency on fossil fuels. Biodiesel, a substitution of conventional fuels, is considered as an alternative fuel for aircrafts and power generation turbine engines. Unfortunately, experimentation has been mostly limited to small scale turbines, and technical challenges remain open regarding operational safety. The current study presents the facility, the instrumentation, and the measured results of experimental tests in a 640 kW full-scale J69-T-25A turbojet engine, operating with blends of Jet A1 and oil palm biodiesel with volume contents from 0% to 10% at different load regimes. Findings are related to the fuel injection system, the engine thrust, and the emissions. The thrust force and the exhaust gas temperature do not expose a significant variation in all the operation regimes with the utilization of up to 10% volume content of biodiesel. A maximum increase of 36% in fuel consumption and 11% in injection pressure are observed at idle operation between B0 and B10. A reduction of the CO and HC emissions is also registered with a maximum variation at the cruise regime (80% Revolutions Per Minute—RPM).
4 September 2020 in Reaction Kinetics, Mechanisms and Catalysis
Biofuels are important additives to conventional fuels in combustion engines of the transport sector, as they reduce atmospheric emissions and promote environmental-friendly production chains. The mechanical and thermal performance of a PT6A-61A engine on a test bench of the Colombian Air Force operating with blends of JETA-1 and Biodiesel up to 25% volume values of substitution is evaluated in this work. Experimental results show that blends are operationally reliable up to 15% volume content. In that range, the engine operation is not compromised in terms of response variables. Moreover, experimental properties of fuel blends show that the freezing point—which is the most critical variable, does not comply with aeronautical regulations. The system dynamics are subject to several variations in the test parameters, which mainly affected fuel flow, Inter-Turbine Temperature (ITT), and engine performance. A Principal Component Analysis (PCA) is performed over the experimental results to quantify possible disturbances on the bench measurements. This is based on the fact that the study is restrained to stationary test bench conditions.
En los almacenes de la Fuerza Aérea Colombiana, se almacenan repuestos aeronáuticos y armamento aéreo adquiridos durante momentos críticos del conflicto armado, los cuales están próximos a alcanzar su vida útil. Dadas las políticas de los fabricantes, que incluyen factores de seguridad en el diseño y la determinación de la vida útil, es prioritario estudiar la posible ampliación del tiempo de servicio de este material, siempre y cuando se mantengan los requisitos de seguridad y calidad establecidos por el fabricante. Este artículo analiza diversas metodologías para evaluar y extender la vida útil de sistemas y materiales militares, centrándose en los documentos AECTP-600, MIL-HDBK-1763, JOTP-001, y otros estudios relevantes. El AECTP-600 de la otan) presenta un método de diez pasos que incluye análisis de diseño, gestión de riesgos y pruebas, y optimización de desempeño. El MIL-HDBK-1763 del Departamento de Defensa de Estados Unidos se centra en la compatibilidad y el mantenimiento de cargas útiles en aeronaves, mientras que el JOTP-001 proporciona pautas para evaluar la seguridad y eficacia de municiones no nucleares. Además, se revisan estudios como el de Mark Ashcroft sobre la gestión de la vida útil de municiones, y el análisis de Štefan Pivko y Štefan Timár sobre el impacto de las condiciones de almacenamiento. La Fuerza Aérea Colombiana aplicó estos principios para extender la vida útil del sistema de guiado GBU-49, documentando el proceso en el Plan de Certificación de Producto Aeronáutico, validado por la Oficina de Certificación Aeronáutica de la Defensa, mediante el cual se realizaron pruebas exhaustivas y análisis estadísticos para proyectar la degradación de los componentes críticos, resultando en una extensión de vida útil de cinco años. Este enfoque garantizó la seguridad y funcionalidad del sistema, demostrando la importancia de una evaluación rigurosa y la gestión de riesgos en la extensión de la vida útil de materialesmilitares.