Orthotropic steel bridge decks (OSDs) play a key role in long-span bridges, and full-penetration welding technology is crucial to improve their structural performance. This study proposes an innovative single-sided full-penetration welding rib-to-deck (RTD) joint technology. The accuracy of the numerical simulation in predicting the temperature field and stress field was verified by the combination of an experimental and numerical simulation, and the welding residual stress (WRS) of single-sided full-penetration welded RTD joints was analyzed. In addition, the effects of different welding parameters and RTD joint geometry on the WRS are discussed. The results show that the experimental results are consistent with the simulation results, indicating that the single-sided full-penetration welding technology without a groove is feasible. The WRS shows a peak tensile stress near the weld, which gradually decreases and transforms into compressive stress as the distance increases. In addition, the WRS of the roof surface and the U-rib surface increases slightly with the increase in the roof thickness and the welding speed. The research results are of great significance to optimize the welding process, improve the fatigue performance, and prolong the service life of steel bridge decks, providing a new technical method for bridge engineering.
An iterative correction method for the stress release coefficient, leveraging numerical simulation, has been innovatively developed to address the significant error issues associated with the blind-hole method in high-stress residual stress testing of steel structures. This method effectively reduces measurement error in high residual stress regions through a discriminant iteration process. The finite element analysis technology was employed to accurately simulate the blind-hole method’s test process, and additionally, Python was utilized for customizing the secondary development of ABAQUS software, thereby automating and optimizing the method. When compared with simulation and experimental data from the welding process, the efficiency, accuracy, and reliability of the correction method have been verified. The proposed method eliminates the need for tedious calibration experiments inherent in traditional methods, significantly enhancing the test’s automation level and convergence speed, and ensuring measurement accuracy, which provides an innovative solution for the accurate evaluation of residual stress in steel structures.